Add User
The following topic describe the fields on the Administration > Users, Roles & AAA > Users > Add User page:
-
Users, Roles & AAA > Users > Add User > Lobby Ambassador Defaults Tab
Users, Roles and AAA > Users Add User > Lobby Ambassador Defaults Tab
The following table describes the fields on Administration > Users, Roles & AAA > Users > Add Users > Lobby Ambassador Defaults
Field |
Description |
---|---|
Profile |
Select the profile to which the guest users would connect. |
User Role |
Choose a user role for the guest user from the drop-down list. User roles are predefine by the administrator and are associated with the access of the guest (such as contractor, customer partner, vendor, visitor, and so on. User Role is used to manage the amount of bandwidth allocated to specific users within the network. |
Lifetime |
Define how long the guest user account remains active by choosing one of the following options: Limited—Choose the period of time that the guest user account is active using the hours and minutes drop-down lists. The default value for Limited is one day (8 hours). Unlimited—There is no expiration date for the guest account. |
Apply to |
From the drop-down list, choose one of the following: Indoor Area—Campus, Building, and Floor. Outdoor Area—Campus, Outdoor Area. Controller List—List of controller(s) on which the selected profile is created. Config Groups—Config group names configured on the Prime Infrastructure. |
Email Id |
(Optional) Enter the e-mail ID of the host to whom the guest account credentials are sent. The lobby ambassador user can enter any email id of his preference at the time of creating a guest user. |
Description |
Enter the description for this account. |
Disclaimer |
Enter the default disclaimer text. |
Defaults Editable |
Select the check box to allows the lobby ambassador to override all the configured defaults. This allows the lobby ambassador to modify these Guest User Account default settings while creating Guest Accounts from the Lobby Ambassador portal. If no default profile is selected on this tab, the defaults are not applied to the Lobby Ambassador. However, the Lobby Ambassador account is created and the Lobby Ambassador can create users with credentials as desired. |
Max User Creation Allowed |
Limits on the number of guest users that can be created by the Lobby Ambassador in a given time period. The time period is defined in hours, days, or weeks. |
Preview Current Logo |
Click the link to see what is currently being used as a logo, and then you can click to enable it or browse to another location to update the logo. |
Print Page Header Text |
Enter any additional page header text information. |
Dashboard > Job Dashboard > System Jobs > APIC-EM Integration
The following table describes the system defined jobs available under APIC-EM Integration.
Name of the Job |
Job Description |
---|---|
PnP Status Polling |
Gets plug and play device status from APIC-EM. |
APIC-EM Site Sync |
Synchronizes sites and devices from APIC-EM. |
APICSERVERSTATUS_PERODIC |
Monitors the status of connection between Prime Infrastructure and APIC-EM server. |
Dashboard > Job Dashboard > System Jobs > Assurance and Health Summary
The following table describes the system defined jobs available under Assurance and Health Summary.
Name of the Job |
Job Description |
---|---|
DAHealth_SITE |
Synchronize site rules from SAM to DA. |
PushCollectionPlanToDA |
Pushes the collection plan to DA. |
Assurance Lync Aggregation |
Computes the Lync call statistics. |
Assurance DataSource Update |
Synchronizes and updates the list of datasources between SAM and DA. |
WUserSyncJob_USER |
Fetches the list of associated clients to update the netflow user cache. |
HEALTH_SUMMARY_5MIN |
Computes Health scores for applications. |
AGGREGATION_HEALTH_SUMMARY |
Aggregates the health scores of device metrics for Routers, Switches and Access Points. |
BASELINE_HOURLY |
Computes the hourly baseline data points for application data. |
Assurance License Update |
Fetches the devices and AP to which the netflow is associated, for every 12 hours and stores the data in the Device_License_Table. |
BASELINE_DAILY |
Aggregates the hourly baseline values into daily values for the application data. |
Dashboard > Job Dashboard > System Jobs > Infrastructure
The following table describes the system defined jobs available under Infrastructure.
Field |
Description |
---|---|
Mobility Service Status |
Allows you to schedule mobility services status polling, and collects status for a defined interval. |
Data Cleanup |
Prunes entries in database based on retention settings, to control the disk usage and better performance of application. |
Mobility Service Synchronization |
Synchronizes the mobility services for the given interval of time. |
wIPS Alarm Sync |
Performs wIPS alarm synchronization for defined interval. |
OnDemandReportsCleanUp |
Cleans up the stale Report entries, periodically. |
Prime Infrastructure Server Backup |
Backs up Prime Infrastructure Application. |
SmartLicense-ComplianceStatus |
Checks the Smart License details. |
Guest Accounts Sync |
Syncs guest accounts. |
Index Search Entities |
Triggers Index searching, on demand. |
Controller Configuration Backup |
Collects controller configuration backups. |
Mobility Service Backup |
Automatically backs up mobility services for the specified time and day. |
Bulk Recompute RF Prediction |
Helps calculate heat map calculations. |
Dashboard > Job Dashboard > System Jobs > Inventory and Discovery Jobs
The following table describes the system defined jobs available under Inventory and Discovery Jobs.
Field |
Description |
---|---|
Switch Inventory |
Collects inventory for NAM devices (using HTTP), switches and routers (using CLI and SNMP). |
Wireless Controller Inventory |
Collects inventory for Wireless devices (using CLI and SNMP). |
Autonomous AP Inventory |
Collects inventory for Autonomous Access Points (using CLI and SNMP). |
Dashboard > Job Dashboard > System Jobs > Status
The following table describes the system defined jobs available under Status.
Field |
Description |
---|---|
OSS Server Status |
Checks for reachability of the Northbound Notification server using ICMP protocol. |
Switch Operational Status |
Detects whether the switch reachability is up or down. |
Appliance Status |
Detects Appliance status to collect RAID, temperature, Power Supply. |
Controller Operational Status |
Detects controller up/down status (using ping and SNMP) and port status (using SNMP or CLI). |
Lightweight AP Operational Status |
Discovers new APs and updates the existing AP information if there is any change. |
Autonomous AP Operational Status |
Updates the existing AP information if there is any change. |
Lightweight Client Status |
Discover new LWAP based wireless clients and updates existing clients information. |
Wireless AP Discovery |
Discovers new Access Points based on the trap notifications. |
Unmanaged APs |
Interacts with controller and identifies the list of unmanaged APs. |
Mobility Service Performance |
Collects information about the performance of mobility service engines for every 15 minutes by default. |
Identity Services Engine Status |
Verifies the reachability of ISE, if an ISE was added to Prime Infrastructure. |
Mobility Status Task |
Performs status poll of mobility service engines for given period of time. |
Interferers |
Gathers interferer statistics. |
Wired Client Status |
Discover new Wired clients using SNMP and updates existing details collected using switch and router inventory. |
Autonomous Client Status |
Discover new autonomous AP clients using SNMP and updates the existing details. |
Switch NMSP and Location Status |
Collects Network Mobility Services Protocol (NMSP) status and location details of all the devices and updates the corresponding status in Prime infrastructure. |
License Status |
Verifies the license status and identifies any overflow. |
Third Party Controller Operational Status |
Checks third party controller reachability (using ping and SNMP) and port status (using either SNMP or CLI based on device type). |
Third Party Access Point Operational Status |
Checks the status of third party Access points. |
Wireless Configuration Audit |
Collects inventory for Wireless devices using SNMP and compares the same with the one existing in the Prime Infrastructure database. |
Lightweight AP Ethernet Interface Status |
Polls the Unified AP Ethernet interface status and determines if it is up or down. |
Learn Unified AP Ping Capability |
Default state is Suspended and runs on demand. When it triggers, runs against all the associated unified APs in Prime Infrastructure to determine Aps ping capability. |
Device Data Collector |
Collects output from device using SSH/Telnet, on demand. |
Redundancy Status |
Collects redundancy information. |
Catalyst 9800 Telemetry Coral Health |
Checks the coral connectivity between Prime Infrastructure and Catalyst 9800 series devices. |
Dashboard > Job Dashboard > System Jobs > Wireless Monitoring
The following table describes the system defined jobs available under Wireless Monitoring.
Field |
Description |
---|---|
Radio Performance |
Collects Radio Performance statistics such as Rx utilization, Tx Utilization, Radio Profile states, 802.11 status (for example transmit/receive fragment count, radio RSSI level, SNR level, channel noise and channel utilization). |
Media Stream Clients |
Retrieves media related client properties such as client radio type, client's media stream name, history of failure reason for that media client. |
MapInfoPollingJob |
Polls Access Points and their radios for the service domain currently opened in Floor (or Outdoor Area) view, updates the entries in database. |
AP Ethernet Statistics |
Collects AP Ethernet Statistics such as AP Ethernet interface name, Rx/Tx unicast and non unicast packet count, link speed, Tx/Rx bytes. |
Traffic Stream Metrics |
Collects traffic stream (Uplink/Downlink) metrics at its 802.11 interface of AP for the associated mobile-stations. |
Mesh Link Status |
Collects the status Mesh Neighbors. |
Mesh link Performance |
Collects Mesh link Performance statistics. |
Autonomous AP CPU and Memory Utilization |
Collects the CPU and Memory Utilization of Autonomous AP. |
Client Statistics |
Collects Client related statistics such as traffic, packet drops, policy errors, RSSI and SNR for wired, wireless and autonomous AP. |
CleanAir Air Quality |
Polls the CleanAir Air Quality. |
Autonomous AP Radio Performance |
Collects Autonomous AP Radio performance statistics. |
Switch CPU and Memory Poll |
Collects CPU and Memory status of Cisco 5760 series wireless controller from the MIB. |
Wireless Controller Performance |
Collects system information such as CPU/Memory utilization, temperature, port details, and speed of the wireless controller. |
Autonomous AP Tx Power and Channel Utilization |
Collects Autonomous AP Tx Power and Channel Utilization statistics. |
Rogue AP |
Detects Rogue APs from the SNMP table |
Wireless QoS Statistics |
Collects Air Time Fairness Statistics through the MIBs. |
CCX Client Statistics |
Collects status for CCX Clients by querying MIB. |
AP Image Pre-Download Status |
Collects status of pre-download image for all APs. |
Radio Voice Performance |
Radio Performance Voice Statistics Collection |
Administration > Dashboards > Job Dashboard > User Jobs > Compliance Jobs
The following table displays the information about the audited/non-audited devices, rules that you selected for the compliance audit, compliance state, violation count, instance count, highest severity and ignore count.
Field |
Description |
---|---|
Audited/Non-Audited Devices |
This displays the number of audited and non-audited devices. For more details on devices, click the hyperlinked count of audited and non-audited devices. The device name and audit status are displayed when you click the hyperlinked count of audited devices. Non-audited devices include the count of the following.
|
Selected Rules |
Number of rules selected in a policy at the time the policy profile was created. This may be subset of the total number of rules defined for the policy. |
Compliance State |
Displays Pass or Fail. All rules in policy for all devices must confirm for the state to display Pass. |
Violation Count |
This lists the number of distinct violations (for a particular policy, for the number of devices) that were observed in each job. For example, if a particular policy is violated in 100 devices, the violation count is only 1. |
Instance Count |
Summation of the violation count for all the device. For example, if a particular policy is violated in 100 devices, the instance count is 100. |
Highest Severity |
The highest severity of the various rules comprising the policy. The highest (as decided at the time of creating rules) is shown. This overrides the lower severity items. |
Ignore Count |
This is the count of rules ignored due to devices falling outside the scope of platforms defined against the rule. |