Schema - Discovery and Network Map Tables

application_host_map
- application_host_map Fields
- application_host_map Joins
- application_host_map Sample Query
application_info
- application_info Fields
- application_info Joins
- application_info Sample Query
application_tag_map
- application_tag_map Fields
- application_tag_map Joins
- application_tag_map Sample Query
domain_control_information
- domain_control_information Fields
- domain_control_information Joins
- domain_control_information Sample Query
network_discovery_event
- network_discovery_event Fields
- network_discovery_event Joins
- network_discovery_event Sample Query
rna_host
- rna_host Fields
- rna_host Joins
- rna_host Sample Query
rna_host_attribute
- rna_host_attribute Fields
- rna_host_attribute Joins
- rna_host_attribute Sample Query
rna_host_client_app
- rna_host_client_app Fields
- rna_host_client_app Joins
- rna_host_client_app Sample Query
rna_host_client_app_payload
- rna_host_client_app_payload Fields
- rna_host_client_app_payload Joins
- rna_host_client_app_payload Sample Query
rna_host_ioc_state
- rna_host_ioc_state Fields
- rna_host_ioc_state Joins
- rna_host_ioc_state Sample Query
rna_host_ip_map
- rna_host_ip_map Fields
- rna_host_ip_map Joins
- rna_host_ip_map Sample Query
rna_host_mac_map
- rna_host_mac_map Fields
- rna_host_mac_map Joins
- rna_host_mac_map Sample Query
rna_host_os
- rna_host_os Fields
- rna_host_os Joins
- rna_host_os Sample Query
rna_host_os_vulns
- rna_host_os_vulns Fields
- rna_host_os_vulns Joins
- rna_host_os_vulns Sample Query
rna_host_protocol
- rna_host_protocol Fields
- rna_host_protocol Joins
- rna_host_protocol Sample Query
rna_host_sensor
- rna_host_sensor Fields
- rna_host_sensor Joins
- rna_host_sensor Sample Query
rna_host_service
- rna_host_service Fields
- rna_host_service Joins
- rna_host_service Sample Query
rna_host_service_banner
- rna_host_service_banner Fields
- rna_host_service_banner Joins
- rna_host_service_banner Sample Query
rna_host_service_info
- rna_host_service_info Fields
- rna_host_service_info Joins
- rna_host_service_info Sample Query
rna_host_service_payload
- rna_host_service_payload Fields
- rna_host_service_payload Joins
- rna_host_service_payload Sample Query
rna_host_service_subtype
- rna_host_service_subtype Fields
- rna_host_service_subtype Joins
- rna_host_service_subtype Sample Query
rna_host_service_vulns
- rna_host_service_vulns Fields
- rna_host_service_vulns Joins
- rna_host_service_vulns Sample Query
rna_host_third_party_vuln
- rna_host_third_party_vuln Fields
- rna_host_third_party_vuln Joins
- rna_host_third_party_vuln Sample Query
rna_host_third_party_vuln_bugtraq_id
- rna_host_third_party_vuln_bugtraq_id Fields
- rna_host_third_party_vuln_bugtraq_id Joins
- rna_host_third_party_vuln_bugtraq_id Sample Query
rna_host_third_party_vuln_cve_id
- rna_host_third_party_vuln_cve_id Fields
- rna_host_third_party_vuln_cve_id Joins
- rna_host_third_party_vuln_cve_id Sample Query
rna_host_third_party_vuln_rna_id
- rna_host_third_party_vuln_rna_id Fields
- rna_host_third_party_vuln_rna_id Joins
- rna_host_third_party_vuln_rna_id Sample Query
rna_vuln
- rna_vuln Fields
- rna_vuln Joins
- rna_vuln Sample Query
tag_info
- tag_info Fields
- tag_info Joins
- tag_info Sample Query
url_categories
- url_categories Fields
- url_categories Joins
- url_categories Sample Query
url_reputations
- url_reputations Fields
- url_reputations Joins
- url_reputations Sample Query
user_ipaddr_history
- user_ipaddr_history Fields
- user_ipaddr_history Joins
- user_ipaddr_history Sample Query

Schema: Discovery Event and Network Map Tables

This chapter contains information on the schema and supported joins for tables related to discovery events and the Cisco network map.

Your Secure Firewall generates discovery events continuously as it monitors the traffic produced by your hosts and network devices.

The network map is a repository of information about the network assets reported in discovery events. For each detected host and network device, the network map contains information such as operating system, servers, client applications, host attributes, vulnerabilities, and so on.

Vulnerabilities are descriptions of specific compromises or exploits to which hosts may be susceptible. Cisco maintains its own vulnerability database (VDB), which cross-references the Bugtraq database and MITRE’s CVE database. You can also import third-party vulnerability data using the host input feature.

Note that the information about a given host in the network map can vary according to the type of host and the information available in the monitored traffic.

For more information, see the sections listed in the following table. The Version column indicates the Secure Firewall versions that support each table. While support for deprecated tables continues in the current product release, Cisco strongly recommends avoiding the use of deprecated tables and fields, to ensure continued support in the future.

Table 6-1 Schema for Discovery Event and Network Map Tables
See...	For the table that stores information on...	Version
application_host_map	Applications detected on the hosts in your monitored network.	5.0+
`application_ip_map`	The category, tags, productivity, and risk associated with an application detected in your monitored network.	5.2+
`application_ip_map`	The category, tags, productivity, and risk associated with an application detected in your monitored network. Deprecated in Version 5.2. Superseded by `application_ip_map .`	5.0-5.1.x
application_tag_map	The tags associated with an application detected in your monitored network.	5.0+
domain_control_information	Domain hierarchy information	6.0+
network_discovery_event	Discovery and host input events.	5.0+
rna_host	Basic information on the hosts in your monitored network.	5.2+
rna_host_attribute	The host attributes associated with each host in your monitored network.	5.2+
rna_host_client_app	The client applications detected on the hosts in your monitored network.	5.2+
rna_host_client_app	The payloads associated with HTTP (web browser) client applications detected on the hosts in your monitored network.	5.2+
rna_host_ioc_state	Stores compromise state for hosts.	5.3+
rna_host_ip_map	Correlates host IDs to MAC addresses for hosts in your monitored network.	5.2+
rna_host_os	The operating systems detected on the hosts in your monitored network.	5.2+
rna_host_os_vulns	The vulnerabilities associated with the hosts in your monitored network.	5.2+
rna_host_protocol	The protocols detected on the hosts in your monitored network.	4.10.x+
rna_host_protocol	The hosts in your monitored network with regard to the managed device that detected them.	5.2+
rna_host_service	The services detected on the hosts in your monitored network.	5.2+
rna_host_service_banner	Headers from network traffic that advertise service vendors and versions (“banners”) for the services detected on hosts in your monitored network.	5.2+
rna_host_service_info	Details of the services detected on the hosts in your monitored network.	5.2+
rna_host_service_payload	The payloads associated with services detected on the hosts in your monitored network.	5.2+
rna_host_service_subtype	The sub-services for the services detected on the hosts in your monitored network.	5.2+
rna_host_service_vulns	The vulnerabilities associated with the services detected on the hosts in your monitored network.	5.2+
rna_host_third_party_vuln	The third-party vulnerabilities associated with the hosts in your monitored network.	5.2+
rna_host_third_party_vuln_bugtraq_id	The third-party vulnerabilities associated with the hosts in your monitored network that are also associated with a vulnerability in the Bugtraq database ( `http://www.securityfocus.com/bid/`).	5.2+
rna_host_third_party_vuln_cve_id	The third-party vulnerabilities associated with the hosts in your monitored network that are also associated with a vulnerability in MITRE’s CVE database. ( `http://www.cve.mitre.org/`).	5.2+
rna_host_third_party_vuln_rna_id	The third-party vulnerabilities associated with the hosts in your monitored network that are also associated with a vulnerability in the VDB.	5.2+
`rna_ip_host`	Basic information on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host`.	4.10.x-5.1.x
`rna_ip_host_client_app`	The client applications detected on the hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_client_app`.	4.10.x-5.1.x
`rna_ip_host_client_app_payload`	The payloads associated with HTTP (web browser) client applications detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_client_app`.	4.10.x-5.1.x
`rna_ip_host_os`	The operating systems detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_os`.	4.10.x-5.1.x
`rna_ip_host_os_vulns`	The vulnerabilities associated with the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_os_vulns`.	4.10.x--5.1.x
`rna_ip_host_sensor`	The IP hosts in your monitored network with regard to the managed device that detected them. deprecated in Version 5.2. Superseded by `rna_host_protocol`.	5.0-5.1.x
`rna_ip_host_service`	The services detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_service`.	4.10.x-5.1.x
`rna_ip_host_service_banner`	Headers from network traffic that advertise service vendors and versions (“banners”) for the services detected on hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_service_banner`.	4.10.x-5.1.x
`rna_ip_host_service_info`	Details of the services detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_service_info`.	4.10.x-5.1.x
`rna_ip_host_service_payload`	The payloads associated with services detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_service_payload`.	4.10.x-5.1.x
`rna_ip_host_service_subtype`	The sub-services for the services detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_service_subtype`.	4.10.x-5.1.x
`rna_ip_host_service_vulns`	The vulnerabilities associated with the services detected on the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_service_vulns`.	4.10.x-5.1.x
`rna_ip_host_third_party_vuln`	The third-party vulnerabilities associated with the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_third_party_vuln`.	4.10.x-5.1.x
`rna_ip_host_third_party_vuln_bugtraq_id`	The third-party vulnerabilities associated with the IP hosts in your monitored network that are also associated with a vulnerability in the Bugtraq database ( `http://www.securityfocus.com/bid/`). deprecated in Version 5.2. Superseded by `rna_host_third_party_vuln_bugtraq_id`.	4.10.x-5.1.x
`rna_ip_host_third_party_vuln_cve_id`	The third-party vulnerabilities associated with the IP hosts in your monitored network that are also associated with a vulnerability in MITRE’s CVE database. ( `http://www.cve.mitre.org/`). deprecated in Version 5.2. Superseded by `rna_host_third_party_vuln_cve_id`.	4.10.x-5.1.x
`rna_ip_host_third_party_vuln_rna_id`	The third-party vulnerabilities associated with the IP hosts in your monitored network that are also associated with a vulnerability in the VDB. deprecated in Version 5.2. Superseded by `rna_host_third_party_vuln_rna_id`.	4.10.x-5.1.x
`rna_ip_host_user_history`	User activity for a particular IP host in your monitored network. deprecated in Version 5.2. Superseded by `user_ipaddr_history`.	4.10.x-5.1.x
`rna_mac_host`	The MAC hosts (hosts without an IP address) in your monitored network.	4.10.x-5.1.x
`rna_mac_host_sensor`	The IP hosts in your monitored network with regard to the managed devices that detected them.	5.0-5.1.x
`rna_mac_ip_map`	The MAC addresses of the IP hosts in your monitored network. deprecated in Version 5.2. Superseded by `rna_host_ip_map` and `rna_host_mac_map.`	4.10.x-5.1.x
rna_vuln	The vulnerabilities in the Cisco VDB.	4.10.x+
tag_info	The tags that characterize detected applications.	5.0+
url_categories	The categories that characterize URLs accessed from hosts in your monitored network.	5.0+
url_reputations	The reputations that characterize URLs accessed from hosts in your monitored network.	5.0+
user_ipaddr_history	User activity for a particular host in your monitored network.	5.2+

application_host_map

The application_host_map table contains information on the categories and tags associated with each application detected on your network.

For more information, see the following sections:

application_host_map Fields

The following table describes the fields you can access in the application_host_map table.

Table 6-2 application_host_map Fields
Field	Description
`application_id`	The internal identification number for the application.
`application_name`	The application name that appears in the user interface.
`application_tag_id`	This field has been deprecated and will now return `null`.
`business_relevance`	The index (from `1` to `5`) of the application’s relevance to business productivity, where `1` is very low and `5` is very high.
`business_relevance_description`	The description of the business relevance ( `very low`, `low`, `medium`, `high`, `very high`).
`host_id`	ID number of the host.
`risk`	An index (from `1` to `5`) of the application’s risk, where `1` is very low risk and `5` is critical risk.
`risk_description`	The description of the risk ( `very low`, `low`, `medium`, `high`, `critical`).

application_host_map Joins

The following table describes the joins you can perform on the application_host_map table.

Table 6-3 application_host_map Joins
You can join this table on...	And...
`application_id`	`app_ids_stats_current_timeframe. application_id application_info. application_id application_tag_map. application_id app_stats_current_timeframe. application_id rna_host_service_info. application_protocol_id rna_host_client_app_payload. web_application_id rna_host_client_app_payload. client_application_id rna_host_client_app. client_application_id rna_host_client_app. application_protocol_id rna_host_service_payload. web_application_id`
host_id	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

application_host_map Sample Query

The following query returns information about the applications detected on the host with a host_id of 8.

SELECT host_id, application_id, application_name, business_relevance, risk

FROM application_host_map

WHERE HEX(host_id) = "00000000000000000000000000000008";

application_info

The application_info table contains information about the applications that can be detected on the hosts in your monitored network.

You can retrieve the list of tags associated with an application from the application_tag_map table by joining on application_id. Similarly, you can retrieve an application’s list of associated categories from the application_host_map by joining on application_id.

For more information, see the following sections:

application_info Fields

The following table describes the fields you can access in the application_info table.

Table 6-4 application_info Fields
Field	Description
`application_description`	A description of the application.
`application_id`	The internal identification number for the application.
`application_name`	The application name that appears in the user interface.
`business_relevance`	An index (from `1` to `5`) of the application’s relevance to business productivity, where `1` is very low and `5` is very high.
`business_relevance_description`	A description of business relevance ( `very low`, `low`, `medium`, `high`, `very high`).
`domain_name`	Name of the domain on which the application was detected.
`domain_uuid`	UUID of the domain on which the application was detected. This is presented in binary.
`is_client_application`	A true-false flag that indicates if the detected application is a client.
`is_server_application`	A true-false flag that indicates if the detected application is a server application.
`is_web_application`	A true-false flag that indicates if the detected application is a web application.
`risk`	An index (from `1` to `5`) of the application’s estimated risk where `1` is very low risk and `5` is critical risk.
`risk_description`	A description of the risk ( `very low`, `low`, `medium`, `high`, and `critical`).

application_info Joins

The following table describes the joins you can perform on the application_info table.

Table 6-5 application_info Joins
You can join this table on...	And...
`application_id`	`application_host_map. application_id app_ids_stats_current_timeframe. application_id application_tag_map. application_id app_stats_current_timeframe. application_id connection_summary. application_protocol_id rna_host_service_info. application_protocol_id rna_host_client_app_payload. web_application_id rna_host_client_app_payload. client_application_id rna_host_client_app. client_application_id rna_host_client_app. application_protocol_id rna_host_service_payload. web_application_id`

application_info Sample Query

The following query returns the record for the application with a host_id of 8 found within the Global \ Company B \ Edge domain.

SELECT application_id, application_name, application_description, business_relevance, risk

FROM application_info

WHERE application_id="8" AND domain_name= "Global \ Company B \ Edge";

application_tag_map

The application_tag_map table contains information on the tags associated with each application detected on your network.

For more information, see the following sections:

application_tag_map Fields

The following table describes the fields you can access in the application_tag_map table.

Table 6-6 application_tag_map Fields
Field	Description
`application_id`	The internal identification number for the application.
`application_name`	The application that appears in the user interface.
`domain_name`	Name of the domain on which the application was detected.
`domain_uuid`	UUID of the domain on which the application was detected. This is presented in binary.
`tag_id`	The internal identification number for the tag.
`tag_name`	The text of the tag that appears in the user interface.
`tag_type`	One of the following: `category` or `type`.

application_tag_map Joins

The following table describes the joins you can perform on the application_tag_map table.

Table 6-7 application_tag_map Joins
You can join this table on...	And...
`application_id`	`app_ids_stats_current_timeframe. application_id application_info. application_id application_host_map. application_id app_stats_current_timeframe. application_id connection_summary. application_protocol_id rna_host_service_info. application_protocol_id rna_host_client_app_payload. web_application_id rna_host_client_app_payload. client_application_id rna_host_client_app. client_application_id rna_host_client_app. application_protocol_id rna_host_service_payload. web_application_id`
`tag_id`	`tag_info. tag_id`

application_tag_map Sample Query

The following query returns all tag records associated with the specified application.

SELECT application_id, application_name, tag_id, tag_name

FROM application_tag_map

WHERE application_name="Active Directory";

domain_control_information

The domain_control_information table maps domains to their UUIDs and provides the name and UUID of each domain’s parent domain.

For more information, see the following sections:

domain_control_information Fields

The following table describes the fields you can access in the domain_control_information table.

Table 6-8 domain_control_information Fields
Field	Description
`domain_name`	Name of the domain
`domain_uuid`	UUID of the domain. This is presented in binary.
`parent_domain_name`	Name of the parent domain, if applicable.
`parent_domain_uuid`	UUID of the parent domain, if applicable. This is presented in binary.

domain_control_information Joins

You cannot perform joins on the domain_control_information table.

domain_control_information Sample Query

The following query returns all domain names, domain UUIDs in ASCII format, and their parent domains.

SELECT domain_name, uuid_btoa(domain_uuid), parent_domain_name

FROM domain_control_information;

network_discovery_event

The network_discovery_event table contains information on discovery and host input events. The Secure Firewall generates discovery events when it detects a change on your monitored network, whether by discovering new network features or by detecting changes in previously identified network assets. The Secure Firewall generates host input events when a user manually modifies the network map by adding, modifying, or deleting network assets.

The network_discovery_event table supersedes the deprecated rna_event table starting with Version 5.0 of the Secure Firewall.

For more information, see the following sections:

network_discovery_event Fields

The following table describes the fields you can access in the network_discovery_event table.

Table 6-9 network_discovery_event Fields
Field	Description
`confidence`	The Secure Firewall-assigned confidence rating (from `0` to `100`) for the identification of the service.
`description`	The description of the event.
`domain_name`	Name of the domain on which the event was detected.
`domain_uuid`	UUID of the domain on which the event was detected. This is presented in binary.
`event_id`	The internal identification number for the event.
`event_time_sec`	The UNIX timestamp of the date and time the event was generated.
`event_time_usec`	The microsecond increment of the event timestamp.
`event_type`	The event type. For example, `New Host` or `Identity Conflict`.
`ip_address`	This field has been deprecated and will now return `null`.
`ipaddr`	A binary representation of the IPv4 or IPv6 address for the host involved in the event.
`mac_address`	The MAC address of the host involved in the event.
`mac_vendor`	The NIC hardware vendor of the host involved in the event.
`port`	The port used by the network traffic that triggered the event.
`sensor_address`	The IP address of the managed device that generated the discovery event. Format is ipv4_address,ipv6_address.
`sensor_name`	The managed device that generated the discovery event.
`sensor_uuid`	A unique identifier for the managed device, or `0` if `sensor_name` is `null`.
`user_dept`	The department of the user who last logged into the host.
`user_email`	The email address of the user who last logged into the host.
`user_first_name`	The first name of the user who last logged into the host.
`user_id`	The internal identification number for the user who last logged into the host.
`user_last_name`	The last name of the user who last logged into the host.
`user_last_seen_sec`	The UNIX timestamp of the date and time the Secure Firewall last detected user activity for the user who last logged into the host.
`user_last_updated_sec`	The UNIX timestamp of the date and time the Secure Firewall last updated the user record for the user who last logged into the host.
`user_name`	The user name of the user who last logged into the host.
`user_phone`	The phone number of the user who last logged into the host.

network_discovery_event Joins

The following table describes the joins you can perform using the network_discovery_event table.

Table 6-10 network_discovery_event Joins
You can join this table on...	And...
`ipaddr`	`rna_host_ip_map. ipaddr user_ipaddr_history. ipaddr`

network_discovery_event Sample Query

The following query returns discovery event records that include the user, detecting device name, timestamp, host IP address, and so on within the specified times.

SELECT sensor_name, event_time_sec, event_time_usec, event_type, ipaddr, user_id,

hex(mac_address), mac_vendor, port, confidence FROM network_discovery_event

WHERE event_time_sec

BETWEEN UNIX_TIMESTAMP("2013-01-01 00:00:00") AND UNIX_TIMESTAMP("2013-01-01 23:59:59")

ORDER BY event_time_sec DESC, event_time_usec DESC;

rna_host

The rna_host table contains basic information on the hosts in your monitored network.

This table supersedes rna_ip_host as of Version 5.2.

For more information, see the following sections:

rna_host Fields

The following table describes the fields you can access in the rna_host table.

Table 6-11 `rna_host` Fields
Field	Description
`criticality`	The host criticality level: `None`, `Low`, `Medium`, or `High`.
`domain_name`	Name of the domain on which the host was detected.
`domain_uuid`	UUID of the domain on which the host was detected. This is presented in binary.
`hops`	The number of network hops from the host to the managed device that detected the host.
`host_id`	ID number of the host.
`host_name`	Name of the host.
`host_type`	The host type: `Host`, `Router`, `Bridge`, `NAT Device`, or `Load Balancer`.
`jailbroken`	A true-false flag indicating whether a mobile device operating system is jailbroken.
`last_seen_sec`	The UNIX timestamp of the date and time the system last detected host activity.
`mobile`	A true-false flag indicating whether the detected host is a mobile device.
`netbios_name`	The host NetBIOS name string.
`notes`	The contents of the Notes host attribute for the host.
`vlan_id`	The VLAN identification number, if applicable.
`vlan_priority`	The priority value included in the VLAN tag.
`vlan_type`	The type of encapsulated packet that contains the VLAN tag: `0` — Ethernet `1` — Token Ring

rna_host Joins

The following table describes the joins you can perform on the rna_host table.

Table 6-12 rna_host Joins
You can join this table on...	And...
`host_id`	application_host_map. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ip_map. host_id rna_host_ioc_state. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host Sample Query

The following query returns 25 rna_host records that include the host ID, VLAN ID, when the host was last seen, and the type of host, within the Global \ Company B \ Edge domain, ordered by the type of host.

SELECT host_id, vlan_id, last_seen_sec, host_type

FROM rna_host

WHERE domain_name= "Global \ Company B \ Edge"

ORDER BY host_type

LIMIT 0, 25;

rna_host_attribute

The rna_host_attribute table contains information on the host attributes associated with each host in your monitored network. It supersedes the deprecated rna_ip_host_attribute table.

For more information, see the following sections:

rna_host_attribute Fields

The following table describes the fields you can access in the rna_host_attribute table.

Table 6-13 rna_host_attribute Fields
Field	Description
`attribute_name`	The host attribute. For example, `Host Criticality` or `Default Allow List`.
`attribute_value`	The value of the host attribute.
`host_id`	ID number of the host.

rna_host_attribute Joins

The following table describes the joins you can perform on the rna_host_attribute table.

Table 6-14 rna_host_attribute Joins
You can join this table on...	And...
`host_id`	application_host_map. host_id rna_host. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_attribute Sample Query

The following query returns all host attributes and values associated with the selected host ID.

SELECT attribute_name, attribute_value

FROM rna_host_attribute

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_client_app

The rna_host_client_app table contains information on the client applications detected on the hosts in your monitored network. It supersedes the deprecated rna_ip_host_client_app table.

For more information, see the following sections:

rna_host_client_app Fields

The following table describes the fields you can access in the rna_host_client_app table.

Table 6-15 rna_host_client_app Fields
Field	Description
`application`	Field deprecated in Version 5.0. Returns `null` for all queries.
`application_protocol_id`	An internal identifier for the detected application protocol.
`application_protocol_name`	One of: the name of the application, if a positive identification can be made `pending` if the system requires more data blank if there is no application information in the connection
`application_type`	Field deprecated in Version 5.0. Returns `null` for all queries.
`client_application_id`	The internal identification number for the application, if the application is identifiable.
`client_application_name`	One of: the name of the application, if a positive identification can be made. a generic client name if the system detects a client application but cannot identify a specific one. blank if there is no client application information in the connection.
`hits`	The number of times the client application was detected.
`host_id`	ID number of the host.
`last_used_sec`	The UNIX timestamp of the date and time the system last detected application activity.
`version`	The version of the application detected on the host.

rna_host_client_app Joins

The following table describes the joins you can perform on the rna_host_client_app table.

Table 6-16 rna_host_client_app Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id
`host_id` and `application_protocol_id` and `client_application_id` and `version`	the set of: `rna_host_client_app_payload. host_id rna_host_client_app_payload. application_protocol_id rna_host_client_app_payload. client_application_id rna_host_client_app_payload. version`
`application_protocol_id` or `client_application_id`	`app_ids_stats_current_timeframe. application_id application_info. application_id application_host_map. application_id application_tag_map. application_id app_stats_current_timeframe. application_id connection_summary. application_protocol_id rna_host_service_info. application_protocol_id rna_host_client_app_payload. web_application_id rna_host_client_app_payload. client_application_id rna_host_service_info. application_protocol_id rna_host_service_payload. web_application_id`

rna_host_client_app Sample Query

The following query returns information about the client applications detected on the host with host_id of 8.

SELECT host_id, client_application_id, client_application_name, version, hits, application_protocol_id, application_protocol_name, last_used_sec

FROM rna_host_client_app

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_client_app_payload

The rna_host_client_app_payload table contains information on the payloads in HTTP traffic associated with web applications on hosts detected in your monitored network.

For more information, see the following sections:

rna_host_client_app_payload Fields

The following table describes the fields you can access in the rna_host_client_app_payload table.

Table 6-17 rna_host_client_app_payload Fields
Field	Description
`application`	Field deprecated in Version 5.0. Returns `null` for all queries.
`application_protocol_id`	An internal identifier for the detected application protocol, if available. For traffic that has characteristics of both client applications and web applications, the `client_application_id` and `web_application_id` fields have the same value.
`application_protocol_name`	One of: the name of the application, if a positive identification can be made `pending` if the system requires more data blank if there is no application information in the connection
`application_type`	Field deprecated in Version 5.0. Returns `null` for all queries.
`client_application_id`	The internal identification number for the client application.
`client_application_name`	One of: the name of the application, if a positive identification can be made. a generic client name if the system detects a client application but cannot identify a specific one. blank if there is no client application information in the connection.
`host_id`	ID number of the host.
`payload_name`	Field deprecated in Version 5.0. Returns `null` for all queries.
`payload_type`	Field deprecated in Version 5.0. Returns `null` for all queries.
`version`	The version of the web application detected on the host.
`web_application_id`	The internal identification number for the web application, if available. For traffic that has characteristics of both client applications and web applications, the `client_application_id` and `web_application_id` fields have the same value.
`web_application_name`	One of: the name of the application, if a positive identification can be made. `web browsing` if the system detects an application protocol of HTTP but cannot identify a specific web application. blank if the connection has no HTTP traffic.

rna_host_client_app_payload Joins

The following table describes the joins you can perform on the rna_host_client_app_payload table.

Table 6-18 rna_host_client_app_payload Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id
the set of: `host_id,` `application_protocol_id,` `client_application_id,` `version`	the set of: `rna_host_client_app. host_id rna_host_client_app. application_protocol_id rna_host_client_app. client_application_id rna_host_client_app. version`
`client_application_id` or `web_application_id`	`app_ids_stats_current_timeframe. application_id application_info. application_id application_host_map. application_id application_tag_map. application_id app_stats_current_timeframe. application_id connection_summary. application_protocol_id rna_host_service_info. application_protocol_id rna_host_client_app. client_application_id rna_host_client_app. application_protocol_id rna_host_service_payload. web_application_id`

rna_host_client_app_payload Sample Query

The following query returns information about the web applications detected on the host with host_id of 8.

SELECT host_id, web_application_id, web_application_name, version, client_application_id, client_application_name

FROM rna_host_client_app_payload

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_ioc_state

The rna_host_ioc_state table stores the IOC state for hosts in your monitored network.

For more information, see the following sections:

rna_host_ioc_state Fields

The following table describes the fields you can access in the rna_host_ioc_state table.

Table 6-19 rna_host_ioc_state Fields
Field	Description
`first_seen`	Unix timestamp when the compromise was first detected.
`first_seen_sensor_address`	The IP address of the managed device that first detected the compromise. Format is ipv4_address,ipv6_address.
`first_seen_sensor_name`	The managed device that first detected the compromise.
`host_id`	ID number of the host.
`ioc_category`	The category for the compromise. Possible values include: `CnC Connected` `Exploit Kit` `High Impact Attack` `Low Impact Attack` `Malware Detected` `Malware Executed` `Dropper Infection` `Java Compromise` `Word Compromise` `Adobe Reader Compromise` `Excel Compromise` `PowerPoint Compromise` `QuickTime Compromise`
`ioc_description`	Description of the compromise.
`ioc_event_type`	The event type for the compromise. Possible values include: `Adobe Reader launched shell` `Dropper Infection Detected by AMP for Endpoints` `Excel Compromise Detected by AMP for Endpoints` `Excel launched shell \|` `Impact 1 Intrusion Event — attempted-admin` `Impact 1 Intrusion Event — attempted-user` `Impact 1 Intrusion Event — successful-admin` `Impact 1 Intrusion Event — successful-user` `Impact 1 Intrusion Event — web-application-attack` `Impact 2 Intrusion Event — attempted-admin` `Impact 2 Intrusion Event — attempted-user` `Impact 2 Intrusion Event — successful-admin` `Impact 2 Intrusion Event — successful-user` `Impact 2 Intrusion Event — web-application-attack` `Intrusion Event — exploit-kit` `Intrusion Event — malware-backdoor` `Intrusion Event — malware-CnC` `Java Compromise Detected by AMP for Endpoints` `Java launched shell` `PDF Compromise Detected by AMP for Endpoints` `PowerPoint Compromise Detected by AMP for Endpoints` `PowerPoint launched shell` `QuickTime Compromise Detected by AMP for Endpoints` `QuickTime launched shell` `Security Intelligence Event — CnC` `Suspected Botnet Detected by AMP for Endpoints` `Threat Detected by AMP for Endpoints — Subtype is 'executed'` `Threat Detected by AMP for Endpoints — Subtype is not 'executed'` `Threat Detected in File Transfer — Action is not 'block'` `Word Compromise Detected by AMP for Endpoints` `Word launched shell`
`ioc_id`	Unique ID number for the compromise.
`is_disabled`	Whether this compromise has been disabled.
`last_seen`	Unix timestamp when this compromise was last detected.
`last_seen_sensor_address`	The IP address of the managed device that last detected the compromise. Format is ipv4_address,ipv6_address.
`last_seen_sensor_name`	The managed device that last detected the compromise.

rna_host_ioc_state Joins

The following table describes the joins you can perform on the rna_host_ioc_state table.

Table 6-20 rna_host_ioc_state Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_ioc_state Sample Query

The following query returns up to 25 hosts with their ioc within a specified timespan.

SELECT host_id, ioc_id

FROM rna_host_ioc_state

WHERE first_seen

BETWEEN UNIX_TIMESTAMP("2011-10-01 00:00:00")

AND UNIX_TIMESTAMP("2011-10-07 23:59:59")

ORDER BY ioc_id DESC

LIMIT 0, 25;

rna_host_ip_map

The rna_host_ip_map table correlates host IDs to IP addresses for hosts in your monitored network.

For more information, see the following sections:

rna_host_ip_map Fields

The following table describes the fields you can access in the rna_host_ip_map table.

Table 6-21 rna_host_ip_map Fields
Field	Description
`host_id`	ID number of the host.
`ipaddr`	A binary representation of the IP address of the host.

rna_host_ip_map Joins

The following table describes the joins you can perform on the rna_host_ip_map table.

Table 6-22 rna_host_ip_map Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id
`ipaddr`	`compliance_event.dst_ipaddr compliance_event.src_ipaddr connection_summary. responder_ipaddr network_discovery_event. ipaddr user_discovery_event. ipaddr user_ipaddr_history. ipaddr white_list_event.ipaddr`

rna_host_ip_map Sample Query

The following query returns MAC information for the selected host.

SELECT host_id

FROM rna_host_ip_map

WHERE HEX(ipaddr) = "00000000000000000000FFFF0A0A0A04";

rna_host_mac_map

The rna_host_mac_map table correlates host IDs to MAC addresses for hosts in your monitored network.

For more information, see the following sections:

rna_host_mac_map Fields

The following table describes the fields you can access in the rna_host_mac_map table.

Table 6-23 rna_host_mac_map Fields
Field	Description
`host_id`	ID number of the host.
`mac_address`	The host’s MAC address.
`mac_vendor`	Vendor of the network interface of the detected host.

rna_host_mac_map Joins

The following table describes the joins you can perform on the rna_host_mac_map table.

Table 6-24 rna_host_mac_map Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_mac_map Sample Query

The following query returns MAC information for the host with host_id of 8.

SELECT HEX(mac_address)

FROM rna_host_mac_map

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_os

The rna_host_os table contains information on the operating systems detected on the hosts in your monitored network.

For more information, see the following sections:

rna_host_os Fields

The following table describes the fields you can access in the rna_host_os table.

Table 6-25 rna_host_os Fields
Field	Description
`confidence`	The Secure Firewall-assigned confidence rating (from `0` to `100`) for the identification of the operating system.
`created_sec`	The UNIX timestamp of the date and time the system first detected host activity.
`host_id`	ID number of the host.
`last_seen_sec`	The UNIX timestamp of the date and time the system last detected host activity.
`os_uuid`	A unique identifier for the operating system detected on the host. The UUID maps to the operating system name, vendor, and version in the Secure Firewall database.
`product`	The operating system detected on the host.
`source_type`	The source of the host’s operating system identity: `User` — Name of the user who entered the data via the web user interface `Application` — Imported from another application via the host input feature `Scanner` — Either Nmap or another scanner added through system policy `rna` — Detected by the Secure Firewall, either by a discovery event, port match, or pattern match `NetFlow` — The data was exported by a NetFlow-enabled device
`vendor`	The vendor of the operating system detected on the host.
`version`	The version of the operating system detected on the host.

rna_host_os Joins

The following table describes the joins you can perform on the rna_host_os table.

Table 6-26 rna_host_os Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_os Sample Query

The following query returns operating system information for the host with host_id of 8.

SELECT vendor, product, version, source_type, confidence

FROM rna_host_os

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_os_vulns

The rna_host_os_vulns table contains information on the vulnerabilities associated with the hosts in your monitored network.

For more information, see the following sections:

rna_host_os_vulns Fields

The following table describes the fields you can access in the rna_host_os_vulns table.

Table 6-27 rna_host_os_vulns Fields
Field	Description
`host_id`	ID number of the host.
`invalid`	A value indicating whether the vulnerability is valid for the host: `0` — Vulnerability is valid `1` — Vulnerability is invalid
`rna_vuln_id`	An internal identification number for the vulnerability.

rna_host_os_vulns Joins

The following table describes the joins you can perform on the rna_host_os_vulns table.

Table 6-28 rna_host_os_vulns Joins
You can join this table on...	And...
`rna_vuln_id`	`rna_vuln. bugtraq_id rna_vuln. rna_vuln_id rna_host_third_party_vuln_rna_id. rna_vuln_id rna_host_third_party_vuln_cve_id. cve_id rna_host_third_party_vuln_bugtraq_id. bugtraq_id`
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_os_vulns Sample Query

The following query returns the operating system vulnerabilities for the host with host_id of 8.

SELECT rna_vuln_id, invalid

FROM rna_host_os_vulns

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_protocol

The rna_host_protocol table contains information on the protocols detected on the hosts in your monitored network.

For more information, see the following sections:

rna_host_protocol Fields

The following table describes the fields you can access in the rna_host_protocol table.

Table 6-29 rna_host_protocol Fields
Field	Description
`host_id`	ID number of the host.
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`layer`	The network layer where the protocol is running: `Network` or `Transport`.
`mac_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`mac_vendor`	Field deprecated in Version 5.2. Returns `null` for all queries.
`protocol_name`	The traffic protocol used by the host.
`protocol_num`	The IANA-specified protocol number for the protocol.

rna_host_protocol Joins

The following table describes the joins you can perform on the rna_host_protocol table.

Table 6-30 rna_host_protocol Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_protocol Sample Query

The following query returns all protocol records for the host with host_id of 8.

SELECT protocol_num, protocol_name

FROM rna_host_protocol

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_sensor

The rna_host_sensor table lists the host IP addresses in your monitored network and indicates the managed device that detected each one.

The rna_host_sensor table supersedes the deprecated rna_ip_host_sensor table starting with Version 5.2 of the Secure Firewall.

For more information, see the following sections:

rna_host_sensor Fields

The following table describes the fields you can access in the rna_host_sensor table.

Table 6-31 rna_host_sensor Fields
Field	Description
`host_id`	ID number of the host.
`sensor_address`	The IP address of the managed device that generated the discovery event. Format is ipv4_address,ipv6_address.
`sensor_name`	The name of the managed device.
`sensor_uuid`	A unique identifier for the managed device, or `0` if `sensor_name` is `null`.

rna_host_sensor Joins

The following table describes the joins you can perform on the rna_host_sensor table.

Table 6-32 rna_host_sensor Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_sensor Sample Query

The following query returns up to 25 hosts, and the sensor that detected them, from the rna_host_sensor table.

SELECT host_id, sensor_address, sensor_name

FROM rna_host_sensor

LIMIT 0, 25;

rna_host_service

The rna_host_service table contains general information about the servers detected on the hosts in your managed network through network port and traffic protocol combinations.

For more information, see the following sections:

rna_host_service Fields

The following table describes the fields you can access in the rna_host_service table.

Table 6-33 rna_host_service Fields
Field	Description
`confidence`	The Secure Firewall-assigned confidence rating (from `0` to `100`) for the identification of the server.
`hits`	The number of times the server was detected.
`host_id`	ID number of the host.
`last_used_sec`	UNIX timestamp of the date and time the system last detected server activity.
`port`	The port used by the server.
`protocol`	The traffic protocol: `TCP` or `UDP`.

rna_host_service Joins

The following table describes the joins you can perform on the rna_host_service table.

Table 6-34 rna_host_service Joins
You can join this table on...	And...
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id
The set of: `host_id port protocol`	The set of: `rna_host_service_banner. host_id rna_host_service_banner. port rna_host_service_banner. protocol` The set of: `rna_host_service_info. host_id rna_host_service_info. port rna_host_service_info. protocol` The set of: `rna_host_service_payload. host_id rna_host_service_payload. port rna_host_service_payload. protocol`

rna_host_service Sample Query

The following query returns the first 25 detected server records for the host with host_id of 8 :

SELECT hits, protocol, port, confidence

FROM rna_host_service

WHERE HEX(host_id) = "00000000000000000000000000000008"

LIMIT 0, 25;

rna_host_service_banner

The rna_ip_host_service_banner table contains header information from network traffic that advertises vendors and versions (“banners”) for the servers on hosts in your monitored network. Keep in mind that the Secure Firewall does not store server banners unless you enable the Capture Banners option in the your network discovery policy.

For more information, see the following sections:

rna_host_service_banner Fields

The following table describes the fields you can access in the rna_host_service_banner table.

Table 6-35 rna_host_service_banner Fields
Field	Description
`banner`	The server banner, that is, the first 256 bytes of the first packet detected for the server.
`host_id`	ID number of the host.
`port`	The port used by the server.
`protocol`	The traffic protocol: `TCP` or `UDP`.

rna_host_service_banner Joins

The following table describes the joins you can perform on the rna_host_service_banner table.

Table 6-36 rna_host_service_banner Joins
You can join this table on...	And...
The set of: `host_id port protocol`	The set of: `rna_host_service. host_id rna_host_service. port rna_host_service. protocol` The set of: `rna_host_service_info. host_id rna_host_service_info. port rna_host_service_info. protocol` The set of: `rna_host_service_payload. host_id rna_host_service_payload. port rna_host_service_payload. protocol`
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_service_banner Sample Query

The following query returns the server banner for the host with host_id of 8.

SELECT port, protocol, banner

FROM rna_host_service_banner

WHERE HEX(host_id) = “00000000000000000000000000000008”;

rna_host_service_info

The rna_host_service_info table contains detailed information about the servers detected on the hosts in your monitored network.

For more information, see the following sections:

rna_host_service_info Fields

The following table describes the fields you can access in the rna_host_service_info table.

Table 6-37 rna_host_service_info Fields
Field	Description
`application_id`	Field deprecated in Version 5.0. Returns blank for all queries.
`application_protocol_id`	An internal identifier for the detected application protocol, if available.
`application_protocol_name`	One of: the name of the application protocol, if a positive identification can be made `pending` if the system requires more data blank if there is no application information in the connection
`business_relevance`	An index (from `1` to `5`) of the application’s relevance to business productivity where `1` is very low and `5` is very high.
`business_relevance_ description`	A description of business relevance ( `very low`, `low`, `medium`, `high`, `very high`).
`created_sec`	The UNIX timestamp of the date and time the system first detected the application protocol.
`host_id`	ID number of the host.
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`last_used_sec`	The UNIX timestamp of the date and time the system last detected server activity.
`port`	The port used by the server.
`protocol`	The traffic protocol: `TCP` or `UDP`.
`risk`	An index (from `1` to `5`) of the application’s risk where `1` is very low risk and `5` is very high risk.
`risk_description`	A description of the risk ( `very low`, `low`, `medium`, `high`, `very high`).
`service_info_id`	An internal identification number for the server.
`service_name`	Field deprecated in Version 5.0. Returns `null` for all queries.
`source_type`	The source of the identity of the server: `User` — Name of the user who entered the data via the web user interface `Application` — Imported from another application via the host input feature `Scanner` — Added through NMAP or imported via the host input feature with a source type of Scanner `rna` — Detected by the Secure Firewall, either by a discovery event, port match, or pattern match `NetFlow` — The data was exported by a NetFlow-enabled device
`vendor`	The vendor of the server on the host.
`version`	The version of the server detected on the host.

rna_host_service_info Joins

The following table describes the joins you can perform on the rna_host_service_info table.

Table 6-38 rna_host_service_info Joins
You can join this table on...	And...
`application_protocol_id`	`app_ids_stats_current_timeframe. application_id application_info. application_id application_host_map. application_id application_tag_map. application_id app_stats_current_timeframe. application_id connection_summary. application_protocol_id rna_host_client_app_payload. web_application_id rna_host_client_app_payload. client_application_id rna_host_client_app. client_application_id rna_host_client_app. application_protocol_id rna_host_service_payload. web_application_id`
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_payload. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id
The set of: `host_id` and `port` and `protocol`	The set of: `rna_host_service. host_id rna_host_service. port rna_host_service. protocol` The set of: `rna_host_service_banner. host_id rna_host_service_banner. port rna_host_service_banner. protocol` The set of: `rna_host_service_payload. host_id rna_host_service_payload. port rna_host_service_payload. protocol`

rna_host_service_info Sample Query

The following query returns information about the application protocols detected on the host with host_id of 8.

SELECT host_id, application_protocol_name, version, vendor, created_sec, last_used_sec, business_relevance, risk

FROM rna_host_service_info

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_service_payload

The rna_host_service_payload table contains information on the web applications associated by the hosts in your monitored network.

For more information, see the following sections:

rna_host_service_payload Fields

The following table describes the fields you can access in the rna_host_service_payload table.

Table 6-39 rna_host_service_payload Fields
Field	Description
`application_id`	Field deprecated in Version 5.0. Returns `null` for all queries.
`application_name`	Field deprecated in Version 5.0. Returns `null` for all queries.
`host_id`	ID number of the host.
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`payload_name`	Field deprecated in Version 5.0. Returns `null` for all queries.
`payload_type`	Field deprecated in Version 5.0. Returns `null` for all queries.
`port`	The port used by the server.
`protocol`	The traffic protocol: `TCP` or `UDP`.
`web_application_id`	The internal identification number for the web application.
`web_application_name`	One of: the name of the web application, if a positive identification can be made `web browsing` if the system detects an application protocol of HTTP but cannot identify a specific web application blank if the connection has no HTTP traffic

rna_host_service_payload Joins

The following table describes the joins you can perform on the rna_host_service_payload table.

Table 6-40 rna_host_service_payload Joins
You can join this table on...	And...
`web_application_id`	`app_ids_stats_current_timeframe. application_id application_info. application_id application_host_map. application_id application_tag_map. application_id app_stats_current_timeframe. application_id connection_summary. application_protocol_id rna_host_service_info. application_protocol_id rna_host_client_app_payload. web_application_id rna_host_client_app_payload. client_application_id rna_host_client_app. client_application_id rna_host_client_app. application_protocol_id`
The set of: `host_id port protocol`	The set of: `rna_host_service. host_id rna_host_service. port rna_host_service. protocol` The set of: `rna_host_service_banner. host_id rna_host_service_banner. port rna_host_service_banner. protocol` The set of: `rna_host_service_info. host_id rna_host_service_info. port rna_host_service_info. protocol`
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_vulns. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_service_payload Sample Query

The following query returns information about the web applications detected on the host with host_id of 8.

SELECT host_id, web_application_id, web_application_name, port, protocol

FROM rna_host_service_payload

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_service_subtype

The rna_host_service_subtype table contains information on the sub-servers for a server detected on the hosts in your monitored network.

For more information, see the following sections:

rna_host_service_subtype Fields

The following table describes the fields you can access in the rna_host_service_subtype table.

Table 6-41 rna_host_service_subtype Fields
Field	Description
`host_id`	ID number of the host.
`port`	The port used by the server.
`protocol`	The traffic protocol: `TCP` or `UDP`.
`service_name`	One of: the server on the host that is associated with the triggering event `none` or blank if data for an identification is unavailable `pending` if additional data is required `unknown` if the system cannot identify the server based on known server fingerprints
`source_type`	The source of the identity of the server: `User` - name of the user who entered the data via the web user interface `Application` - imported from another application via the host input feature `Scanner` - added through NMAP or imported via the host input feature with a source type of Scanner `rna` - detected by the Secure Firewall, either by a discovery event, port match, or pattern match `NetFlow` - the data was exported by a NetFlow-enabled device
`sub_service_name`	The sub-server detected on the host.
`sub_service_vendor`	The vendor of the sub-server detected on the host.
`sub_service_version`	The version of the sub-server detected on the host.
`vendor`	The vendor of the server detected on the host.
`version`	The version of the server detected on the host.

rna_host_service_subtype Joins

You cannot perform joins on the rna_host_service_subtype table.

rna_host_service_subtype Sample Query

The following query returns all detected sub-server records for the host with host_id of 8.

SELECT host_id, service_name, version, sub_service_name, sub_service_version, sub_service_vendor

FROM rna_host_service_subtype

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_service_vulns

The rna_host_service_vulns table contains information on the vulnerabilities mapped to the servers detected on the hosts in your monitored network.

For more information, see the following sections:

rna_host_service_vulns Fields

The following table describes the fields you can access in the rna_host_service_vulns table.

Table 6-42 rna_host_service_vulns Fields
Field	Description
`application_id`	An internal identification number for the application protocol running on the host.
`application_name`	The application protocol name that appears in the user interface.
`host_id`	ID number of the host.
`invalid`	A value indicating whether the vulnerability is valid for the host running the application protocol: `0` — Vulnerability is valid `1` — Vulnerability is invalid
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`port`	The port used by the server.
`protocol`	The traffic protocol: `TCP` or `UDP`.
`rna_vuln_id`	An internal identification number for the vulnerability.
`service_name`	Field deprecated in Version 5.0. Returns `null` for all queries.
`vendor`	The vendor of the server detected on the host.
`version`	The version of the server detected on the host.

rna_host_service_vulns Joins

The following table describes the joins you can perform on the rna_host_service_vulns table.

Table 6-43 rna_host_service_vulns Joins
You can join this table on...	And...
`rna_vuln_id`	`rna_vuln. bugtraq_id rna_vuln. rna_vuln_id rna_host_third_party_vuln_rna_id. rna_vuln_id rna_host_third_party_vuln_cve_id. cve_id rna_host_third_party_vuln_bugtraq_id. bugtraq_id`
`host_id`	rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_payload. host_id rna_host_third_party_vuln_bugtraq_id. host_id rna_host_third_party_vuln_cve_id. host_id rna_host_third_party_vuln_rna_id. host_id rna_host_third_party_vuln. host_id

rna_host_service_vulns Sample Query

The following query returns information about all server vulnerabilities for the host with host_id of 8.

SELECT host_id, rna_vuln_id, vendor, service_name, version, invalid FROM rna_host_service_vulns

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_third_party_vuln

The rna_host_third_party_vuln table contains information on the third-party vulnerabilities associated with the hosts in your monitored network. Note that the information in this table is determined by the third-party vulnerability data imported via the host input feature.

For more information, see the following sections:

rna_host_third_party_vuln Fields

The following table describes the fields you can access in the rna_host_third_party_vuln table.

Table 6-44 rna_host_third_party_vuln Fields
Field	Description
`description`	A description of the vulnerability.
`host_id`	ID number of the host.
`invalid`	A value indicating whether the vulnerability is valid for the host: `0` — Vulnerability is valid `1` — Vulnerability is invalid
`name`	The title of the vulnerability.
`port`	A port number, if the vulnerability is associated with a server or related application detected on a specific port.
`protocol`	The traffic protocol ( `TCP` or `UDP`), if the vulnerability is associated with an application using that protocol.
`source`	The source of the vulnerability.
`third_party_vuln_id`	An identification number associated with the vulnerability.

rna_host_third_party_vuln Joins

The following table describes the joins you can perform on the rna_host_third_party_vuln table.

Table 6-45 rna_host_third_party_vuln Joins
You can join this table on...	And...
`host_id`	`rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id`

rna_host_third_party_vuln Sample Query

The following query returns information about the third party vulnerabilities for host with host_id of 8.

SELECT host_id, third_party_vuln_id, name, description, source, invalid

FROM rna_host_third_party_vuln

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_third_party_vuln_bugtraq_id

The rna_host_third_party_vuln_bugtraq_id table contains information on the third-party vulnerabilities that are mapped to vulnerabilities in the Bugtraq database and also associated with hosts in your monitored network. Note that the third-party vulnerability data in this table is imported via the host input feature.

For more information, see the following sections:

rna_host_third_party_vuln_bugtraq_id Fields

The following table describes the fields you can access in the rna_host_third_party_vuln_bugtraq_id table.

Table 6-46 rna_host_third_party_vuln_bugtraq_id Fields
Field	Description
`bugtraq_id`	The Bugtraq database identification number associated with the vulnerability.
`description`	A description of the vulnerability.
`host_id`	ID number of the host.
`invalid`	A value indicating whether the vulnerability is valid for the host: `0` — Vulnerability is valid `1` — Vulnerability is invalid
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`name`	The name, or title, of the vulnerability.
`port`	A port number, if the vulnerability is associated with a server or related application detected on a specific port.
`protocol`	The traffic protocol ( `TCP` or `UDP`), if the vulnerability is associated with an application using that protocol.
`source`	The source of the vulnerability.
`third_party_vuln_id`	The third-party identification number associated with the vulnerability.

rna_host_third_party_vuln_bugtraq_id Joins

The following table describes the joins you can perform on the rna_host_third_party_vuln_bugtraq_id table.

Table 6-47 rna_host_third_party_vuln_bugtraq_id Joins
You can join this table on...	And...
`bugtraq_id`	`rna_vuln. bugtraq_id rna_vuln. rna_vuln_id rna_host_os_vulns. rna_vuln_id rna_host_service_vulns. rna_vuln_id`
`host_id`	`rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id`

rna_host_third_party_vuln_bugtraq_id Sample Query

The following query returns the BugTraq vulnerabilities for the host with host_id of 8.

SELECT host_id, third_party_vuln_id, bugtraq_id, name, description, source, invalid

FROM rna_host_third_party_vuln_bugtraq_id

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_third_party_vuln_cve_id

The rna_host_third_party_vuln_cve_id table contains information on the third-party vulnerabilities that are mapped to vulnerabilities in MITRE’s CVE database and also associated with the hosts in your monitored network. Note that this table contains third-party vulnerability data imported via the host input feature.

For more information, see the following sections:

rna_host_third_party_vuln_cve_id Fields

The following table describes the fields you can access in the rna_host_third_party_vuln_cve_id table.

Table 6-48 rna_host_third_party_vuln_cve_id Fields
Field	Description
`cve_id`	The identification number associated with the vulnerability in MITRE’s CVE database.
`description`	A description of the vulnerability.
`host_id`	ID number of the host.
`invalid`	A value indicating whether the vulnerability is valid for the host: `0` — Vulnerability is valid `1` — Vulnerability is invalid
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`name`	The name, or title, of the vulnerability.
`port`	A port number, if the vulnerability is associated with a server or related application detected on a specific port.
`protocol`	The traffic protocol ( `TCP` or `UDP`), if the vulnerability is associated with an application using that protocol.
`source`	The source of the vulnerability.
`third_party_vuln_id`	The identification number associated with the vulnerability.

rna_host_third_party_vuln_cve_id Joins

The following table describes the joins you can perform on the rna_host_third_party_vuln_cve_id table.

Table 6-49 rna_host_third_party_vuln_cve_id Joins
You can join this table on...	And...
`cve_id`	`rna_vuln. bugtraq_id rna_vuln. rna_vuln_id rna_host_os_vulns. rna_vuln_id rna_host_service_vulns. rna_vuln_id`
`host_id`	`rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id`

rna_host_third_party_vuln_cve_id Sample Query

The following query returns the CVE vulnerabilities for the host with host_id of 8.

SELECT host_id, third_party_vuln_id, cve_id, name, description, source, invalid

FROM rna_host_third_party_vuln_cve_id

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_host_third_party_vuln_rna_id

The rna_host_third_party_vuln_rna_id table contains information on third-party vulnerabilities that are mapped to vulnerabilities in the Secure Firewall vulnerability database (VDB) and also associated with hosts in your monitored network. Note that the third-party vulnerability data in this table is imported via the host input feature.

For more information, see the following sections:

rna_host_third_party_vuln_rna_id Fields

The following table describes the fields you can access in the rna_host_third_party_vuln_rna_id table.

Table 6-50 rna_host_third_party_vuln_rna_id Fields
Field	Description
`description`	A description of the vulnerability.
`host_id`	ID number of the host.
`invalid`	A value indicating whether the vulnerability is valid for the host: `0` — Vulnerability is valid `1` — Vulnerability is invalid
`ip_address`	Field deprecated in Version 5.2. Returns `null` for all queries.
`name`	The name, or title, of the vulnerability.
`port`	A port number, if the vulnerability is associated with a server or related application detected on a specific port.
`protocol`	The traffic protocol ( `TCP` or `UDP`), if the vulnerability is associated with an application using that protocol.
`rna_vuln_id`	The vulnerability identification number that Cisco uses to track the vulnerability.
`source`	The source of the vulnerability.
`third_party_vuln_id`	The identification number associated with the vulnerability.

rna_host_third_party_vuln_rna_id Joins

The following table describes the joins you can perform on the rna_host_third_party_vuln_rna_id table.

Table 6-51 rna_host_third_party_vuln_rna_id Joins
You can join this table on...	And...
`rna_vuln_id`	`rna_vuln. bugtraq_id rna_vuln. rna_vuln_id rna_host_os. rna_vuln_id rna_host_service_vulns. rna_vuln_id`
`host_id`	`rna_host. host_id rna_host_attribute. host_id rna_host_protocol. host_id rna_host_os_vulns. host_id application_host_map. host_id rna_host_client_app. host_id rna_host_client_app_payload. host_id rna_host_ioc_state. host_id rna_host_ip_map. host_id rna_host_mac_map. host_id rna_host_os. host_id rna_host_sensor. host_id rna_host_service. host_id rna_host_service_banner. host_id rna_host_service_info. host_id rna_host_service_payload. host_id rna_host_service_vulns. host_id`

rna_host_third_party_vuln_rna_id Sample Query

The following query returns all third party vulnerabilities with VDB IDs for the host with host_id of 8.

SELECT host_id, third_party_vuln_id, rna_vuln_id, name, description, source, invalid

FROM rna_host_third_party_vuln_rna_id

WHERE HEX(host_id) = "00000000000000000000000000000008";

rna_vuln

The rna_vuln table contains information on the vulnerabilities in the Cisco VDB.

For more information, see the following sections:

rna_vuln Fields

The following table describes the fields you can access in the rna_vuln table.

Table 6-52 rna_vuln Fields
Field	Description
`authentication`	Whether authentication is required to exploit the vulnerability: `Required` `Not Required` `Unknown`
`availability`	When the vulnerability can be exploited: `Always` `User Initiated` `Time Dependent` `Unknown`
`available_exploits`	Whether there are available exploits for the vulnerability: `TRUE` `FALSE`
`bugtraq_id`	The identification number associated with the vulnerability in the Bugtraq database.
`class`	The class of vulnerability: `Configuration Error` `Boundary Condition Error` `Design Error`
`credibility`	How credible the vulnerability is: `Conflicting Reports` `Conflicting Details` `Single Source` `Reliable Source` `Multiple Sources` `Vendor Confirmed`
`credit`	The person or organization credited with reporting the vulnerability.
`ease`	The ease of exploiting the vulnerability: `No Exploit Required` `Exploit Available` `No Exploit Available`
`effect`	Details on what could happen when the vulnerability is exploited.
`entry_date`	The date the vulnerability was entered in the database.
`exploit`	Information on where you can find exploits for the vulnerability.
`impact`	The vulnerability impact, corresponding to the impact level determined through correlation of intrusion data, discovery events, and vulnerability assessments. The value can be from `1` to `10`, with `10` being the most severe. The impact value of a vulnerability is determined by the writer of the Bugtraq entry.
`local`	Indicates whether the vulnerability must be exploited locally: `TRUE` `FALSE`
`long_description`	A general description of the vulnerability.
`mitigation`	A description of how you can mitigate the vulnerability.
`modified_date`	The date of the most recent modification to the vulnerability, if applicable.
`publish_date`	The date the vulnerability was published.
`remote`	Indicates whether the vulnerability can be exploited across a network: `TRUE` `FALSE`
`rna_vuln_id`	The Cisco vulnerability ID number that the system uses to track vulnerabilities.
`scenario`	A description of a scenario where an attacker is exploiting the vulnerability.
`short_description`	A summary description of the vulnerability.
`snort_id`	The identification number associated with the vulnerability in the Snort ID (SID) database. That is, if an intrusion rule can detect network traffic that exploits a particular vulnerability, that vulnerability is associated with the intrusion rule’s SID.
`solution`	The solution to the vulnerability.
`technical_description`	The technical description of the vulnerability.
`title`	The title of the vulnerability.

rna_vuln Joins

The following table describes the joins you can perform on the rna_vuln table.

Table 6-53 rna_vuln Joins
You can join this table on...	And...
`rna_vuln_id` or `bugtraq_id`	`rna_host_os_vulns. rna_vuln_id rna_host_service_vulns. rna_vuln_id rna_host_third_party_vuln_rna_id. rna_vuln_id rna_host_third_party_vuln_cve_id. cve_id rna_host_third_party_vuln_bugtraq_id. bugtraq_id`

rna_vuln Sample Query

The following query returns information about up to 25 vulnerabilities. The records are sorted in order of most events generated based on the vulnerability.

SELECT rna_vuln_id, bugtraq_id, snort_id, title, publish_date, impact, remote, exploit, long_description, technical_description, solution, count(*) as count

FROM rna_vuln

GROUP BY rna_vuln_id

ORDER BY rna_vuln_id DESC LIMIT 0, 25;

tag_info

The tag_info table contains information on the tags that are associated with the applications detected on your network. Note that an application can have multiple associated tags.

For more information, see the following sections:

tag_info Fields

The following table describes the fields you can access in the tag_info table.

Table 6-54 tag_info Fields
Field	Description
`domain_name`	Name of the domain on which the application was detected.
`domain_uuid`	UUID of the domain on which the application was detected. This is presented in binary.
`tag_description`	Tag description.
`tag_id`	Internal identifier for the tag.
`tag_name`	Text of the tag that appears in the user interface.
`tag_type`	One of the following: `category` `tag`

tag_info Joins

The following table describes the joins you can perform on the tag_info table.

Table 6-55 tag_info Joins
You can join this table on...	And...
`tag_id`	`application_tag_map. tag_id`

tag_info Sample Query

The following query returns the application tag record for a selected tag ID within the Global \ Company B \ Edge domain.

SELECT tag_id, tag_name, tag_type, tag_description

FROM tag_info

WHERE tag_id="100" AND domain_name= "Global \ Company B \ Edge";

url_categories

The url_categories table lists the categories that characterize URLs requested by hosts in your monitored network.

For more information, see the following sections:

url_categories Fields

The following table describes the fields in the url_categories table.

Table 6-56 url_categories Fields
Field	Description
`category_description`	The description of the URL category.
`category_id`	The internal identification number of the URL category.

url_categories Joins

You cannot perform joins on the url_categories table.

url_categories Sample Query

The following query returns a category record for the selected category ID.

SELECT category_id, category_description

FROM url_categories

WHERE category_id="1";

url_reputations

The url_reputations table lists the reputations that characterize URLs requested by hosts in your monitored request.

For more information, see the following sections:

url_reputations Fields

The following table describes the fields in the url_reputations table.

Table 6-57 url_reputations Fields
Field	Description
`reputation_description`	The description of the reputation.
`reputation_id`	An internal identification number for the URL reputation.

url_reputations Joins

You cannot perform joins on the url_reputations table.

url_reputations Sample Query

The following query returns URL reputation information for a reputation ID.

SELECT reputation_id, reputation_description

FROM url_reputations

WHERE reputation_id="1";

user_ipaddr_history

The user_ipaddr_history table contains information on user activity for a particular host in your monitored network.

For more information, see the following sections:

user_ipaddr_history Fields

The following table describes the fields you can access in the user_ipaddr_history table.

Table 6-58 user_ipaddr_history Fields
Field	Description
`authentication_type`	Type of authentication used by the user. Values may be: `0` - no authorization required `1` - passive authentication, AD agent, or ISE session `2` - captive portal successful authentication `3` - captive portal guest authentication `4` - captive portal failed authentication
`domain_name`	Name of the domain on which the user was detected.
`domain_uuid`	UUID of the domain on which the user was detected. This is presented in binary.
`endpoint_profile`	Name of the type of device used by the connection endpoint.
`end_time_sec`	The UNIX timestamp of the date and time the Secure Firewall detected a different user logging into the host, marking the assumed end of the previous user’s session. Note that the Secure Firewall does not detect logoffs.
`id`	An internal identification number for the user history record.
`ipaddr`	A binary representation of the IP address of the host.
`location_ip`	IP address of the interface communicating with ISE. Can be IPv4 or IPv6.
`start_time_sec`	The UNIX timestamp of the date and time the Secure Firewall detected the user logging into host.
`security_group`	ID number of the network traffic group.
`user_dept`	The department of the user.
`user_email`	The email address of the user.
`user_first_name`	The first name of the user.
`user_id`	An internal identification number for the user.
`user_last_name`	The last name of the user.
`user_last_seen_sec`	The UNIX timestamp of the date and time the Secure Firewall last detected user activity for the user.
`user_last_updated_sec`	The UNIX timestamp of the date and time the Secure Firewall last updated the user record for the user.
`user_name`	The user name of the user.
`user_phone`	The phone number of the user.
`user_rna_service`	Name of the application protocol being used when the user was detected, if available.

user_ipaddr_history Joins

The following table describes the joins you can perform on the user_ipaddr_history table.

Table 6-59 user_ipaddr_history Joins
You can join this table on...	And...
`ipaddr`	`compliance_event.dst_ipaddr compliance_event.src_ipaddr connection_summary. initiator_ipaddr connection_summary. responder_ipaddr network_discovery_event. ipaddr rna_host_ip_map. ipaddr user_discovery_event. ipaddr white_list_event.ipaddr`
`user_id`	`discovered_users. user_id user_discovery_event. user_id rna_host_ioc_state. host_id`

user_ipaddr_history Sample Query

The following query returns all user activity records for the selected IP address after the specified start timestamp.

SELECT ipaddr, start_time_sec, end_time_sec, user_name, user_rna_service, user_last_seen_sec, user_last_updated_sec

FROM user_ipaddr_history

WHERE HEX(ipaddr) = "00000000000000000000FFFF0A0A0A04" AND start_time_sec >= UNIX_TIMESTAMP("2011-10-01 00:00:00");

Secure Firewall Management Center Database Access Guide v7.2

Bias-Free Language

Results

Chapter: Schema - Discovery and Network Map Tables

Schema: Discovery Event and Network Map Tables

application_host_map

application_host_map Fields

application_host_map Joins

application_host_map Sample Query

application_info

application_info Fields

application_info Joins

application_info Sample Query

application_tag_map

application_tag_map Fields

application_tag_map Joins

application_tag_map Sample Query

domain_control_information

domain_control_information Fields

domain_control_information Joins

domain_control_information Sample Query

network_discovery_event

network_discovery_event Fields

network_discovery_event Joins

network_discovery_event Sample Query

rna_host

rna_host Fields

rna_host Joins

rna_host Sample Query

rna_host_attribute

rna_host_attribute Fields

rna_host_attribute Joins

rna_host_attribute Sample Query

rna_host_client_app

rna_host_client_app Fields

rna_host_client_app Joins

rna_host_client_app Sample Query

rna_host_client_app_payload

rna_host_client_app_payload Fields

rna_host_client_app_payload Joins

rna_host_client_app_payload Sample Query

rna_host_ioc_state

rna_host_ioc_state Fields

rna_host_ioc_state Joins

rna_host_ioc_state Sample Query

rna_host_ip_map

rna_host_ip_map Fields

rna_host_ip_map Joins

rna_host_ip_map Sample Query

rna_host_mac_map

rna_host_mac_map Fields

rna_host_mac_map Joins

rna_host_mac_map Sample Query

rna_host_os

rna_host_os Fields

rna_host_os Joins

rna_host_os Sample Query

rna_host_os_vulns

rna_host_os_vulns Fields

rna_host_os_vulns Joins

rna_host_os_vulns Sample Query

rna_host_protocol

rna_host_protocol Fields

rna_host_protocol Joins

rna_host_protocol Sample Query

rna_host_sensor

rna_host_sensor Fields

rna_host_sensor Joins

rna_host_sensor Sample Query

rna_host_service

rna_host_service Fields

rna_host_service Joins

rna_host_service Sample Query

rna_host_service_banner

rna_host_service_banner Fields

rna_host_service_banner Joins

rna_host_service_banner Sample Query

rna_host_service_info

rna_host_service_info Fields

rna_host_service_info Joins