The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
atomic inheritance, about 1-3
C
capability uplink command
new and changed information ii-iv
class-map limits A-1
community ports 5-2
configuration limits A-1
D
default command 2-14
description command 2-5, 4-4, 6-7
disabled state, about 2-1
documentation
additional publications iv-xiii
E
enabled state, about 2-1
enabling
port profiles 2-19
ports in the profile 2-9, 2-12
F
feature port-profile-role command 6-5
H
host ports 5-2
I
inheritance
removing a port profile 2-20
interface quarantine, about 1-3
isolated ports 5-2
L
limits, configuration A-1
M
MAC pinning
new and changed information ii-iv
mapping PVLANs 5-3
match criteria limit A-1
N
no port-profile command 2-20
no shutdown command 2-9, 2-12, 4-5
O
options, designating group as VMware 2-5
P
policy map limits A-1
port binding
default setting 2-15
information about 2-2
verify in vCenter 2-18
port-binding command 2-16, 2-17
port-profile command 2-4, 3-3, 6-7, 6-9
port-profile-role command 6-7, 6-10
port profiles
configuring as private VLAN 5-1
creating 2-4
enabling 2-18
mapping PVLANs 5-3
removing 2-20
type
new and changed information ii-iv
VLANs 2-7
VMware tag 2-5
ports, private vlan 5-2
private VLANs
promiscuous ports 5-2
PVLANs
configuring port profiles as 5-1
PVLAN-switchport association 5-3
Q
quarantine, about 1-3
R
ranges, VLANs 2-7
related documents iv-xiii, iv-xv
removing a port profile 2-20
rollback to consistent config, about 1-3
S
service policy limits A-1
show feature command 6-6
show port-profile command
new and changed information ii-v
show port-profile-role command 6-8, 6-10
show port-profile sync-status command 7-1
show port-profile virtual usage command 7-2
show running-config
new and changed information ii-iv
shutdown command 2-14
state
port profile, about 2-1
state enabled command 2-19
static pinning
new and changed information ii-iv
switchport mode command 2-12, 2-14
switchport mode private-vlan command 5-2
switchport private-vlan host-association command 5-3
switchport private-vlan mapping command 5-3
switchport-PVLAN association 5-3
switchport trunk allowed vlan, command 2-9, 2-10
system port profiles
information about 4-1
system vlan command 4-5
U
user command 6-8
V
vEthernet
port binding 2-2
VLAN ranges 2-7
VLANs, private
VMware, identifying in port group 2-5
vmware port-group command 2-6
vPC-HM
new and changed information ii-iv