Cisco Nexus 7004 Switch Accessory Kit
This section describes the contents of the accessory kit that you can order for the Cisco Nexus 7004 switch. The accessory kit is shipped with each Cisco Nexus 7004 chassis. You use that kit for mounting the chassis on a four-post or two-post rack. Typically, you mount the front of the chassis using the front-mount brackets, which are already attached to the chassis, but if you need to mount the center of the chassis, you use the center-mount brackets (order part number N7K-C7004-RMK), which you must order separately. The kit also includes the screws, grounding lug, and other equipment that you use for all installations of this chassis.
Table 1 lists and illustrates the contents for this kit.
.
Illustration |
Description |
Quantity |
---|---|---|
Chassis mounting screws
|
10 10 |
|
RJ-45 rollover cable |
1 |
|
D B9F/RJ-45F PC terminal |
1 |
|
Ground lug kit (includes the following parts):
|
1 kit 1 per kit 2 per kit |
|
Cable ties, 8.5 inches |
1 kit (3 pieces) |
|
ESD wrist strap (disposable) |
1 |
|
Not applicable |
Hazardous substances list for customers in China |
1 |
Not applicable |
Cisco Information Packet 1-Year Limited Warranty for Hardware |
1 1 |
Not applicable |
GR-1089 Installation and Caution Instructions |
1 |
Note |
If you do not receive a part listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml. If you purchased this product through a Cisco reseller, you might receive additional contents in your kit, such as documentation, hardware, and power cables. |
The product shipment includes power cords for the following power supplies:
-
3-kW AC power supplies—one power cord per power supply
-
3-kW DC power supplies—no power cords supplied (you must supply a cable for 6 AWG and up to 45 A).
The shipped cables depend on your specification when placing a Cisco Nexus 7000 Series device order.
The available power cords for the 3-kW AC power supplies are as follows:
-
CAB-AC-16A-AUS—power cord, 250-VAC 16A, C19, Australia
-
CAB-AC16A-CH—power cord, 16-A, China
-
CAB-AC-2500W-EU—power cord, 250-VAC 16A, Europe
-
CAB-AC-2500W-INT—power cord, 250-VAC 16A, International
-
CAB-AC-2500W-ISRL—power cord, 250-VAC 16-A, Israel
-
CAB-9K16A-US1—power cord, 250-VAC 16A, Src Plug NEMA 6-20, US/Japan
-
CAB-AC-C6K-TWLK—power cord, 250-VAC 16A, twist lock, NEMA L6-20
-
CAB-7513AC—power cord, AC 110V North America
-
CAB-C19-CBN—cabinet jumper power cord, 250-VAC, 16A, C20C
-
CAB-ACS-16—power cord, 16-A, Switzerland
-
CAB-L520P-C19-US—NEMA L5-20 to IEC-C19 6ft US
The available AC power cords for the 3.5-kW HVAC/HVDC power supplies are as follows:
-
CAB-AC-16A-SG-AR—power cord, 250-VAC 16A, IRSM 2073Saf-D-Grid, Argentina
-
CAB-AC-16A-SG-AZ—power cord, 250-VAC 16A, AU20LS3/Saf-D-Grid, Australia and New Zealand
-
CAB-AC-16A-SG-BR—power cord, 250-VAC 16A, EL224/Saf-D-Grid, Brazil
-
CAB-AC-16A-SG-CH—power cord, 250-VAC 16A, GB 16C/Saf-D-Grid, China
-
CAB-AC-16A-SG-EU—power cord, 250-VAC 16A, CEE 7-7/Saf-D-Grid, Europe
-
CAB-AC-16A-SG-IN—power cord, 250-VAC 16A, IEC60309/Saf-D-Grid, International
-
CAB-AC-16A-SG-IND—power cord, 250-VAC 16A, SABS 164-1/Saf-D-Grid, India
-
CAB-AC-16A-SG-IS—power cord, 250-VAC 16A, SI 16S3/Saf-D-Grid, Israel
-
CAB-AC-16A-SG-IT—power cord, 250-VAC 16A, CEI 23-50/Saf-D-Grid to IEC-C19, Italy
-
CAB-AC-16A-SG-SA—power cord, 250-VAC 16A, EL/Saf-D-Grid, South Africa
-
CAB-AC-16A-SG-SK—power cord, 250-VAC 16A, Src/Saf-D-Grid, South Korea
-
CAB-AC-20A-SG-US—power cord, 110-VAC 20A, straight blade, NEMA 5-20P/Saf-D-Grid, North America
-
CAB-AC-20A-SG-US1—power cord, 125-VAC 20A, twist lock, NEMA L5-20/Saf-D-Grid, North America
-
CAB-AC-20A-SG-US2—power cord, 250-VAC 20A, straight-blade, NEMA 6-20/Saf-D-Grid
-
CAB-AC-20A-SG-US3—power cord, 250-VAC 20A, twist lock, NEMA L6-20/Saf-D-Grid
-
CAB-AC-20A-SG-US4—power cord, 277-VAC 20A, NEMA L7-20P/Saf-D-Grid, North America
-
CAB-AC-20A-SG-C20—cabinet jumper PDU power cord, 250-VAC, 20A, IEC C20/Saf-D-Grid, North America
-
CAB-AC-16A-SG-SW—power cord, 250-VAC 16A, SEV 5934-2/Saf-D-Grid, Switzerland
-
CAB-HV-25A-SG-US2—power cord, 300-VAC/500-VDC 20A, Ring Terminal/Saf-D-Grid, North America
-
CAB-HV-25A-SG-US5—power cord, 300-VAC 20A, Saf-D-Grid P-10/Saf-D-Grid P4, North America
-
CAB-HV-25A-SG-IN2—power cord, 300-VAC/500-VDC 20A, IEC/EU, Ring Terminal/Saf-D-Grid, International
-
CAB-HV-25A-SG-IN3—power cord, 300-VAC 20A, Saf-D-Grid P-10/Saf-D-Grid P4, IEC/EU, International
Note |
All cables will not be orderable at first customer shipment (FCS). |
The available DC power cords for the 3.5-kW HVAC/HVDC power supplies are as follows:
-
CAB-HV-25A-SG-US1—power cord, 400-VDC 20A, Saf-D-Grid/Saf-D-Grid, North America
-
CAB-HV-25A-SG-US2—power cord, 300-VAC/500-VDC 20A, Ring Terminal/Saf-D-Grid, North America
-
CAB-HV-25A-SG-IN1—power cord, 400-VDC 20A, IEC/EU, Saf-D-Grid/Saf-D-Grid, International
-
CAB-HV-25A-SG-IN2—power cord, 300-VAC/500-VDC 20A, IEC/EU, Ring Terminal/Saf-D-Grid, International
Note |
All cables will not be orderable at first customer shipment (FCS). |