show svs neighbors
|
Displays all neighbors.
|
show svs connections
|
Displays the
Cisco Nexus 1000V
connections.
|
show svs domain
|
Displays the domain configuration.
|
show port-profile name
name
|
Displays the configuration for a named port profile.
|
show running-config vlan
vlanID
|
Displays the VLAN information in the running configuration.
|
vem-health check
vsm_mac_address
|
Displays the cause of a connectivity problem and recommends
how to troubleshoot the problem.
|
show mac address-table interfac e
|
Displays the MAC address table on an upstream switch to
verify the network configuration.
|
module vem
module-number
execute vemcmd show l2
[control_vlan_id |
packet_vlan_id]
|
Displays the VLAN configuration on the VEM to verify that
the VSM MAC appears in the control and packet VLANs.
|
vem status
|
Displays the VEM status to confirm that the VEM agent is
running and the correct host uplinks are added to the DVS.
|
vemcmd show card
|
Displays information about cards on the VEM to verify that
the domain ID, control VLANs, and packet VLANs are configured correctly on the
host.
|
vemcmd show port
[port-ltl-number]
|
Displays configured information on the VEM to verify that
the VM NIC port that is supposed to carry the control VLAN and packet VLAN is
present.
Note
|
The output
*F/B The port is blocked on some of the
VLANs means that the trunk is not forwarding all VLANs. This might be
a normal situation depending on the port profile allowed VLAN list. Compare the
output of the
vemcmd show port vlans command
against the port profile trunk allowed VLANs. If the lists match, all of the
expected VLANs are forwarding and
Cisco Nexus 1000V
is blocking non-allowed VLANs.
|
|
vemcmd show bd
[control_vlan_id |
packet_vlan_id]
|
Displays configured information on the VEM to verify that
the VM NIC port that is supposed to carry the control VLAN and packet VLAN is
present.
|
vemcmd show trunk
|
Displays configured information on the VEM to verify that
the DV port groups are successfully pushed from vCenter Server to the host and
that the correct physical trunk port VM NIC is used.
|
vem-connect -i
ip_address
-v
vlan [-pnic
vmnicN]
|
Recovers management and control connectivity of a host when
a VSM is running on a VEM.
|
show module vem mapping
|
Displays information about the VEM that a VSM maps to,
including the VEM module number, status, UUID, and license status.
|
show system internal vem_mgr event-history
module
module-number
|
Displays module FSM event information.
|
show module internal event-history module
module-number
|
Displays the event log for a module.
|
show system internal im event-history
module
module-number
|
Displays the module IM event logs for the system.
|
system internal vmm event-history module
module-number
|
Displays the module VMM event logs for the system.
|
system internal ethpm event-history module
module-number
|
Displays the module Ethernet event logs for the system.
|
system internal ethpm event-history module
type slot
|
Displays the Ethernet interface logs for the system.
|