Shipping and Receiving
The chassis is shipped in one of the following ways:
-
Chassis with filler cards and line cards— you receive the chassis with preinstalled line cards (based on the number of line cards you have ordered) and the rest of the line card slots have filler cards. If you have preordered four line cards, then, the chassis does not contain any filler cards. There are four fiber management brackets in the package, for each of the line card or filler cards preinstalled in the chassis. The controller and the three fan units are also preinstalled. The other items available in the same package (with the chassis) are: -
Accessory kit, that has all the installation hardware.
-
Two PSUs - AC or DC. Installation of PSUs is discussed in the Installation of Modules chapter.
AC chassis - while ordering for an AC chassis, select the power cable. Based on your choice (NEMA or CEE), you get a pair of 90 degree and straight cables for each PSU. All the AC cables are 4.25 m long.
Table 1. Power cables for the chassis Type of Cable
P1 Connector
P2 Connector
CPN
Straight cable
NEMA L6-20P
IEC 60320 – C21
72-101432-01
CEE 7/7 (Europe)
IEC 60320 – C21
72-101434-01
90-degree cable
CEE 7/7 (Europe)
IEC 60320 – C21
72-101425-01
NEMA L6-20P
IEC 60320 – C21
37-1138-01
Note
The 90deg cable is used only for ETSI racks to maintain a footprint of 600 mm.
DC chassis - when you order for a DC chassis, you get four power lugs for each PSU (a pair of 90-degree and a pair of 180-degree lugs). 180-degree lugs are used for ETSI racks to maintain a footprint of 600 mm.
-
-
Chassis with only filler cards— you receive the chassis with four filler cards in the line card slots. There are four fiber management brackets in the package, for each of the filler cards. Each line card ordered as a spare item is shipped separately and the extra fiber management bracket (for the line card) is available in the line card package. Only the accessory kit is available with the chassis (in the same package). You must order all the other modules (fan units, controller, PSUs) separately.
For installation procedures of the modules, see Installation of Modules chapter.