Cisco 1120 Connected Grid Router Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 29, 2012

Unpacking the Router

This section includes instructions about how to unpack the Cisco 1120 Connected Grid Router and describes the items that ship with the router.

These topics are discussed:

■Unpacking the Router

■Router Package Contents

Unpacking the Router

Note: When you unpack the router, do not remove the foam blocks attached to antennas and antenna connectors. The foam protects the antennas and connectors during installation.

Follow these steps to unpack the router:

1. Open the shipping container and carefully remove the contents.

2. Return all packing material to the shipping container, and save it.

3. Ensure that all items listed in the Router Package Contents are included in the shipment. If any item is damaged or missing, notify your authorized Cisco sales representative.

Router Package Contents

Your router kit contains the items listed in Table 1.

Table 1 Router Package Contents
Qty.	Item	Description
1	Cisco 1120 Connected Grid Router	Router enclosure with the following components installed: ■Connected Grid Modules (1 to 2, depending on configuration ordered) with required antennas ■2-GB SD Flash Memory Module ■AC power supply (integrated)
1	DIN Rail Mounting Kit	Includes: ■DIN rail mounting bracket ■All required hardware to attach bracket to router
2	Power connectors adapters	Use these mating connectors for wiring the router power connectors
1	User Documentation Kit	Includes: ■Read Me First card ■Regulatory Compliance and Safety Information document

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)