The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following topics describe how to work with discovery events:
Any.
Any
Admin
Security Analyst
The system generates tables of events that represent the changes detected in your monitored network. You can use these tables to review the user activity on your network and determine how to respond. The network discovery and identity policies specify the kinds of data you want to collect, the network segments you want to monitor, and the specific hardware interfaces you want to use to do it.
You can use discovery and identity event tables to identify threats associated with hosts, applications, and users on your network. The system provides a set of predefined workflows that you can use to analyze the events that your system generates. You can also create custom workflows that display only the information that matches your specific needs.
To collect and store network discovery and identity data for analysis, you must configure network discovery and identity policies. After you configure an identity policy, you must invoke it in your access control policy and deploy it to the devices you want to use to monitor traffic.
Your network discovery policy provides host, application, and non-authoritative user data. Your identity policy provides authoritative user data.
The following discovery event tables are located under the Analysis > Hosts and Analysis > Users menus.
|
Discovery Event Table |
Populated With Discovery Data? |
Populated With Identity Data? |
|---|---|---|
|
Hosts |
Yes |
No |
|
Host Indications of Compromise |
Yes |
No |
|
Applications |
Yes |
No |
|
Application Details |
Yes |
No |
|
Servers |
Yes |
No |
|
Host Attributes |
Yes |
No |
|
Discovery Events |
Yes |
Yes |
|
User Indications of Compromise |
Yes |
Yes |
|
Active Sessions |
Yes |
Yes |
|
User Activity |
Yes |
Yes |
|
Users |
Yes |
Yes |
|
Vulnerabilities |
Yes |
No |
|
Third-Party Vulnerabilities |
Yes |
No |
The Discovery Statistics page displays a summary of the hosts, events, protocols, application protocols, and operating systems detected by the system.
The page lists statistics for the last hour and the total accumulated statistics. You can choose to view statistics for a particular device, or all devices. You can also view events that match the entries on the page by clicking the event, server, operating system, or operating system vendor listed within the summary.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
|
Step 1 |
Choose . |
|
Step 2 |
From the Select Device list, choose the device whose statistics you want to view. Optionally, choose All to view statistics for all devices managed by the management center. |
|
Step 3 |
You have the following options:
|
Descriptions of the rows of the Statistics Summary section follow.
Total number of discovery events stored on the management center.
Total number of discovery events generated in the last hour.
Total number of discovery events generated in the last day.
Total number of application protocols from servers running on detected hosts.
Total number of detected hosts identified by unique IP address.
Total number of detected hosts not identified by IP address.
Note that the Total MAC Hosts statistic remains the same whether you are viewing discovery statistics for all devices or for a specific device. This is so because managed devices discover hosts based on their IP addresses. This statistic gives the total of all hosts that are identified by other means and is independent of a given managed device.
Total number of detected nodes identified as routers.
Total number of detected nodes identified as bridges.
Total percentage of the host limit currently in use. The host limit is defined by the model of your management center. Note that the host limit usage only appears if you are viewing statistics for all managed devices.
 Note |
If the host limit is reached and a host is deleted, the host will not reappear on the network map you purge discovery data. |
The date and time that the most recent discovery event occurred.
The date and time that the most recent connection was completed.
The Event Breakdown section lists a count of each type of discovery event and host input event that occurred within the last hour, as well as a count of the total number of each event type stored in the database.
You can also use the Event Breakdown section to view details on discovery and host input events.
The Protocol Breakdown section lists the protocols currently in use by detected hosts. It displays each detected protocol name, its “layer” in the protocol stack, and the total number of hosts that communicate using the protocol.
The Application Protocol Breakdown section lists the application protocols that are currently in use by detected hosts. It lists the protocol name, the total number of hosts running the application protocol in the past hour, and the total number of hosts that have been detected running the protocol at any point.
You can also use the Application Protocol Breakdown section to view details on servers using the detected protocols.
The OS Breakdown section lists the operating systems currently running on the monitored network, along with their vendors and the total number of hosts running each operating system.
A value of
unknown for the operating system name or version means
that the operating system or its version does not match any of the system’s
fingerprints. A value of
pending means that the system has not yet gathered
enough information to identify the operating system or its version.
You can use the OS Breakdown section to view details on the detected operating systems.
You can generate graphs that display performance statistics for managed devices with discovery events.
New data is accumulated for statistics graphs every five minutes. Therefore, if you reload a graph quickly, the data may not change until the next five-minute increment occurs.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
Edit the applicable network discovery policy to include applications, hosts, and users. (This may impact system performance.) See Configuring Network Discovery Rules and Actions and Discovered Assets.
You must be an Admin or Maintenance user to perform this task.
|
Step 1 |
Choose . |
|
Step 2 |
From the Select Device list, choose the management center or managed devices you want to include. |
|
Step 3 |
From the Select Graph(s) list, choose the type of graph you want to create as described in Discovery Performance Graph Types. |
|
Step 4 |
From the Select Time Range list, choose the time range you would like to use for the graph. |
|
Step 5 |
Click Graph to graph the selected statistics. |
Descriptions of the available graph types follow.
Displays a graph that represents the number of events that the Data Correlator processes per second
Displays a graph that represents the number of connections that the Data Correlator processes per second
Displays a graph that represents the number of events that the system generates per second
Displays a graph that represents the number of megabits of traffic that are analyzed by the discovery process per second
Displays a graph that represents the average number of bytes included in each packet analyzed by the discovery process
Displays a graph that represents the number of packets analyzed by the discovery process per second, in thousands
The management center provides a set of event workflows that you can use to analyze the discovery and identity data that is generated for your network. The workflows are, along with the network map, a key source of information about your network assets.
The management center provides predefined workflows for discovery and identity data, detected hosts and their host attributes, servers, applications, application details, vulnerabilities, user activities, and users. You can also create custom workflows.
|
Step 1 |
To access a predefined workflow:
|
||||||||
|
Step 2 |
To access a custom workflow, choose . |
||||||||
|
Step 3 |
To access a workflow based on a custom table, choose . |
||||||||
|
Step 4 |
Perform any of the following actions, which are common to all of the pages accessed in the network discovery workflows:
|
The system generates discovery events that communicate the details of changes in your monitored network segments. New events are generated for newly discovered network features, and change events are generated for any change in previously identified network assets.
During its initial network discovery phase, the system generates new events for each host and any TCP or UDP servers discovered running on each host. Optionally, you can configure the system to use exported NetFlow records to generate these new host and server events.
In addition, the system generates new events for each network, transport, and application protocol running on each discovered host. You can disable detection of application protocols in discovery rules configured to monitor NetFlow exporters, but not in discovery rules configured to monitor managed devices. If you enable host or user discovery in non-NetFlow discovery rules, applications are automatically discovered.
After the initial network mapping is complete, the system continuously records network changes by generating change events. Change events are generated whenever the configuration of a previously discovered asset changes.
When a discovery event is generated, it is logged to the database. You can use the management center web interface to view, search, and delete discovery events. You can also use discovery events in correlation rules. Based on the type of discovery event generated as well as other criteria that you specify, you can build correlation rules that, when used in a correlation policy, launch remediations and syslog, SNMP, and email alert responses when network traffic meets your criteria.
You can add data to the network map using the host input feature. You can add, modify, or delete operating system information, which causes the system to stop updating that information for that host. You can also manually add, modify, or delete application protocols, clients, servers, and host attributes or modify vulnerability information. When you do this, the system generates host input events.
You can configure the types of discovery events the system logs in your network discovery policy. When you view the discovery events table, the event type is listed in the Event column. Descriptions of the discovery event types follow.
This event is generated when the system detects a new MAC address for a previously discovered host.
This event is often generated when the system detects hosts passing traffic through a router. While each host has a different IP address, they all appear to have the MAC address associated with the router. When the system detects the actual MAC address associated with the IP address, it displays the MAC address in bold text within the host profile and displays an “ARP/DHCP detected” message within the event description in the event view.
This event is generated when the system drops a client from the database due to inactivity.
This event is generated when the system detects a payload (that is, a specific type of content, such as audio, video, or webmail) in HTTP traffic.
This event is generated when the system detects that a host IP address has changed due to DHCP address assignment.
This event is generated when a host is reusing an IP address; that is, when a host obtains an IP address formerly used by another physical host due to DHCP IP address assignment.
The device sees host traffic through different routers and is able to make a better determination of the host’s location.
The device detects an ARP transmission from the host, indicating that the host is on a local segment.
This event is generated when the host limit on the management center is exceeded and a monitored host is deleted from the network map.
This event is generated when the host limit on the management center is reached and a new host is dropped. Compare this with the previous event where old hosts are deleted from the network map when the host limit is reached.
To drop new hosts when the host limit is reached, go to and set When Host Limit Reached to Drop hosts.
This event is generated when an IOC (Indications of Compromise) is set for a host and generates an alert.
This event is generated when a host is dropped from the network map because the host has not produced traffic within the interval defined in the network discovery policy. Note that individual host IP addresses and MAC addresses time out individually; a host does not disappear from the network map unless all of its associated addresses have timed out.
If you change the networks you want to monitor in your network discovery policy, you may want to manually delete old hosts from the network map so that they do not count against your host limit.
This event is generated when the system detects that a detected host is actually a network device.
This event is generated when the system detects a new server or operating system identity that conflicts with a current active identity for that server or operating system.
If you want to resolve identity conflicts by rescanning the host to obtain newer active identity data, you can use Identity Conflict events to trigger an Nmap remediation.
This event is generated when server or operating system identity data from an active source times out.
If you want to refresh identity data by rescanning the host to obtain newer active identity data, you can use Identity Conflict events to trigger an Nmap remediation.
This event is generated when the system detects a change in the information associated with a specific MAC address or TTL value.
This event often occurs when the system detects hosts passing traffic through a router. While each host has a different IP address, they will all appear to have the MAC address associated with the router. When the system detects the actual MAC address associated with the IP address, it displays the MAC address in bold text within the host profile and displays an “ARP/DHCP detected” message within the event description in the event view. The TTL may change because the traffic may pass through different routers or if the system detects the actual MAC address of the host.
This event is generated when the system detects a change to a host’s NetBIOS name. This event will only be generated for hosts using the NetBIOS protocol.
This event is generated when the system detects a new client.
Note |
To collect and store client data for analysis, make sure that you enable application detection in your discovery rules in the network discovery policy. |
This event is generated when the system detects a new host running on the network.
This event can also be generated when a device processes NetFlow data that involves a new host. To generate an event in this case, configure the network discovery rule that manages NetFlow data to discover hosts.
This event is generated when the system detects that a host is communicating with a new network protocol (IP, ARP, and so on).
This event is generated when the system either detects a new operating system for a host, or a change in a host’s operating system.
This event is generated when the system detects a new TCP server port (for example, a port used by SMTP or web services) active on a host. This event is not used to identify the application protocol or the server associated with it; that information is transmitted in the TCP Server Information Update event.
This event can also be generated when a device processes NetFlow data involving a server on your monitored networks that does not already exist in the network map. To generate an event in this case, configure the network discovery rule that manages NetFlow data to discover applications.
This event is generated when the system detects that a host is communicating with a new transport protocol, such as TCP or UDP.
This event is generated when the system detects a new UDP server port running on a host.
This event can also be generated when a device processes NetFlow data involving a server on your monitored networks that does not already exist in the network map. To generate an event in this case, configure the network discovery rule that manages NetFlow data to discover applications.
This event is generated when the system detects that a TCP port has closed on a host.
This event is generated when the system has not detected activity from a TCP port within the interval defined in the system’s network discovery policy.
This event is generated when the system detects a change in a discovered TCP server running on a host.
This event may be generated if a TCP server is upgraded.
This event is generated when the system detects that a UDP port has closed on a host.
This event is generated when the system has not detected activity from a UDP port within the interval defined in the network discovery policy.
This event is generated when the system detects a change in a discovered UDP server running on a host.
This event may be generated if a UDP server is upgraded.
This event is generated when the system detects a change in the VLAN tag attributed to a host.
When you view a table of discovery events, the event type is listed in the Event column.
Contrast host input events, which are generated when a user takes a specific action (such as manually adding a host), with discovery events, which are generated when the system itself detects a change in your monitored network (such as detecting traffic from a previously undetected host).
You can configure the types of host input events that the system logs by modifying your network discovery policy.
If you understand the information the different types of host input events provide, you can more effectively determine which events you want to log and alert on, and how to use these alerts in correlation policies. In addition, knowing the names of the event types can help you craft more effective event searches. Descriptions of the different types of host input events follow.
This event is generated when a user adds a client.
This event is generated when a user adds a host.
This event is generated when a user adds a protocol.
This event is generated when the system adds the results of an Nmap scan to a host.
This event is generated when a user adds a server port.
This event is generated when a user deletes a client from the system.
This event is generated when a user deletes an IP address or subnet from the system.
This event is generated when a user deletes a protocol from the system.
This event is generated when a user deletes a server port or group of server ports from the system.
This event is generated when a user creates a new host attribute.
This event is generated when a user deletes a user-defined host attribute.
This event is generated when a user deletes a value assigned to a host attribute.
This event is generated when a user sets a host attribute value for a host.
This event is generated when a user changes the definition of a user-defined host attribute.
This event is generated when a user sets or modifies the host criticality value for a host.
This event is generated when a user sets the operating system for a host.
This event is generated when a user sets the vendor and version definitions for a server.
This event is generated when a vulnerability impact qualification is set.
When a vulnerability is disabled at a global level from being used for impact qualifications, or when a vulnerability is enabled at a global level, this event is generated.
This event is generated when a user invalidates (or reviews) a vulnerability or vulnerabilities.
This event is generated when a user validates a vulnerability that was previously marked as invalid.
Discovery events workflows allow you to view data from both discovery events and host input events. You can manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access events differs depending on the workflow you use. You can use the predefined workflow, which includes the table view of discovery events and a terminating host view page. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Choose . |
||
|
Step 2 |
You have the following options:
|
Descriptions of the fields that can be viewed and searched in the discovery events table follow.
The time that the system generated the event.
The discovery event type or host input event type.
The IP address associated with the host involved in the event.
The last user to log into the host involved in the event before the event was generated. If only non-authoritative users log in after an authoritative user, the authoritative user remains the current user for the host unless another authoritative user logs in.
The MAC address of the NIC used by the network traffic that triggered the discovery event. This MAC address can be either the actual MAC address of the host involved in the event, or the MAC address of a network device that the traffic passed through.
The MAC hardware vendor of the NIC used by the network traffic that triggered the discovery event.
When searching this field, enter virtual_mac_vendor to match events that involve virtual hosts.
The port used by the traffic that triggered the event, if applicable.
The text description of the event.
The domain of the device that discovered the host. This field is only present if you have ever configured the management center for multitenancy.
The name of the managed device that generated the event. For new host and new server events based on NetFlow data, this is the managed device that processed the data.
The system generates an event when it detects a host and collects information about it to build the host profile. You can use the management center web interface to view, search, and delete hosts.
While viewing hosts, you can create traffic profiles and compliance allow lists based on selected hosts. You can also assign host attributes, including host criticality values (which designate business criticality) to groups of hosts. You can then use these criticality values, allow lists, and traffic profiles within correlation rules and policies.
The system can add hosts to the network map from exported NetFlow records, but the available information for these hosts is limited; see Differences between NetFlow and Managed Device Data.
You can use the management center to view a table of hosts that the system has detected. Then, you can manipulate the view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access hosts differs depending on the workflow you use. Both predefined workflows terminate in a host view, which contains a host profile for every host that meets your constraints. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the host data:
|
|
Step 2 |
You have the following options:
|
When the system discovers a host, it collects data about that host. That data can include the host’s IP addresses, the operating system it is running, and more. You can view some of that information in the table view of hosts.
Descriptions of the fields that can be viewed and searched in the hosts table follow below.
The date and time any of the host’s IP addresses was last detected by the system. The Last Seen value is updated at least as often as the update interval you configured in the network discovery policy, as well as when the system generates a new host event for any of the host’s IP addresses.
For hosts with operating system data updated using the host input feature, the Last Seen value indicates the date and time when the data was originally added.
The IP addresses associated with the host.
The host’s detected MAC address of the NIC.
The MAC Address field appears in the Table View of Hosts, which you can find in the Hosts workflow. You can also add the MAC Address field to:
custom tables that include fields from the Hosts table
drill-down pages in custom workflows based on the Hosts table
The host’s detected MAC hardware vendor of the NIC.
The MAC Vendor field appears in the Table View of Hosts, which you can find in the Hosts workflow. You can also add the MAC Vendor field to:
custom tables that include fields from the Hosts table
drill-down pages in custom workflows based on the Hosts table
When searching this field, enter
virtual_mac_vendor to match events that involve virtual
hosts.
The user identity (username) of the currently logged in user on the host.
Note that when a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user. In addition, when a non-authoritative user is the current user on a host, that user still cannot be used for user control.
The user-specified criticality value assigned to the host.
The NetBIOS name of the host. Only hosts running the NetBIOS protocol will have a NetBIOS name.
VLAN ID used by the host.
The number of network hops from the device that detected the host to the host.
The type of host. Can be any of the following: host, mobile device, jailbroken mobile device, router, bridge, NAT device, and load balancer.
The methods the system uses to distinguish network devices include:
the analysis of Cisco Discovery Protocol (CDP) messages, which can identify network devices and their type (Cisco devices only)
the detection of the Spanning Tree Protocol (STP), which identifies a device as a switch or bridge
the detection of multiple hosts using the same MAC address, which identifies the MAC address as belonging to a router
the detection of TTL value changes from the client side, or TTL values that change more frequently than a typical boot time, which identify NAT devices and load balancers
If a device is not identified as a network device, it is categorized as a host.
When searching this field, enter
!host to search for all network devices.
The hardware platform for a mobile device.
One of the following:
The operating system (name, vendor, and version) either detected on the host or updated using Nmap or the host input feature
unknown if the
operating system does not match any known fingerprint
pending if the system has not yet gathered enough
information to identify the operating system
If the system detects multiple identities, it displays those identities in a comma-separated list.
This field appears when you invoke the hosts event view from the Custom Analysis widget on the dashboard. It is also a field option in custom tables based on the Hosts table.
When searching this field, enter
n/a to include hosts where the operating system has not
yet been identified.
This field is search only.
One of the following:
The vendor of the operating system detected on the host or updated using Nmap or the host input feature
unknown if the operating system does not match any
known fingerprint
pending if the
system has not yet gathered enough information to identify the operating system
If the system detects multiple vendors, it displays those vendors in a comma-separated list.
When searching this field, enter
n/a to include hosts where the operating system has not
yet been identified.
One of the following:
The operating system detected on the host or updated using Nmap or the host input feature
unknown if the
operating system does not match any known fingerprint
pending if the
system has not yet gathered enough information to identify the operating system
If the system detects multiple names, it displays those names in a comma-separated list.
When searching this field, enter
n/a to include hosts where the operating system has not
yet been identified.
One of the following:
The version of the operating system detected on the host or updated using Nmap or the host input feature
unknown if the
operating system does not match any known fingerprint
pending if the
system has not yet gathered enough information to identify the operating system
If the system detects multiple versions, it displays those versions in a comma-separated list.
When searching this field, enter
n/a to include hosts where the operating system has not
yet been identified.
The type of source used to establish the host’s operating system identity:
User: user_name
Application: app_name
Scanner: scanner_type (Nmap or scanner added through network discovery configuration)
Firepower for operating systems detected by the system
The system may reconcile data from multiple sources to determine the identity of an operating system.
One of the following:
the percentage of confidence that the system has in the identity of the operating system running on the host, for hosts detected by the system
100%, for operating systems identified by an active source, such as the host input feature or Nmap scanner
unknown, for hosts for which the system cannot
determine an operating system identity, and for hosts added to the network map
based on NetFlow data
When searching this field, enter
n/a to include hosts added to the network map based on
NetFlow data.
The user-defined content of the Notes host attribute.
The domain associated with the host. This field is only present if you have ever configured the management center for multitenancy.
Either the managed device that detected the traffic or the device that processed NetFlow or host input data.
If this field is blank, either of the following conditions is true:
The host was added to the network map by a device that is not explicitly monitoring the network where the host resides, as defined in the network discovery policy.
The host was added using the host input feature and has not also been detected by the system.
The number of events that match the information that appears in each row. This field appears only after you apply a constraint that creates two or more identical rows.
A traffic profile is a profile of the traffic on your network, based on connection data collected over a timespan that you specify. After you create a traffic profile, you can detect abnormal network traffic by evaluating new traffic against your profile, which presumably represents normal network traffic.
You can use the Hosts page to create a traffic profile for a group of hosts that you specify. The traffic profile will be based on connections detected where one of the hosts you specify is the initiating host. Use the sort and search features to isolate the hosts for which you want to create a profile.
You must be an Admin user to perform this task.
|
Step 1 |
On a table view in the hosts workflow, check the check boxes next to the hosts for which you want to create a traffic profile. |
|
Step 2 |
At the bottom of the page, click Create Traffic Profile. |
|
Step 3 |
Modify and save the traffic profile according to your specific needs. |
Compliance allow lists allow you to specify which operating systems, clients, and network, transport, or application protocols are allowed on your network.
You can use the Hosts page to create a compliance allow list based on the host profiles of a group of hosts that you specify. Use the sort and search features to isolate the hosts that you want to use to create an allow list.
You must be an Admin user to perform this task.
|
Step 1 |
On a table view in the hosts workflow, check the check boxes next to the hosts for which you want to create an allow list. |
|
Step 2 |
At the bottom of the page, click CreateAllow List. |
|
Step 3 |
Modify and save the allow list according to your specific needs. |
The system collects information about the hosts it detects and uses that information to build host profiles. However, there may be additional information about the hosts on your network that you want to provide to your analysts. You can add notes to a host profile, set the business criticality of a host, or provide any other information that you choose. Each piece of information is called a host attribute.
You can use host attributes in host profile qualifications, which constrain the data you collect while building a traffic profile, and also can limit the conditions under which you want to trigger a correlation rule. You can also set attribute values in response to a correlation rule.
You can use the management center to view a table of hosts detected by the system, along with their host attributes. Then, you can manipulate the view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access host attributes differs depending on the workflow you use. You can use the predefined workflow, which includes a table view of host attributes that lists all detected hosts and their attributes, and terminates in a host view page, which contains a host profile for every host that meets your constraints.
You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the host attributes data:
|
|
Step 2 |
You have the following options:
|
Note that the host attributes table does not display hosts identified only by MAC addresses.
Descriptions of the fields that can be viewed and searched in the host attributes table follow.
The IP addresses associated with a host.
The user identity (username) of the currently logged in user on the host.
Note that when a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user. In addition, when a non-authoritative user is the current user on a host, that user still cannot be used for user control.
The user-assigned importance of a host to your enterprise. You can use the host criticality in correlation rules and policies to tailor policy violations and their responses to the importance of a host involved in an event. You can assign a host criticality of low, medium, high, or none.
Information about the host that you want other analysts to view.
The value of the user-defined host attribute. The host attributes table contains a field for each user-defined host attribute.
The domain associated with the host. This field is only present if you have ever configured the management center for multitenancy.
The number of events that match the information that appears in each row. Note that the Count field appears only after you apply a constraint that creates two or more identical rows.
You can configure predefined and user-defined host attributes from a host workflow.
|
Step 1 |
In a host workflow, check the check boxes next to the hosts to which you want to add a host attribute.
|
||
|
Step 2 |
At the bottom of the page, click Set Attributes. |
||
|
Step 3 |
Optionally, set the host criticality for the hosts you selected. You can choose None, Low, Medium, or High. |
||
|
Step 4 |
Optionally, add notes to the host profiles of the hosts you selected in the text box. |
||
|
Step 5 |
Optionally, set any user-defined host attributes you have configured. |
||
|
Step 6 |
Click Save. |
The system correlates various types of data (intrusion events, Security Intelligence, connection events, and file or malware events) to determine whether a host on your monitored network is likely to be compromised by malicious means. Certain combinations and frequencies of event data trigger indications of compromise (IOC) tags on affected hosts. The IP addresses of these hosts appear in event views with a Red Compromised Host icon .
When a host is identified as potentially compromised, the user associated with that compromise is also tagged. These users appear in event views with a Red User icon.
If a file containing malware is seen again within 300 seconds of being tagged as an IOC, another IOC is not generated. If the same file is seen more than 300 seconds later, a new IOC will be generated.
To configure the system to tag events as indications of compromise, see Enabling Indications of Compromise Rules in the Cisco Secure Firewall Management Center Device Configuration Guide.
You can use the management center to view tables showing Indications of Compromise (IOC). Manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see depends on the workflow you use. The predefined IOC workflows terminate in a profile view, which contains a host or user profile for every host or user that meets your constraints. You can also create a custom workflow that displays only the information that matches your specific needs.
For your system to detect and tag indications of compromise (IOC), you must activate the IOC feature in the network discovery policy and enable at least one IOC rule. See Enabling Indications of Compromise Rules in the Cisco Secure Firewall Management Center Device Configuration Guide.
Users must be identified in an active Identity policy.
|
Step 1 |
Determine which location in the web interface presents information that meets your needs. You can use the following locations to view or work with Indication of Compromise data:
|
||||||
|
Step 2 |
If applicable, do one of the following and use the rest of the steps in this procedure:
|
||||||
|
Step 3 |
You have the following options:
|
The following are the fields in Host or User IOC (indication of compromise) tables. Not every IOC-related table includes all fields.
The IP address associated with the host that triggered the IOC.
The username, realm, and authentication source of the user associated with the event that triggered the IOC.
Brief description of the type of compromise indicated, such as Malware Executed or Impact 1 Attack.
Identifier associated with a specific IOC, referring to the event that triggered it.
Description of the impact on the potentially compromised host, such as This host may be under remote control or Malware has been executed on this host.
The first/most recent date and time that events triggering the IOC occurred.
The domain of the host that triggered the IOC. This field is only present if you have ever configured the management center for multitenancy.
When enabled in a network discovery policy, indication of compromise rules apply to all hosts in the monitored network and to authoritative users that are associated with IOC events on that network. You can disable a rule for an individual host or user to avoid unhelpful IOC tags (for example, you may not want to see IOC tags for a DNS server.) If a rule is disabled in the applicable network discovery policy, it cannot be enabled for a specific host or user. Disabling a rule for a particular host does not affect tagging for the user involved in the same event, and vice-versa.
|
Step 1 |
Navigate to the Indications of Compromise section of a host or user profile. |
|
Step 2 |
Click Edit Rule States. |
|
Step 3 |
In the Enabled column for a rule, click the slider to enable or disable it. |
|
Step 4 |
Click Save. |
You can use the Indications of Compromise section of the host profile and the user profile to navigate quickly to the events that triggered the IOC tags. Analyzing these events can give you the information you need to determine what, and whether, action is required to address threats of compromise.
Clicking View (
) next to the timestamp of an IOC tag navigates to the table view of events for the relevant event type, constrained to show
only the event that triggered the IOC tag.
Only the first instance of a User IOC is displayed in the management center. Subsequent instances are caught by the DNS Server."
|
Step 1 |
In a host or user profile, navigate to the Indications of Compromise section. |
|
Step 2 |
Click View ( |
After you have analyzed and addressed the threats indicated by an indication of compromise (IOC) tag, or if you determine that an IOC tag represents a false positive, you can mark an event resolved. Marking an event resolved removes it from the host profile and the user profile; when all active IOC tags on a profile are resolved, the Compromised Host or a user is associated with an indication of compromise Red User icon no longer appears. You can still view the IOC-triggering events for the resolved IOC.
If the events that triggered the IOC tag recur, the tag is set again unless you have disabled the IOC rule for the host or user.
|
Step 1 |
In a host or user profile, navigate to the Indications of Compromise section. |
|
Step 2 |
You have two choices:
|
The system collects information about all servers running on hosts on monitored network segments. This information includes:
the name of the server
the application and network protocols used by the server
the vendor and version of the server
the IP address associated with the host running a server
the port on which the server communicates
When the system detects a server, it generates a discovery event unless the associated host has already reached its maximum number of servers. You can use the management center web interface to view, search, and delete server events.
You can also base correlation rules on server events. For example, you could trigger a correlation rule when the system detects a chat server, such as ircd, running on one of your hosts.
The system can add hosts to the network map from exported NetFlow records, but the available information for these hosts is limited; see Differences between NetFlow and Managed Device Data.
You can use the management center to view a table of detected servers. Then, you can manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access servers differs depending on the workflow you use. All the predefined workflows terminate in a host view, which contains a host profile for every host that meets your constraints. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the server data:
|
|
Step 2 |
You have the following options:
|
Descriptions of the fields that can be viewed and searched in the servers table follow below.
The date and time the server was last used on the network or the date and time that the server was originally updated using the host input feature. The Last Used value is updated at least as often as the update interval you configured in the network discovery policy, as well as when the system detects a server information update.
The IP address associated with the host running the server.
The port where the server is running.
The network or transport protocol used by the server.
One of the following:
the name of the application protocol for the server
pending if the system cannot positively or negatively
identify the server for one of several reasons
unknown if the system cannot identify the server based
on known server fingerprints or if the server was added through host input and
did not include the application protocol
The categories, tags, risk level, and business relevance assigned to the application protocol. These filters can be used to focus on a specific set of data.
One of the following:
the server vendor as identified by the system, Nmap or another active source, or that you specified using the host input feature
blank, if the system cannot identify its vendor based on known server fingerprints, or if the server was added to the network map using NetFlow data
One of the following:
the server version as identified by the system, Nmap or another active source, or that you specified using the host input feature
blank, if the system cannot identify its version based on known server fingerprints, or if the server was added to the network map using NetFlow data
The web application based on the payload content detected by the
system in the HTTP traffic. Note that if the system detects an application
protocol of
HTTP but cannot detect a specific web application, the
system supplies a generic web browsing designation.
The categories, tags, risk level, and business relevance assigned to the web application. These filters can be used to focus on a specific set of data.
The number of times the server was accessed. For servers added using the host input feature, this value is always 0.
One of the following values:
User: user_name
Application: app_name
Scanner: scanner_type (Nmap or scanner added through network discovery configuration)
Firepower,
Firepower Port Match, or
Firepower Pattern Match for servers detected by the
system
NetFlow for servers added using NetFlow data
The domain of the host running the server. This field is only present if you have ever configured the management center for multitenancy.
Either the managed device that detected the traffic or the device that processed NetFlow or host input data.
The user identity (username) of the currently logged in user on the host.
When a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user. In addition, when a non-authoritative user is the current user on a host, that user still cannot be used for user control.
The number of events that match the information that appears in each row. This field appears only after you apply a constraint that creates two or more identical rows.
When a monitored host connects to another host, the system can, in many cases, determine what application was used. The system detects the use of many email, instant messaging, peer-to-peer, web applications, as well as other types of applications.
For each detected application, the system logs the IP address that used the application, the product, the version, and the number of times its use was detected. You can use the web interface to view, search, and delete application events. You can also update application data on a host or hosts using the host input feature.
If you know which applications are running on which hosts, you can use that knowledge to create host profile qualifications, which constrain the data you collect while building a traffic profile, and also can limit the conditions under which you want to trigger a correlation rule. You can also base correlation rules on the detection of application. For example, if you want your employees to use a specific mail client, you could trigger a correlation rule when the system detects a different mail client running on one of your hosts.
You can obtain the latest information about application detectors by carefully reading both the release notes for each system update and advisories for each VDB update.
To collect and store application data for analysis, make sure that you enable application detection in your network discovery policy.
You can use the management center to view a table of detected applications. Then, you can manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access applications differs depending on the workflow you use. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the application data:
|
|
Step 2 |
You have the following options:
|
When the system detects traffic for a known client, application protocol, or web application, it logs information about the application and the host running it.
Descriptions of the fields that can be viewed and searched in the applications table follow.
The name of the detected application.
The IP address associated with the host using the application.
The type of application:
Represents communications between hosts.
Represents software running on a host.
Represents the content or requested URL for HTTP traffic.
A general classification for the application that describes its most essential function. Each application belongs to at least one category.
Additional information about the application. Applications can have any number of tags, including none.
How likely the application is to be used for purposes that might be against your organization’s security policy. An application’s risk can range from Very Low to Very High.
Of Application Protocol Risk, Client Risk, and Web Application Risk, the highest of the three detected, when available, in the traffic that triggered the intrusion event.
The likelihood that the application is used within the context of your organization’s business operations, as opposed to recreationally. An application’s business relevance can range from Very Low to Very High.
Of Application Protocol Business Relevance, Client Business Relevance, and Web Application Business Relevance, the lowest of the three detected, when available, in the traffic that triggered the intrusion event.
The user identity (username) of the currently logged in user on the host.
Note that when a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user. In addition, when a non-authoritative user is the current user on a host, that user still cannot be used for user control.
The domain of the host using the application. This field is only present if you have ever configured the management center for multitenancy.
The number of events that match the information that appears in each row. Note that the Count field appears only after you apply a constraint that creates two or more identical rows.
You can use the management center to view a table of detected application details. Then, you can manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access application details differs depending on the workflow you use. There are two predefined workflows. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the application details data:
|
|
Step 2 |
You have the following options:
|
When the system detects traffic for a known client, application protocol, or web application, it logs information about the application and the host running it.
Descriptions of the fields that can be viewed and searched in the application details table follow.
The time that the application was last used or the time that the application data was updated using the host input feature. The Last Used value is updated at least as often as the update interval you configured in the network discovery policy, as well as when the system detects an application information update.
The IP address associated with the host using the application.
The name of the application. Note that if the system detected an application protocol but could not detect a specific client, client is appended to the application protocol name to provide a generic name.
The version of the application.
The categories, tags, risk level, and business relevance assigned to the application. These filters can be used to focus on a specific set of data.
The application protocol used by the application. Note that if the system detected an application protocol but could not detect a specific client, client is appended to the application protocol name to provide a generic name.
The web application based on the payload content or URL detected by the system in the HTTP traffic. Note that if the system detects an application protocol of HTTP but cannot detect a specific web application, the system supplies a generic web browsing designation here.
The number of times the system detected the application in use. For applications added using the host input feature, this value is always 0.
The domain of the host using the application. This field is only present if you have ever configured the management center for multitenancy.
The device that generated the discovery event containing the application detail.
The user identity (username) of the currently logged in user on the host.
Note that when a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user. In addition, when a non-authoritative user is the current user on a host, that user still cannot be used for user control.
The number of events that match the information that appears in each row. Note that the Count field appears only after you apply a constraint that creates two or more identical rows.
The system includes its own vulnerability tracking database which is used, in conjunction with the system’s fingerprinting capability, to identify the vulnerabilities associated with the hosts on your network. The operating systems, servers, and clients running on your hosts have different sets of associated vulnerabilities.
You can use the management center to:
Track and review the vulnerabilities for each host.
Deactivate vulnerabilities for a host after you patch the host or otherwise judge it immune to a vulnerability.
Vulnerabilities for vendorless and versionless servers are not mapped unless the applications protocols used by the servers are mapped in the management center configuration. Vulnerabilities for vendorless and versionless clients cannot be mapped.
Except as noted, these fields appear on all pages under Analysis > Hosts > Vulnerabilities.
The number of events that match the information that appears in each row. Note that the Count field appears only after you apply a constraint that creates two or more identical rows.
The identification number associated with the vulnerability in MITRE’s Common Vulnerabilities and Exposures (CVE) database (https://cve.mitre.org/).
To view details about this vulnerability in the National Vulnerability Database (NVD), right-click the CVE ID and choose View description in NVD.
The date the vulnerability was published.
A brief description of the vulnerability, from the National Vulnerability Database (NVD).
For the complete description, right-click the CVE ID and choose View description in NVD to view details in the National Vulnerability Database (NVD).
See "Vulnerability Impact" (below.)
This field is available only on the Vulnerability Details page.
Use the drop-down list to enable or disable a vulnerability. The management center ignores disabled vulnerabilities in its impact correlations.
The setting you specify here determines how the vulnerability is treated on a system-wide basis and is not limited to the host profile where you select the value.
Indicates whether the vulnerability is remotely exploitable
(TRUE/FALSE).
The base score and Common Vulnerability Scoring System score (CVSS) from the National Vulnerability Database (NVD).
The identification number associated with the vulnerability in the Snort ID (SID) database. That is, if an intrusion rule can detect network traffic that exploits a particular vulnerability, that vulnerability is associated with the intrusion rule’s SID.
Note that a vulnerability can be associated with more than one SID (or no SIDs at all). If a vulnerability is associated with more than one SID, the vulnerabilities table includes a row for each SID.
The vulnerability identification number that the system uses to track vulnerabilities.
To view details for this vulnerability, click View ().
The severity of the vulnerability on a scale of 0 to 10, with 10 being the most severe.
Deactivating a vulnerability prevents the system from using that vulnerability to evaluate intrusion impact correlations. You can deactivate a vulnerability after you patch the hosts on your network or otherwise judge them immune. Note that if the system discovers a new host that is affected by that vulnerability, the vulnerability is considered valid (and is not automatically deactivated) for that host.
Deactivating a vulnerability within a vulnerabilities workflow that is not constrained by IP addresses deactivates the vulnerability for all detected hosts on your network. You can deactivate vulnerabilities within the vulnerabilities workflow only on:
the second page of the default vulnerabilities workflow, Vulnerabilities on the Network, which shows only the vulnerabilities that apply to the hosts on your network
a page in a vulnerabilities workflow, custom or predefined, that you constrained based on IP address using a search.
You can deactivate a vulnerability for a single host using the network map, using the host’s host profile, or by constraining the vulnerabilities workflow based on the IP addresses of the host or hosts for which you want to deactivate vulnerabilities. For hosts with multiple associated IP addresses, this function applies only to the single, selected IP address of that host.
In a multidomain deployment, deactivating a vulnerability in an ancestor domain deactivates it in all descendant domains. Leaf domains can activate or deactivate a vulnerability for their devices if the vulnerability is activated in the ancestor domain.
You can use the management center to view a table of vulnerabilities. Then, you can manipulate the event view depending on the information you are looking for.
The page you see when you access vulnerabilities differs depending on the workflow you use. You can use the predefined workflow, which includes a table view of vulnerabilities. The table view contains a row for each vulnerability in the database, regardless of whether any of your detected hosts exhibit the vulnerabilities. The second page of the predefined workflow contains a row for each vulnerability (that you have not deactivated) that applies to detected hosts on your network. The predefined workflow terminates in a vulnerability detail view, which contains a detailed description for every vulnerability that meets your constraints.
 Tip |
If you want to see the vulnerabilities that apply to a single host or set of hosts, perform a search for vulnerabilities, specifying an IP address or range of IP addresses for the hosts. |
You can also create a custom workflow that displays only the information that matches your specific needs.
The table of vulnerabilities is not restricted by domain in a multidomain deployment.
|
Step 1 |
Access the table of vulnerabilities:
|
|
Step 2 |
You have the following options:
|
|
You can view vulnerability details in any of the following ways:
|
Deactivating a vulnerability within a vulnerabilities workflow that is not constrained by IP addresses deactivates the vulnerability for all detected hosts on your network.
In a multidomain deployment, deactivating a vulnerability in an ancestor domain deactivates it in all descendant domains. Leaf domains can activate or deactivate a vulnerability for their devices so long as the vulnerability is activated in the ancestor domain.
|
Step 1 |
Access the table of vulnerabilities:
|
|
Step 2 |
Click Vulnerabilities on the Network. |
|
Step 3 |
Check the check boxes next to vulnerabilities you want to deactivate. |
|
Step 4 |
Click Review at the bottom of the page. |
The system includes its own vulnerability tracking database which is used, in conjunction with the system’s fingerprinting capability, to identify the vulnerabilities associated with the hosts on your network.
You can augment the system's vulnerability data with imported network map data from third-party applications. To do so, your organization must be able to write scripts or create command line import files to import the data. For more information, see the Firepower System Host Input API Guide.
To include imported data in impact correlations, you must map third-party vulnerability information to the operating system and application definitions in the database. You cannot map third-party vulnerability information to client definitions.
After you use the host input feature to import third-party vulnerability data, you can use the management center to view a table of third-party vulnerabilities. Then, you can manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access third-party vulnerabilities differs depending on the workflow you use. There are two predefined workflows. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the third-party vulnerabilities data:
|
|
Step 2 |
You have the following options:
|
Descriptions of the fields that can be viewed and searched in the third-party vulnerabilities table follow.
The source of the third-party vulnerabilities, for example, QualysGuard or NeXpose.
The ID number associated with the vulnerability for its source.
The IP address associated with the host affected by the vulnerability.
A port number, if the vulnerability is associated with a server running on a specific port.
The identification number associated with the vulnerability in the Bugtraq database. (http://www.securityfocus.com/bid/)
The identification number associated with the vulnerability in MITRE’s Common Vulnerabilities and Exposures (CVE) database (https://cve.mitre.org/).
The legacy vulnerability identification number that the system uses to track vulnerabilities
Click View () to access the vulnerability details for the SVID.
The identification number associated with the vulnerability in the Snort ID (SID) database. That is, if an intrusion rule can detect network traffic that exploits a particular vulnerability, that vulnerability is associated with the intrusion rule’s SID.
Note that a vulnerability can be associated with more than one SID (or no SIDs at all). If a vulnerability is associated with more than one SID, the vulnerabilities table includes a row for each SID.
The title of the vulnerability.
A brief description of the vulnerability.
The domain of the host with the vulnerability. This field is only present if you have ever configured the management center for multitenancy.
The number of events that match the information that appears in each row. Note that the Count field appears only after you apply a constraint that creates two or more identical rows.
Identity sources collect active session data, user data, and user activity data. The data is displayed in individual user-related workflows:
Active Sessions — this workflow displays all current user sessions on your network. A single user running several simultaneous active sessions would occupy several rows in this table. For more information about the types of user data displayed in this workflow, see Active Sessions Data.
Users — this workflow displays all users seen on your network. A single user occupies a single row in this table. For more information about the types of user data displayed in this workflow, see User Data.
User Activity — this workflow displays all user activity seen on your network. A single user with more than one instance of user activity would occupy several rows in this table. For more information about the types of user activity displayed in this workflow, see User Activity Data.
For more information about the user identity sources that populate these workflows, see the Cisco Secure Firewall Management Center Device Configuration Guide.
User-related data is displayed in the active sessions, users, and user activity tables.
Note |
Active sessions for Azure AD realm users are displayed only in the Active Sessions new UI layout and not in the legacy UI. |
|
Field |
Description |
Active Sessions Table |
Users Table |
User Activity Table |
||
|---|---|---|---|---|---|---|
|
Active Session Count |
The number of active sessions associated with the user. |
No |
Yes |
No |
||
|
Authentication Type |
The type of authentication: No Authentication, Passive Authentication, Active Authentication, Guest Authentication, Failed Authentication, or VPN Authentication. For more information about the supported identity sources for each Authentication Type, see the Cisco Secure Firewall Management Center Device Configuration Guide. |
Yes |
No |
Yes |
||
|
Available for Policy |
A value of Yes means the user was retrieved from the user store (for example, Active Directory). ) A value of No means the management center received a report of a login for that user but the user is not in the user store. One way this can happen is if a user in an excluded group logs in to the user store. You can exclude groups from being downloaded when you configure a realm. Users not available for policy are recorded in the management center but are not sent to managed devices. |
No |
Yes |
No |
||
|
Count |
Depending on the table, the number of sessions, users, or activity events that match the information that appears in a particular row. |
Yes |
Yes |
Yes |
||
|
Current IP |
(See also Current IP/Domain and IP address.) The IP address associated with the host that the user is logged into. This field is blank in the Users table if there are no active sessions for a user. |
Yes |
No |
No |
||
|
Department |
The user’s department, as obtained by a realm. If there is no department explicitly associated with the user on your servers, the department is listed as whatever default group the server assigns. For example, on Active Directory, this is Users (ad). This field is blank if:
|
Yes |
Yes |
No |
||
|
Description |
More information, if available, about the session, user, or user activity. |
No |
No |
Yes |
||
|
Device |
For user activity detected by traffic-based detection or an active authentication identity source, the name of the device that identified the user. For other types of user activity, the managing management center.
|
Yes |
No |
Yes |
||
|
Discovery Application |
The application or protocol used to detect the user.
|
Yes |
Yes |
Yes |
||
|
Current IP Domain/Domain |
In the Active Sessions table, the multitenancy domain where the user activity was detected. In the Users table, the multitenancy domain associated with the user's realm. In the User Activity table, the multitenancy domain where the user activity was detected. This field is only present if you have ever configured the management center for multitenancy. |
Yes |
Yes |
Yes |
||
|
|
The user’s email address. This field is blank if:
|
Yes |
Yes (as E-Mail) |
No |
||
|
End Port |
If the user was reported by the TS Agent and their session is currently active, this field identifies the end value for the port range assigned to the user. This field is blank if the user's TS Agent session is inactive or if the user was reported by another identity source. |
No |
No |
Yes |
||
|
Endpoint Location |
The IP address of the network device that used ISE to authenticate the user, as identified by ISE. If you do not configure ISE, this field is blank. |
No |
No |
Yes |
||
|
Endpoint Profile |
The user's endpoint device type, as identified by Cisco ISE. If you do not configure ISE, this field is blank. |
No |
No |
Yes |
||
|
Event |
The user activity event type. |
No |
No |
Yes |
||
|
First Name |
The user’s first name, as obtained by a realm. This field is blank if:
|
Yes |
Yes |
No |
||
|
IP Address |
For User Login user activity, the IP address or internal IP address involved in the login:
(See also Current IP and Current IP/Domain.) An associated IP address does not mean the user is the current user for that IP address; when a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user. For other types of user activity, this field is blank. |
No |
No |
Yes |
||
|
Last Name |
The user’s last name, as obtained by a realm. This field is blank if:
|
Yes |
Yes |
No |
||
|
Last Seen |
The date and time that a session was last initiated (or user data was updated) for the user. |
Yes |
Yes |
No |
||
|
Login Time |
The date and time that the session was initiated for the user. |
Yes |
No |
No |
||
|
Phone Number |
The user’s telephone number, as obtained by a realm. This field is blank if:
|
Yes (as Phone) |
Yes |
No |
||
|
Realm |
The identity realm associated with the user. |
Yes |
Yes |
Yes |
||
|
Security Group Tag |
The Security Group Tag (SGT) attribute applied by Cisco TrustSec as the packet entered a trusted TrustSec network. If you do not configure ISE, this field is blank. |
No |
No |
Yes |
||
|
Session Duration |
The duration of the user session, calculated from the Login Time and the current time. |
Yes |
No |
No |
||
|
Start Port |
If the user was reported by the TS Agent and their session is currently active, this field identifies the start value for the port range assigned to the user. This field is blank if the user's TS Agent session is inactive or if the user was reported by another identity source. |
No |
No |
Yes |
||
|
Time |
The time that the system detected the user activity. |
No |
No |
Yes |
||
|
User |
At minimum, this field displays the user's realm and username. For example, Lobby\jsmith, where Lobby is the realm and jsmith is the username. If a realm downloads additional user data from an LDAP server and the system associates it with a user, this field also displays the user's first name, last name, and type. For example, John Smith (Lobby\jsmith, LDAP), where John Smith is the user's name and LDAP is the type.
|
Yes |
Yes |
No |
||
|
Username |
The username associated with the user. |
Yes |
Yes |
Yes |
||
|
VPN Bytes In |
For Remote Access VPN-reported user activity, the total number of bytes received from the remote peer or client by the threat defense.
For other types of user activity, this field is blank. |
Yes |
No |
Yes |
||
|
VPN Bytes Out |
For Remote Access VPN-reported user activity, the total number of bytes transmitted to the remote peer or client by the threat defense.
For other types of user activity, this field is blank. |
No |
No |
Yes |
||
|
VPN Client Application |
For Remote Access VPN-reported user activity, the remote user's AnyConnect Remote Access VPN application. For other types of user activity, this field is blank. |
Yes |
No |
Yes |
||
|
VPN Client Country |
For Remote Access VPN-reported user activity, the country name as reported by the AnyConnect Client VPN. For other types of user activity, this field is blank. |
No |
No |
Yes |
||
|
VPN Client OS |
For Remote Access VPN-reported user activity, the remote user's endpoint operating system as reported by the AnyConnect Client VPN. For other types of user activity, this field is blank. |
Yes |
No |
Yes |
||
|
VPN Client Public IP |
For Remote Access VPN-reported user activity, the publicly routable IP address of the AnyConnect Client VPN device. For other types of user activity, this field is blank. |
Yes |
No |
Yes |
||
|
VPN Connection Duration |
For Remote Access VPN-reported user activity, the total time (HH:MM:SS) that the session was active. For other types of user activity, this field is blank. |
No |
No |
Yes |
||
|
VPN Connection Profile |
For Remote Access VPN-reported user activity, the name of the connection profile (tunnel group) used by the VPN session. Connection profiles are part of a Remote Access VPN Policy. For other types of user activity, this field is blank. |
Yes |
No |
Yes |
||
|
VPN Group Policy |
For Remote Access VPN-reported user activity, the name of the group policy assigned to the client when the VPN session is established; either the statically-assigned group policy associated with the VPN Connection Profile, or the dynamically-assigned group policy if RADIUS is used for authentication. If assigned by the RADIUS server, this group policy overrides the static policy configured for the VPN Connection Profile. Group policies configure common attributes for groups of users in Remote Access VPN policies. For other types of user activity, this field is blank. |
Yes |
No |
Yes |
||
|
VPN Session Type |
For Remote Access VPN-reported user activity, the type of session: LAN-to-LAN or Remote. For other types of user activity, this field is blank. |
Yes |
No |
Yes |
The workflow displays select information about current user sessions. When a user on your network runs several sessions simultaneously, the system can uniquely identify the sessions if:
they have unique IP Address values.
they have unique Start Port and End Port values, as provided by the Cisco Terminal Services (TS) Agent.
they have unique Current IP Domain values.
they were authenticated by different identity sources.
they were associated with different identity realms.
For more information about the user and user activity data stored by the system, see User Data and User Activity Data.
For information about general user-related event troubleshooting and Remote Access VPN Troubleshooting, see the Troubleshoot Realms and User Downloads and VPN Troubleshooting in the Cisco Secure Firewall Management Center Device Configuration Guide.
You can view a table of active sessions, and then manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access users differs depending on the workflow you use. You can use the predefined workflow, which includes a table view of users that lists all detected users, and terminates in a user details page. The user details page provides information on every user that meets your constraints.
|
Step 1 |
Access the users data:
|
|
Step 2 |
You have the following options:
|
When an identity source reports a user login for a user who is not already in the database, the user is added to the database, unless you have specifically restricted that login type.
The system updates the users database when one of the following occurs:
A user on the management center manually deletes a non-authoritative user from the Users table.
An identity source reports a logoff by that user.
A realm ends the user session as specified by the realm's User Session Timeout: Authenticated Users, User Session Timeout: Failed Authentication Users, or User Session Timeout: Guest Users setting.
Note |
If you have ISE/ISE-PIC configured, you may see host data in the users table. Because host detection by ISE/ISE-PIC is not fully supported, you cannot perform user control using ISE-reported host data. |
The type of user login that the system detected determines what information is stored about the new user.
|
Identity Source |
Login Type |
User Data Stored |
|---|---|---|
|
ISE/ISE-PIC |
Active Directory LDAP RADIUS RSA |
|
|
TS Agent |
Active Directory |
|
|
captive portal |
Active Directory LDAP |
|
|
traffic-based detection |
LDAP AIM Oracle SIP HTTP FTP MDNS |
|
|
POP3 IMAP |
|
If you configure a realm to automatically download users, the management center queries the servers based on the interval you specified. It may take five to ten minutes for the management center database to update with user metadata after the system detects a new user login. The management center obtains the following information and metadata about each user:
username
first and last names
email address
department
telephone number
current IP address
Security Group Tag (SGT), if available
endpoint profile, if available
endpoint location, if available
start port, if available
end port, if available
The number of users the management center can store in its database depends on your management center model. When a non-authoritative user login to a host is detected, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user login is detected for that host, only another authoritative user login changes the current user.
Note that traffic-based detection of AIM, Oracle, and SIP logins create duplicate user records because they are not associated with any of the user metadata that the system obtains from LDAP servers. To prevent overuse of user count because of duplicate user records from these protocols, configure traffic-based detection to ignore those protocols.
You can search, view, and delete users from the database; you can also purge all users from the database.
For information about general user-related event troubleshooting, see Cisco Secure Firewall Management Center Device Configuration Guide.
You can view a table of users, and then manipulate the event view depending on the information you are looking for.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
The page you see when you access users differs depending on the workflow you use. You can use the predefined workflow, which includes a table view of users that lists all detected users, and terminates in a user details page. The user details page provides information on every user that meets your constraints.
|
Step 1 |
Access the users data:
|
|
Step 2 |
You have the following options:
|
The system generates events that communicate the details of user activity on your network. When the system detects user activity, the user activity data is logged to the database. You can view, search, and delete user activity; you can also purge all user activity from the database.
The system logs a user activity event when a user is seen on your network for the first time. Subsequent appearances by that user do not log new user activity events. However, if the user's IP address changes, the system logs a new user activity event.
The system also correlates user activity with other types of events. For example, intrusion events can tell you the users who were logged into the source and destination hosts at the time of the event. This correlation can tell you who was logged into the host that was targeted by an attack, or who initiated an internal attack or portscan.
You can also use user activity in correlation rules. Based on the type of user activity as well as other criteria that you specify, you can build correlation rules that, when used in a correlation policy, launch remediations and alert responses when network traffic meets your criteria.
Note |
If you have ISE/ISE-PIC configured, you may see host data in the users table. Because host detection by ISE/ISE-PIC is not fully supported, you cannot perform user control using ISE-reported host data. |
Descriptions of the four types of user activity data follow.
This type of event is generated when the system detects a login by an unknown user that is not in the database.
The system logs a user activity event when a user is seen on your network for the first time. Subsequent appearances by that user do not log new user activity events. However, if the user's IP address changes, the system logs a new user activity event.
This type of event is generated when any of the following occur:
Captive portal performs a successful or failed user authentication.
Traffic-based detection detects a successful or failed user login.
Note |
SMTP logins detected by traffic-based detection are not recorded unless there is already a user with a matching email address in the database. |
When a non-authoritative user logs into a host, that login is recorded in the user and host history. If no authoritative user is associated with the host, a non-authoritative user can be the current user for the host. However, after an authoritative user logs into the host, only a login by another authoritative user changes the current user.
If you are using captive portal or traffic-based detection, note the following about failed user login and failed user authentication data:
Failed logins reported by traffic-based detection (LDAP, IMAP, FTP, and POP3 traffic) are displayed in the table view of user activity, but not in the table view of users. If a known user failed to log in, the system identifies them by their username. If an unknown user failed to log in, the system uses Failed Authentication as their username.
Failed authentications reported by captive portal are displayed in both the table view of user activity and the table view of users. If a known user failed to authenticate, the system identifies them by their username. If an unknown user failed to authenticate, the system identifies them by the username they entered.
This type of event is generated when you manually delete a user from the database.
This type of event is generated when the system detects a user that is not in the database, but cannot add the user because you have reached the maximum number of users in the database as determined by your management center model.
After you reach the user limit, in most cases the system stops adding new users to the database. To add new users, you must either manually delete old or inactive users from the database, or purge all users from the database.
However, the system favors authoritative users. If you have reached the limit and the system detects a login for a previously undetected authoritative user, the system deletes the non-authoritative user who has remained inactive for the longest time, and replaces it with the new authoritative user.
The following user IOC changes are logged in the user activity database:
When indications of compromise are resolved.
When indication of compromise rules are enabled or disabled for users.
For information about general user-related event troubleshooting, see the Cisco Secure Firewall Management Center Device Configuration Guide.
In a multidomain deployment, you can view data for the current domain and for any descendant domains. You cannot view data from higher level or sibling domains.
You can view a table of user activity, and then manipulate the event view depending on the information you are looking for. The page you see when you access user activity differs depending on the workflow you use. You can use the predefined workflow, which includes the table view of user activity and terminates in a user details page, which contains user details for every user that meets your constraints. You can also create a custom workflow that displays only the information that matches your specific needs.
|
Step 1 |
Access the user activity data:
|
||
|
Step 2 |
You have the following options:
|
You can learn more about a specific user by viewing the User pop-up window. The page that appears, called the "User Profile" in this document, is titled "User Identity" in the web interface.
You can display the window from:
any event view that associates user data with other kinds of events
the table view of active sessions
the table view of users
User information also appears in the terminating page for users workflows.
The user data you see is the same as you would see in the table view of users.
Indications of Compromise Section
For information about this section, see:
Indications of Compromise in the Cisco Secure Firewall Management Center Device Configuration Guide
Editing Indication of Compromise Rule States for a Single Host or User
Host History Section
The host history provides a graphic representation of the last twenty-four hours of the user’s activity. A list of IP addresses of the hosts that the user logged into and logged off of approximates login and logout times with bar graphs. A typical user might log on to and off of multiple hosts in the course of a day. For example, periodic automated logins to a mail server would display as multiple short sessions, while longer logins (such as during working hours) display longer sessions.
If you use traffic-based detection or captive portal to capture failed logins, the host history also includes hosts where the user failed to log in.
The data used to generate the host history is stored in the user history database, which by default stores 10 million user login events. If you do not see any data in the host history for a particular user, either that user is inactive, or you may need to increase the database limit.
|
You have two options:
|
|
Feature |
Minimum Management Center |
Minimum Threat Defense |
Details |
|---|---|---|---|
|
Vulnerabilities pages changes |
6.7 |
Any |
Bugtraq and its vulnerability data are no longer available. The following changes have been made:
Modified screens:
Supported Platforms: management center |
Feedback