The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides a list of interface and card types supported in Cisco MetroPlanner, as well as the corresponding Cisco product ID (Tables B-1 to B-29).
Note The card names in this appendix designated with "_C" or "_L" appear in Cisco MetroPlanner with a "_y" designation before network analysis. The "_y" designation indicates that Cisco MetroPlanner will use either a C- or L-band card, depending on the band selected during project creation.
|
|
|
|
Transponder |
TXP_MR_2.5G 2R |
Client 1+1 |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |
|
|
|
|
Transponder |
TXP_MR_2.5G 2R |
Client 1+1 |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |
|
|
|
|
Transponder |
TXP_MR_2.5G 2R |
Client 1+1 |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |
|
|
|
|
Transponder |
TXP_MR_2.5G TXPP_MR_2.5G 2R |
Client 1+1 Y-Cable Fiber-Switched |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |
|
|
|
|
Transponder |
TXP_MR_2.5G TXPP_MR_2.5G 2R |
Client 1+1 Y-Cable Fiber-Switched |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |