View Inventory

This chapter describs the tasks to view the inventory details of a single or multiple racks.

View Inventory of All Racks and Chassis

You can view inventory of all the racks and chassis used on the network from the Inventory tab. To view the inventory of all the racks and chassis, perform these steps:

Before you begin

Log into Cisco Optical Site Manager

Procedure

Step 1

Click Inventory in the left panel.

The Inventory page appears and displays the following details:

  • Location—Displays the location where the equipment is installed.

  • UID—Displays the unique identifier of each component.

  • Display Name—Displays the display name of each component.

  • Equipment Type—Displays the type of equipment.

  • Connected To—Displays the passive unit associated with the USB port of the chassis.

  • Actual Type—Displays the specific card name.

  • Serial No—Displays the equipment serial number.

  • Product ID—Displays the manufacturing product identifier.

  • HW Part No—Displays the hardware part number.

  • CLEI Code—Displays the Common Language Equipment Identifier (CLEI) code.

  • Version ID—Displays the manufacturing version identifier.

  • HW Rev—Displays the hardware revision number.

  • Boot ROM Rev—Displays the boot read-only memory (ROM) revision number.

  • Manufacturing Date—Displays the manufacturing date of the component.

Step 2

(Optional) Click the Export to Excel icon to export and download the inventory information to an Excel file.

View Inventory of Single Rack and Chassis

To view the inventory details of a single rack or chassis, such as location, display name, and equipment type, perform these steps:

Before you begin

Log into Cisco Optical Site Manager

Procedure

Step 1

Click COSM Topology in the left panel.

The COSM Topology page appears.

Step 2

Click the rack name from the Rack view.

Step 3

Right-click the chassis from the Rack view and select Open

The Inventory page appears and displays the following details:

  • Location—Displays the location where the equipment is installed.

  • UID—Displays the unique identifier of each component.

  • Display Name—Displays the display name of each component.

  • Eqpt Type—Displays the type of equipment.

  • Connected To—Displays the passive unit associated with the USB port of the chassis.

  • Actual Eqpt Type—Displays the specific card name.

  • Serial No—Displays the equipment serial number.

  • Product ID—Displays the manufacturing product identifier.

  • HW Part No—Displays the hardware part number.

  • CLEI Code—Displays the Common Language Equipment Identifier (CLEI) code.

  • Version ID—Displays the manufacturing version identifier.

  • HW Rev—Displays the hardware revision number.

  • Boot ROM Rev—Displays the boot read-only memory (ROM) revision number.

  • Manufacturing Date—Displays the manufacturing date of the selected rack or chassis.

Step 4

(Optional) Click the Export to Excel icon to export and download the inventory information to an Excel file.