IOT Interface Modules Configuration Guide, Cisco IOS XE 17 (Cisco ASR 900 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 16, 2022

Chapter: Feature History

Feature History

Feature History

The following table lists the new and modified features supported in the IOT Serial Controller Configuration Guide in Cisco IOS XE 17 releases.


Feature	Description
Cisco IOS XE Cupertino 17.9.1
Hitless Switching on C37.94 Interface Module	Hitless switching protection describes the ability to switch between the active and backup paths without losing packets when an active path fails. This feature ensures uninterrupted continuous service and maintains an extremely high-reliability rating.
Cisco IOS XE Bengaluru 17.4.1
Support for A900-IMA6EM and A900-IMA4C3794 on A900-RSP3C-400-S and Cisco A900-RSP3C-200	This feature supports A900-IMA6EM and A900-IMA4C3794 interface modules on the Cisco A900-RSP3C-400, and on slot 4 on Cisco A900-RSP3C-200.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)