|
|
November 2009 |
- Added this Revision History table.
- Updated the section “NTP-A326 Create a Server Trail” in the chapter, “Create Circuits and VT Tunnels”.
- Added a note in “Delete a PPM from the MRC-12, MRC-2.5G-4, or OC192-XFP Card” procedure in the chapter, “DLPs A500 to A599”.
- Updated the figure for fan tray assembly in Chapter 1, “Install the Shelf and Backplane Cable” and Chapter 15, “Maintain the Node”.
|
December 2009 |
- Updated the note in “Create Protection Groups” procedure in Chapter 4, Turn Up a Node.
- Updated the fan tray caution in the section “NTP-A7 Install the Fan-Tray Assembly” in the chapter “Install the Shelf and Backplane Cable”.
- Updated NTP-A316 in the chapter, Install Cards and Fiber-Optic Cable.
|
January 2010 |
- Updated the sections “DLP-A600 Perform BLSR Lockout” and “DLP-A601 Remove BLSR Lockout” in the chapter “DLPs A600 to A699”.
- Updated the section “NTP-A94 Upgrade OC-N Cards and Spans Automatically” in the chapter “Upgrade Cards and Spans”.
- Updated the “Add a Path Protection Node” procedure in Chapter 14, “Add and Remove Nodes”.
|
February 2010 |
- Added a note to NTP-A356 in the chapter, “Maintain the Node”.
|
May 2010 |
- Updated the link integrity soak duration range as 200 ms to 10000 ms in the section “DLP-A581 Configure Link Integrity Timer” in the chapter “DLPs A500 to A599”.
|
June 2010 |
- Updated “DLP-A578 Configuring Windows Vista to Support CTC” in the chapter, “Connect the PC and Log into the GUI”.
- Updated the section “NTP-A94 Upgrade OC-N Cards and Spans Automatically” in the chapter “Upgrade Cards and Spans”.
|
August 2010 |
- Updated the procedures “Roll the Source or Destination of One Optical Circuit”, “Roll One Cross-Connect from an Optical Circuit to a Second Optical Circuit”, “Roll Two Cross-Connects on One Optical Circuit Using Automatic Routing”, “Roll Two Cross-Connects on One Optical Circuit Using Manual Routing”, “Roll Two Cross-Connects from One Optical Circuit to a Second Optical Circuit” in the chapter “DLPs A400 to A499”.
- Removed the reference to G1000 card support in the chapters “DLPs A500 to A599” and “Maintain the Node”.
- Added a note to DS3XM-12 in the chapter, “Maintain the Node”.
|
September 2010 |
- Added a note to the table “OC-N Card Line Settings” in the chapter, DLPs A300 to A399.
|
October 2010 |
- Added a note in the chapters, “Maintain the Node”, “Install the Shelf and Backplane Cable”, and “DLPs A1 to A99”.
|
November 2010 |
- Added Step 11 and a note to Step 9 in the procedure, “DLP-A17 Connect Office Power to the ONS 15454 Shelf”.
- Updated Step 1 in the procedure “DLP-A18 Turn On and Verify Office Power”.
- Added a note to DLP-A509 in the chapter, DLPs A500 to A599.
- Updated Step 11 in the procedure “DLP-A448 Convert DS3XM-6 or DS3XM-12 Cards From 1:1 to 1:N Protection”.
|
December 2010 |
- Added a note to the “NTP-A94 Upgrade OC-N Cards and Spans Automatically” in the chapter, “Upgrade Cards and Spans”.
- Updated the section “NTP-A306 Off-Load the Diagnostics File” in the chapter, “Maintain the Node”.
|
January 2011 |
- Updated the table “OC-N Card Line Settings” in the chapter, “DLPs A300 to A399”.
- Updated the procedure “A370 Upgrade OC-N Cards to Multirate Cards” in the chapter, “Upgrade Cards and Spans”.
|
March 2011 |
- Added a note in the chapter, “Upgrade Cards and Spans”.
|
September 2011 |
- Updated the “Test DS1/E1-56 and DS3XM-12 Electrical Card Ports” in the chapter, “Maintain the Node”.
|
October 2011 |
Updated the section “DLP-A456 Configure the Node for RADIUS Authentication” in the chapter “DLPs A400 to A499”. |
December 2011 |
Updated the procedure, “NTP-A94 Upgrade OC-N Cards and Spans Automatically” in the chapter, “Upgrade Cards and Spans”. |
May 2012 |
- Added a note to “NTP-A94 Upgrade OC-N Cards and Spans Automatically” procedure in the chapter, “Upgrade Cards and Spans”.
- Added a new procedure “NTP-A370 Upgrade OC-N Cards Manually” to the chapter, “Upgrade Cards and Spans”.
|
August 2012 |
- The full length book-PDF was generated.
|
November 2012 |
- Added a note to “NTP-A194 Create Overhead Circuits” procedure in the chapter “Create Circuits and VT Tunnels”.
- Added a note to “DLP-A377 Provision Section DCC Terminations” and “DLP-A378 Provision Line DCC Terminations” procedures in the chapter “DLPs A300 to A399”.
- Updated Table 12-1 in the procedure, “NTP-A370 Upgrade OC-N Cards Manually” in the chapter, “Upgrade Cards and Spans”.
- Updated the “NTP-A107 Inspect and Replace the Air Filter” procedure in the chapter “Maintain the Node”.
|
January 2013 |
- Updated the procedure, “NTP-A94 Upgrade OC-N Cards and Spans Automatically” in the chapter, “Upgrade Cards and Spans”.
|
May 2013 |
Added the procedure, "NTP-A375 Set Up Secure Access to the ONS 15454 TL1" to the chapter, "Turn Up a Node". |
June 2013 |
Added the procedure, “A376 Upgrading a BLSR Ring Using an MRC-12 Card” to the chapter, “Convert Network Configurations”. |