Cisco SD-WAN Manager Data Storage

Information About Cisco SD-WAN Manager Data Storage

Cisco SD-WAN Manager stores broad range of information including device configuration information, alarms, audit logs, various metrics, firewall rules and so on, in a database.

Configure Cisco SD-WAN Manager Data Storage

  1. From the Cisco SD-WAN Manager menu, choose Administration > Settings.

  2. Click Statistics Database Configuration section, to view the maximum space available for the database.

  3. For each field in the Statistics Type column, assign the amount of storage to be allocated, in gigabytes (GB). The total value of all the fields cannot exceed the maximum available space.

    Table

    Description

    Approute

    Index Name: approutestatsstatistics

    SDWAN Tunnel SLA, which is used to Calculate Tunnel SLA

    - Aggregated SAIE

    Index Name: aggregatedappsdpistatistics

    Aggregated application data for certain edges and interfaces. this is used to calculate application usage for certain site/device

    Audit Log

    Audit Log

    vnf statistics

    Service Chain Health Statistics data for Clouddock

    Firewall

    Firewall rule and counters

    IPS Alert

    Intrusion Prevention System, which is used to Monitors network traffic and analyzes against a defined rule set.

    CloudExpress

    Cloud onRamp

    AppHosting

    Alarm

    Alarms

    Performance Monitor

    Application Performance, this is used to measure performance of each application and site.

    NWPI

    Network wide path insight trace, flow, packet, aggregation and task data

    umts-monitoring

    Underlay network performance measurement

    URLF

    URL filtering allows you to control access to Internet websites by permitting or denying access to specific websites based on information contained in an URL list

    Bridge Interface

    Cisco vEdge devices bridge interface rx/tx statistics

    Device Events

    Events received from devices

    EIO

    EIO module 3G/4G/5G statistics

    Device Configuration

    Device Running Configuration

    Interface

    Device Interface Table

    Wlan Client Info

    UtdDaqIox

    Speed Test

    Speed Test Record

    BridgeMac

    Cisco vEdge device per interface/mac address rx/tx statistics

    Device System Status

    Device System Status including CPU, memory, disk etc

    umts-event-tunnel-sla-change

    underlay performance measurement triggered by tunnel SLA changes.

    QoS

    statistics/counters of each interface queues.

    Tracker Statistics

    Endpoint Tracker SLA metrics

    Sleofflinereport

    Flow Log

    Flowlog feature(should be applicable for Cisco vEdge devices only)

    DeviceHealth

    Device Health Table

    Umbrella

    Umbrella Integration feature enables cloud-based security service by inspecting the Domain Name System (DNS) query that is sent to the DNS server through the device.

    Network-wide Packet Insight (raw)

    NWPI raw data storage

    umts-event-tunnel-pmtu-change

    Underlay performance measurement triggered by tunnel path MTU changes.

    Security Unified Logging

    This feature supports Unified Logging which is used to capture information about connection events across different security features at different stages during policy enablement and execution.

    With Unified Logging, you can have visibility to the log data for Zone-based Firewall and for Unified Threat Defense features such as IPS,

    URL-F and AMP to understand what traffic, threats, sites or malware were blocked, and the rules that blocked the traffic or sessions with the associated port, protocol or applications.

    Additionally, this feature also provides support for On-Demand Troubleshooting. On-Demand troubleshooting allows a user to view the connection events of different flows of traffic from a device within a configured period of time.

    SiteHealth

    Site Health Table

    Artstatistics

    UMTS Rest Event

    Underlay performance measurement triggered by other events except tunnel SLA change and Path MTU changes.

    SAIE

    Raw DPI record, per IP flow tx/rx counters.

    Aggregated Tunnel SLA

    approutestatsstatistics_routing_summary

    Aggregated 24 hours SLA for each tunnel

    Aggregated Tunnel SLA

    approutestatsstatistics_transport_summary

    Aggregated 24 hours SLA for each color combination

  4. Click Save.

    Cisco SD-WAN Manager updates the storage allocations that you have assigned once a day, at midnight.

View Cisco SD-WAN Manager Data Storage

From the Cisco SD-WAN Manager menu, choose Administration > Settings > Statistics Database Configuration.

This shows the space available for the database and the total amount of space currently being used by each data type.

For information about disk size recommendations and requirements, see the server recommendations for your release in Cisco Catalyst SD-WAN Controller Compatibility Matrix and Server Recommendations.