The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
callhome
Syntax Description
|
callhome |
Enter the callhome configuration mode |
callhome send configuration
Syntax Description
|
callhome |
callhome commands |
|
send |
send a command callhome message |
|
configuration |
configuration type |
callhome send diagnostic
Syntax Description
|
callhome |
callhome commands |
|
send |
send a command callhome message |
|
diagnostic |
dignostic command |
callhome send eem subject <s1> body <s2>
Syntax Description
|
callhome |
callhome commands |
|
send |
send a command callhome message |
|
eem |
eem action email |
|
subject |
action email subject |
|
body |
action email body |
|
s1 |
subject-text string |
|
s2 |
body-text string |
[ no | default ] capability additional-paths receive [ disable ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
default |
(Optional) Inherit values from a peer template |
|
capability |
Advertise capability to the peer |
|
additional-paths |
Additional paths capability |
|
receive |
Additional paths Receive capability |
|
disable |
(Optional) Do not advertise additional paths Receive capability |
[ no | default ] capability additional-paths send [ disable ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
default |
(Optional) Inherit values from a peer template |
|
capability |
Advertise capability to the peer |
|
additional-paths |
Additional paths capability |
|
send |
Additional paths Send capability |
|
disable |
(Optional) Do not advertise additional paths Send capability |
[ no | default ] capability suppress 4-byte-as
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
default |
(Optional) Inherit values from a peer template |
|
capability |
Capability |
|
suppress |
Suppress sending out capability |
|
4-byte-as |
Suppress 4-byte AS Capability |
[no] capture session <session-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
capture |
Enable packet capture on this filter for session |
|
session |
Session ID <1-48> for this session |
|
session-id |
Session ID <1-48> for this session |
carrier-delay { <sec_val> | msec <msec_val> } | no carrier-delay
Syntax Description
|
no |
Negate a command or set its defaults |
|
carrier-delay |
Specify delay for interface transitions |
|
sec_val |
Carrier Transitions delay seconds |
|
msec |
Carrier Transitions delay milliseconds |
|
msec_val |
Carrier Transitions delay milliseconds |
[no] cbts-member tunnel-te <tunnel-num>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cbts-member |
Member Tunnel |
|
tunnel-te |
Tunnel Interface |
|
tunnel-num |
Tunnel Interface number |
cd <uri0>
Syntax Description
|
cd |
Change current directory |
|
uri0 |
Enter the name of the directory |
cdp advertise { v1 | v2 } | no cdp advertise [ v1 | v2 ]
Syntax Description
|
no |
Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
advertise |
Highest CDP version supported on the switch |
|
v1 |
CDP Version 1 |
|
v2 |
CDP Version 2 |
[no] cdp enable
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP interface parameters |
|
enable |
Enable/disable CDP on the interface |
[no] cdp enable
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP interface parameters |
|
enable |
Enable/disable CDP on all interfaces |
[no] cdp format device-id { mac-address | serial-number | system-name }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
format |
Device ID format for CDP |
|
device-id |
Device ID format for CDP |
|
mac-address |
Mac-address of the Chassis |
|
serial-number |
Chassis Serial Number/OUI |
|
system-name |
System name/Fully Qualified Domain Name (Default) |
[no] cdp holdtime <i0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
holdtime |
CDP hold time advertised (in seconds) |
|
i0 |
CDP hold time advertised (in seconds) |
[no] cdp timer <i1>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
timer |
CDP refresh time interval (in seconds) |
|
i1 |
CDP refresh time interval (in seconds) |
cfs clear message-context name <cfs-dyn-app-name> session-id <i0>
Syntax Description
|
cfs |
CFS parameters |
|
clear |
clear message context |
|
message-context |
clear message context |
|
name |
clear message context for given application |
|
cfs-dyn-app-name |
Registered name of the local application |
|
session-id |
Seesion id of message context |
|
i0 |
Seesion id |
[no] cfs distribute
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
distribute |
Enable fabric wide distribution |
{ cfs eth cos <i0> | no cfs eth cos [ <i0> ] }
Syntax Description
|
no |
Negate a command or set its defaults |
|
eth |
ETH configurations |
|
cos |
Configure CFS Ethernet COS value |
|
i0 |
COS Value Range |
[no] cfs eth distribute
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
eth |
ETH configurations |
|
distribute |
Enable CFS distribution over Ethernet |
cfs internal { decrement-uncoord <i0> | decrement-unrestricted <i1> | increment-uncoord <i2> | increment-unrestricted <i3> | lock <i4> | unlock <i5> | latency-log-on | latency-log-off }
Syntax Description
|
cfs |
CFS parameters |
|
internal |
CFs internal database modification |
|
decrement-uncoord |
Decrement the number of uncoord distributions for the sap |
|
i0 |
SAP of the application to be locked |
|
decrement-unrestricted |
Decrement the number of unrestricted distributions for the sap |
|
i1 |
SAP of the application to be locked |
|
increment-uncoord |
Increment the number of uncoord distributions for the sap |
|
i2 |
SAP of the application to be locked |
|
increment-unrestricted |
Increment the number of unrestricted distributions for the sap |
|
i3 |
SAP of the application to be locked |
|
lock |
Lock and application instance. |
|
i4 |
SAP of the application to be locked |
|
unlock |
UnLock a application instance. |
|
i5 |
SAP of the application to be unlocked |
|
latency-log-on |
Enable latency logs |
|
latency-log-off |
Disable latency logs |
cfs internal cfsoe { sap <i0> { lmi <i1> | ami <i2> | emi <i3> | reorder <i4> | send_ack <i5> | drop_packet <i6> | iod_register <i7> } | reset { all | reassembly_q } }
Syntax Description
|
cfs |
CFS parameters |
|
internal |
CFs internal database modification |
|
cfsoe |
CFSoE IoD internal values |
|
sap |
SAP Number |
|
i0 |
SAP Number |
|
lmi |
Least msg-id value |
|
i1 |
Msg-id value |
|
ami |
Application msg-id value |
|
i2 |
Msg-id value |
|
emi |
Least msg-id value |
|
i3 |
Msg-id value |
|
reorder |
Reorder Set/Unset |
|
i4 |
Set(1)/Unset(0) |
|
send_ack |
Send/Dont Send Ack |
|
i5 |
Set(1)/Unset(0) |
|
drop_packet |
Drop/Dont Drop Packet |
|
i6 |
Set(1)/Unset(0) |
|
iod_register |
Register app for IOD |
|
i7 |
Set(1)/Unset(0) |
|
reset |
Reset globally |
|
all |
All values |
|
reassembly_q |
Set Reassembly Queue count to zero |
[no] cfs ipv4 { distribute | mcast-address <ip0> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
ipv4 |
IPv4 configurations |
|
distribute |
Enable CFS distribution over IPv4 |
|
mcast-address |
Configure IPv4 multicast address |
|
ip0 |
Admin scope [239.255/16, 239.192/16-239.251/16] |
[no] cfs ipv6 { distribute | mcast-address <ipv60> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
ipv6 |
IPv6 configurations |
|
distribute |
Enable CFS distribution over IPv6 |
|
mcast-address |
Configure IPv6 multicast address |
cfs merge all-fabrics name <cfs-dyn-app-name> [ vsan <i0> ]
Syntax Description
|
cfs |
CFS parameters |
|
merge |
Resolve the merge failures |
|
all-fabrics |
Fabric wide within the scope of the application |
|
name |
Application name |
|
cfs-dyn-app-name |
Registered name of the local application |
|
vsan |
(Optional) For logical applications only |
|
i0 |
(Optional) Vsan Id |
[no] cfs region <i0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
region |
Regions to limit the distribution scope of application(s) |
|
i0 |
Region Id |
change-password [ old-password <s1> new-password <s2> ]
Syntax Description
|
change-password |
Change your password |
|
old-password |
(Optional) Current password for the user |
|
s1 |
(Optional) Current password for the user (clear text) |
|
new-password |
(Optional) New password for the user |
|
s2 |
(Optional) New password for the user (clear text) |
checkpoint { [ <name> ] [ description <descr_str> ] | file <file_uri> }
Syntax Description
|
checkpoint |
Create configuration rollback checkpoint |
|
name |
(Optional) Checkpoint name |
|
file |
Create configuration rollback checkpoint to file |
|
file_uri |
Checkpoint file path |
|
description |
(Optional) checkpoint description for the given checkpoint |
|
descr_str |
(Optional) checkpoint description(can include spaces) |
[no] checkpoint <chkpoint_name>
Syntax Description
|
no |
Negate a command or set its defaults |
|
checkpoint |
Delete configuration rollback checkpoint |
|
chkpoint_name |
Checkpoint name |
[no] class-map [ type qos ] [ <any_or_all> ] <cmap-name>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
(Optional) Specify the type of this class-map |
|
qos |
(Optional) Qos class |
|
any_or_all |
(Optional) Enter match-any or match-all |
|
cmap-name |
class-map name |
[no] class-map type control-plane [ <opt_any_or_all> ] <cmap-name>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
control-plane |
Control-Plane |
|
opt_any_or_all |
(Optional) Enter match-any or match-all |
|
cmap-name |
Class-map name |
[no] class-map type network-qos [ match-any ] <cmap-name-nq>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
network-qos |
Network QoS class |
|
match-any |
(Optional) Match on any criteria |
|
cmap-name-nq |
class-map name |
[no] class-map type psp [ <any_or_all> ] { <cmap-name-plc> | { handle <ppf_id> } } [ sequence <seq_no> ] [ client <clienttype> <clientID> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
psp |
PSP class |
|
any_or_all |
(Optional) Enter match-any or match-all |
|
cmap-name-plc |
class-map name |
|
handle |
Handle |
|
ppf_id |
PPF ID |
|
sequence |
(Optional) sequence |
|
seq_no |
(Optional) Sequence number |
|
client |
(Optional) set client type |
|
clienttype |
(Optional) cli/onep |
|
clientID |
(Optional) client appID |
[no] class-map type queuing [ <any_or_all> ] { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
queuing |
Queuing class |
|
any_or_all |
(Optional) Enter match-any |
|
cmap-enum-name |
|
|
xxx |
xxx |
|
zzz |
zzz |
|
cmap-dce-name |
Queuing class-map name |
|
cmap-name-hque |
Hierarchical class-map name |
[no] class-map type queuing { <cmap-dce-name> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
queuing |
Queuing class |
|
cmap-dce-name |
Queuing class-map name |
class { <cmap-name> [ insert-before <cmap-name2> ] | class-default } | no class { <cmap-name> | class-default }
Syntax Description
|
no |
Negate a command or set its defaults |
|
class |
Attach class map to policy map |
|
cmap-name |
Class-map name |
|
insert-before |
(Optional) Insert this class before another class |
|
cmap-name2 |
(Optional) class map name before which insertion should happen |
|
class-default |
Use class default |
[no] class [ type qos ] <cmap-name> [ insert-before [ type qos1 ] <cmap-name2> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
type |
(Optional) Specify the type of class |
|
qos |
(Optional) Match on Qos class |
|
cmap-name |
class map name |
|
insert-before |
(Optional) Insert this class before another class |
|
qos1 |
(Optional) Insert before Qos class |
|
cmap-name2 |
(Optional) class map name |
[no] class __inline__ [ type psp ] <cmap-name-plc> [ insert-before <cmap-name2> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
__inline__ |
Inline Class |
|
type |
(Optional) Specify the type of class |
|
psp |
(Optional) Match on PSP class |
|
cmap-name-plc |
class map name |
|
insert-before |
(Optional) Insert this class before another class |
|
cmap-name2 |
(Optional) class map name |
[no] class class-default
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
class-default |
System default class matching otherwise unclassified packets |
[no] class type network-qos <cmap-name-nq>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Match on network-qos class-map |
|
type |
Specify the type of this class-map |
|
network-qos |
Network QoS policy |
|
cmap-name-nq |
Match class-map name |
[no] class type network-qos class-default
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Match on network-qos class-map |
|
type |
Specify the type of this class-map |
|
network-qos |
Network QoS policy |
|
class-default |
System default class matching otherwise not classified cos values |
[no] class type psp { <cmap-name-plc> | { handle1 <ppf_id1> } } [ insert-before { <cmap-name2> | { handle2 <ppf_id2> } } ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
type |
Specify the type of class |
|
psp |
Match on PSP class |
|
cmap-name-plc |
class map name |
|
handle1 |
Handle1 |
|
ppf_id1 |
PPF ID1 |
|
insert-before |
(Optional) Insert this class before another class |
|
cmap-name2 |
(Optional) class map name |
|
handle2 |
(Optional) Handle2 |
|
ppf_id2 |
(Optional) PPF ID2 |
[no] class type queuing { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> } [ insert-before type queuing1 yyy <xcmap-enum-name> ]
Syntax Description
|
xxx |
xxx |
|
yyy |
(Optional) yyy |
|
zzz |
zzz |
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
type |
Specify the type of class |
|
queuing |
Match on Queuing class |
|
cmap-enum-name |
|
|
cmap-dce-name |
Queuing class-map name |
|
cmap-name-hque |
Hierarchical class-map name |
|
insert-before |
(Optional) Insert this class before another class |
|
queuing1 |
(Optional) Insert before Queuing class |
|
xcmap-enum-name |
(Optional) |
clean ip bfd
Syntax Description
|
clean |
Clean internal datastructures |
|
ip |
IP related information |
|
bfd |
clean ip bfd datastructures |
clean ipv6 bfd
Syntax Description
|
clean |
Clean internal datastructures |
|
ipv6 |
IPV6 related information |
|
bfd |
clean ip bfd datastructures |
clear { ipv6 | ip } rip statistics [ * | <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
ip |
Clear IP commands |
|
rip |
Routing Information Protocol (RIP) |
|
statistics |
Clear RIP statistics |
|
* |
(Optional) RIP statistics for all interfaces |
|
interface |
(Optional) RIP interface |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear { { ip eigrp [ <eigrp-ptag> ] topology { { <address> <mask> } | { <prefix> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] topology { <ipv6-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
topology |
Clear IP-EIGRP topology table entry |
|
address |
Network to display information about |
|
mask |
Network mask |
|
prefix |
IP prefix <network>/<length>, e.g., 192.168.0.0/16 |
|
eigrp-ptag |
(Optional) |
clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] events [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
events |
Clear IP-EIGRP event logs |
clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] logging [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
logging |
Stop IP-EIGRP event logging |
clear { { ip eigrp [ <eigrp-ptag> ] neighbors { * | <address> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors { * | <ipv6-addr> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
neighbors |
Clear EIGRP neighbors |
|
* |
Clear all EIGRP neighbors |
|
address |
IP-EIGRP neighbor address |
|
interface |
Interface |
|
soft |
(Optional) Soft reset |
|
no-goodbye |
(Optional) No goodbye |
|
eigrp-ptag |
(Optional) |
clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] accounting [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
accounting |
Clear IP-EIGRP accounting statistics |
clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] traffic [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
traffic |
Clear IP-EIGRP traffic statistics |
clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] event-history [ fsm | packet | rib | cli | all ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
eigrp-ptag |
(Optional) Process tag |
|
event-history |
Clear the event history buffers |
|
fsm |
(Optional) FSM log of EIGRP |
|
packet |
(Optional) Packet log of EIGRP |
|
rib |
(Optional) RIB log of EIGRP |
|
cli |
(Optional) EIGRP CLI related events |
|
all |
(Optional) All event history buffers |
clear { ip | ipv6 } eigrp [ <eigrp-ptag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
eigrp-ptag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
redistribution |
Clear EIGRP redistributed information |
clear [ <ip_ipv6_mac> ] access-list counters [ <name> ]
Syntax Description
|
clear |
Reset functions |
|
ip_ipv6_mac |
(Optional) IP/IPv6/MAC |
|
access-list |
Clear access list statistical information |
|
counters |
Clear access list counters |
|
name |
(Optional) List name |
clear { keystore | sksd } [ <index> | <name> ]
Syntax Description
|
clear |
Reset functions |
|
keystore |
Clear all records in the keystore |
|
sksd |
Clear all records in the keystore/sksd-chip |
|
index |
(Optional) Clear secret at index <index> |
|
name |
(Optional) Clear secret with name <name> |
clear { { ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ipv6-addr> | <ipv6-prefix> } [ <nh-addr> <nh-interface> ] } } [ no-ufdm ]
Syntax Description
|
clear |
Reset functions |
|
route |
Clear routing information |
|
routing |
Clear routing information |
|
vrf |
(Optional) Clear per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
ipv6 |
Clear IPv6 commands |
|
unicast |
(Optional) Clear unicast information |
|
topology |
(Optional) Clear per-topology information |
|
topology-name |
(Optional) Topology name |
|
all |
Clear all routes |
|
nh-interface |
(Optional) Interface Name |
|
no-ufdm |
(Optional) Do not tell UFDM about the change |
clear { { ip route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ip-addr> | <ip-prefix> } [ <nh-addr> | <nh-addr-v6> ] [ <nh-interface> ] } } [ no-ufdm ]
Syntax Description
|
clear |
Reset functions |
|
route |
Clear routing information |
|
routing |
Clear routing information |
|
vrf |
(Optional) Clear per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
ip |
Clear IP commands |
|
ipv4 |
(Optional) Clear IP commands |
|
unicast |
(Optional) Clear unicast information |
|
topology |
(Optional) Clear per-topology information |
|
topology-name |
(Optional) Topology name |
|
all |
Clear all routes |
|
ip-addr |
Clear single host route |
|
ip-prefix |
Clear single exact match route |
|
nh-addr |
(Optional) Clear single path |
|
nh-interface |
(Optional) Interface Name |
|
no-ufdm |
(Optional) Do not tell UFDM about the change |
clear access-list hardware counters [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
access-list |
Clear access list statistical information |
|
hardware |
hardware information |
|
counters |
Clear access list counters |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
clear accounting log
Syntax Description
|
clear |
Reset functions |
|
accounting |
Clear accounting log(s) in all vdcs |
|
log |
Clear the accounting log(s) in all vdcs |
clear bfd statistics
Syntax Description
|
clear |
Clear |
|
bfd |
bfd |
|
statistics |
statistics |
clear bgp { ipv4 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | { } unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } }
Syntax Description
|
clear |
Reset functions |
|
ipv4 |
Clear IPv4 address-family |
|
ipv6 |
Clear IPv6 address-family |
|
bgp |
Clear BGP sessions |
|
unicast |
Clear unicast address-family |
|
multicast |
Clear multicast address-family |
|
policy |
Clear policy related information |
|
statistics |
Clear Route Filter statistics |
|
redistribute |
Statistics for redistribution |
|
isis |
(Optional) ISO IS-IS |
|
ospf |
(Optional) Open Shortest Path First (OSPF) |
|
ospfv3 |
(Optional) Open Shortest Path First v3 |
|
rip |
(Optional) Routing Information Protocol |
|
eigrp |
(Optional) Enhanced Interior Gateway Protocol |
|
static |
(Optional) Static routes |
|
direct |
(Optional) Directly connected |
|
amt |
(Optional) AMT anycast prefix |
|
lisp |
(Optional) LISP EID-prefixes in the non-default VRF |
|
tag |
(Optional) Source protocol tag |
|
neighbor |
Clear neighbor specific counters |
|
neighbor-id |
Neighbor IPv4 address |
|
route-map |
(Optional) Neighbor route-map |
|
prefix-list |
(Optional) Neighbor prefix-list |
|
filter-list |
(Optional) Neighbor filter-list |
|
out |
(Optional) Outbound policy |
|
in |
(Optional) Inbound policy |
|
default-originate |
(Optional) Default-originate policy |
|
dampening |
Clear dampening info |
|
network |
Configured IP prefix to advertise |
|
aggregate-address |
Configured BGP aggregate prefixes |
|
suppress-map |
Statistics of suppress policy |
|
advertise-map |
Statistics of advertise policy |
|
ip-addr |
IP network advertised |
|
mask |
Configured mask of the IP prefix advertised |
|
ip-mask |
Dotted 4-octet mask |
|
ip-prefix |
IP prefix in CIDR format |
clear bgp event-history { <bgp-event-hist> | detail | all | msgs }
Syntax Description
|
clear |
Reset functions |
|
bgp |
Clear BGP sessions |
|
event-history |
Clear event-history buffers |
|
bgp-event-hist |
Event History |
|
detail |
Show detailed event logs |
|
all |
All event history buffers |
|
msgs |
Clear message logs of BGP |
clear bootvar log
Syntax Description
|
clear |
Reset functions |
|
bootvar |
Clear the bootvar log |
|
log |
Clear the bootvar log |
clear cdp { counters [ interface <if0> ] | table [ interface1 <if1> ] }
Syntax Description
|
clear |
Reset functions |
|
cdp |
Cisco Discovery Protocol |
|
counters |
Clear CDP counters on all interfaces |
|
interface |
(Optional) Clear CDP counters on an interface |
|
if0 |
(Optional) |
|
table |
Clear CDP cache on all interfaces |
|
interface1 |
(Optional) Clear CDP cache on an interface |
|
if1 |
(Optional) |
clear checkpoint database [ user | system ]
Syntax Description
|
clear |
Reset functions |
|
checkpoint |
Clear configuration rollback checkpoint |
|
database |
Clear configuration rollback checkpoint database |
|
user |
(Optional) Clear configuration rollback checkpoint database for user checkpoints |
|
system |
(Optional) Clear configuration rollback checkpoint database for system checkpoints |
clear copp statistics
Syntax Description
|
clear |
Reset functions |
|
copp |
Clear policy information for copp |
|
statistics |
Clear statistics |
clear cores
Syntax Description
|
clear |
Reset functions |
|
cores |
clear all core dumps for the switch |
clear cores archive [ file <s0> ]
Syntax Description
|
clear |
Reset functions |
|
cores |
clear all cores for this vdc |
|
archive |
clear all core dump files for this vdc from logflash on this module |
|
file |
(Optional) delete a core file on logflash |
|
s0 |
(Optional) Name of file in directory 'core |
clear counters
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
clear counters buffers [ module <module> [ instance <instance> ] ] [ __readonly__ ]
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
buffers |
Clear system buffer max cell usage counter |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
|
instance |
(Optional) ASIC Instance Number |
|
instance |
(Optional) ASIC Instance Number in Decimal |
|
__readonly__ |
(Optional) Read Only |
clear counters interface <ifindex>
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
interface |
Clear interface counters |
|
ifindex |
Clear interface counters |
clear counters interface all
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
interface |
Clear interface counters |
|
all |
Clear all interface counters |
clear counters mpls strip
Syntax Description
|
clear |
Reset functions |
|
mpls |
Configure MPLS settings |
|
strip |
Stripping of MPLS headers |
|
counters |
stats/counters for labels |
{ clear dot1x all } | { clear dot1x interface <if> }
Syntax Description
|
clear |
Reset functions |
|
dot1x |
dot1x configuration commands |
|
all |
authenticator instances on all interfaces |
|
if |
target interface |
clear evb { hosts | vsi } [ force-standby ] *
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
hosts |
Clear EVB host information |
|
vsi |
Clear EVB vsi information |
|
force-standby |
(Optional) Force to clear standby entries |
|
* |
Clear all entries (Should be a * character) |
clear evb { hosts | vsi } [ force-standby ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ]
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
hosts |
Clear EVB host information |
|
vsi |
Clear EVB vsi information |
|
force-standby |
(Optional) Force to clear standby entries |
|
mac |
(Optional) Clear entries by filtering MAC address |
|
mac-addr |
(Optional) MAC Address |
|
interface |
(Optional) Clear entries by filtering interface |
|
intf-name |
(Optional) Interface name |
|
vlan |
(Optional) Clear entries by filtering VLAN |
|
vlan-id |
(Optional) VLAN ID |
|
vni |
(Optional) Clear entries by filtering VNI |
|
vni-id |
(Optional) VNI |
|
ip |
(Optional) Clear entries by filtering IP address |
|
ipv6 |
(Optional) Clear entries by filtering IPv6 address |
|
ip-addr |
(Optional) IPV4 host address |
clear evb internal adjacency
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
internal |
Clear EVB internal information |
|
adjacency |
Clear EVB adjacency state |
clear evb internal event-history { all | <evt-hist-subsystem> }
Syntax Description
|
clear |
Reset functions |
|
evb |
Clear EVB information |
|
internal |
Clear EVB internal information |
|
event-history |
Clear EVB event history buffers |
|
all |
All EVB logs |
|
evt-hist-subsystem |
EVB event history buffers |
clear evb statistics
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
statistics |
Clear EVB Statistics |
clear fabric database dci vrf { <vrf-name> | <vrf-known-name> } node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Fabric Database |
|
dci |
DCI profile |
|
vrf |
Display per-VRF information |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
|
node-id |
management ip address of this node |
|
mgmt-ip-address |
IP address in CIDR format |
|
peer-id |
(Optional) management ip address of peer |
|
peer-ip-address |
(Optional) IP address in CIDR format |
{ clear fabric database host { all | { vni <vni-id> } | { dot1q <vlan-id> } } [ re-sync ] } | { clear fabric database host vni <vni-id> re-apply } | { clear fabric database client uuid <uuid> }
Syntax Description
|
clear |
Reset functions |
|
fabric |
|
|
database |
|
|
host |
Active Host to profile mapping |
|
vni |
Virtual Network Identifier |
|
vni-id |
|
|
dot1q |
Dot1Q Encapsulation |
|
vlan-id |
|
|
re-apply |
Download new config parameters and re-apply |
|
re-sync |
(Optional) Force to sync the host entry |
|
all |
Remove all entries |
|
client |
Auto-config client |
|
uuid |
Auto-config client UUID |
|
uuid |
UUID |
clear fabric database host statistics
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Fabric Database |
|
host |
Auto-configured Hosts |
|
statistics |
Statistics |
clear fabric database include-vrf <vrf-name>
Syntax Description
|
clear |
Reset functions |
|
fabric |
|
|
database |
|
|
include-vrf |
Include VRF name |
|
vrf-name |
VRF name |
clear fabric database statistics [ type { network | profile | cabling | partition | bl-dci } [ server-proto ldap { ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Clear Fabric Database |
|
statistics |
Clear database statistics |
|
type |
(Optional) Enter database type |
|
network |
(Optional) Network Database |
|
profile |
(Optional) Port or Switch Profile Database |
|
cabling |
(Optional) Cable Management Database |
|
partition |
(Optional) Partition Database |
|
bl-dci |
(Optional) Border Leaf - DCI |
|
server-proto |
(Optional) Enter database protocol |
|
ldap |
(Optional) Use LDAP |
|
ip |
(Optional) IP address of server |
|
ipaddr |
(Optional) Enter IP address of server |
|
host |
(Optional) Hostname of server |
|
hostname |
(Optional) Enter hostname of server |
|
port |
(Optional) Port |
|
portnum |
(Optional) Enter port number |
|
vrf |
(Optional) vrf context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto xmpp { ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Clear Fabric Database |
|
statistics |
Clear database statistics |
|
type |
Enter database type |
|
network |
Network Database |
|
profile |
Port or Switch Profile Database |
|
cabling |
Cable Management Database |
|
partition |
Partition Database |
|
bl-dci |
Border Leaf - DCI |
|
server-proto |
Enter database protocol |
|
xmpp |
Use XMPP |
|
ip |
IP address of server |
|
ipaddr |
Enter IP address of server |
|
host |
Hostname of server |
|
hostname |
Enter hostname of server |
|
port |
(Optional) Port |
|
portnum |
(Optional) Enter port number |
|
vrf |
(Optional) vrf context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto radius group <groupname>
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Clear Fabric Database |
|
statistics |
Clear database statistics |
|
type |
Enter database type |
|
network |
Network Database |
|
profile |
Port or Switch Profile Database |
|
cabling |
Cable Management Database |
|
partition |
Partition Database |
|
bl-dci |
Border Leaf - DCI |
|
server-proto |
Enter database protocol |
|
radius |
Use RADIUS |
|
group |
AAA group |
|
groupname |
Enter AAA group name of servers |
clear flow exporter [ name ] <exportername>
Syntax Description
|
clear |
Reset functions |
|
flow |
NetFlow information |
|
exporter |
Clear NetFlow exporter statistics |
|
name |
(Optional) The name of the exporter |
|
exportername |
Specify an exporter |
clear flow monitor [ name ] <monitorname> [ cache [ force-export ] | statistics ]
Syntax Description
|
clear |
Reset functions |
|
flow |
NetFlow information |
|
monitor |
Clear monitor cache and statistics |
|
name |
(Optional) The name of the monitor |
|
monitorname |
Specify a monitor |
|
cache |
(Optional) Clear only monitor cache contents |
|
force-export |
(Optional) Force the cache entries to be exported |
|
statistics |
(Optional) Clear only the monitor cache statistics |
clear forwarding [ ip | ipv4 ] adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ]
Syntax Description
|
clear |
Reset functions |
|
forwarding |
forwarding |
|
adjacency |
display adjacency information |
|
mpls |
mpls adjacency information |
|
stats |
Clear adjacency statistics |
|
vrf |
(Optional) display info per VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
ip |
(Optional) ipv4 |
|
ipv4 |
(Optional) ipv4 |
|
aif |
(Optional) adjacency output interface |
|
anh |
(Optional) adjacency next hop |
clear forwarding cumulative counter [ all | v4_ucast_add | v4_ucast_del | v6_ucast_add | v6_ucast_del ] [ module <module> ]
Syntax Description
|
clear |
clear |
|
forwarding |
forwarding information |
|
cumulative |
accumulated prefix add/delete count |
|
counter |
counter |
|
all |
(Optional) all |
|
v4_ucast_add |
(Optional) IPv4 unicast route add count |
|
v4_ucast_del |
(Optional) IPv4 unicast route delete count |
|
v6_ucast_add |
(Optional) IPv6 unicast route add count |
|
v6_ucast_del |
(Optional) IPv6 unicast route delete count |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding internal message counts [ module <module> ]
Syntax Description
|
clear |
clear |
|
forwarding |
display fib information |
|
internal |
internal information |
|
message |
display internal message counts |
|
counts |
display internal message counts |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding internal unicast counts [ vdc { <vdc_id> | all } ] [ module <module> ] [ __readonly__ ]
Syntax Description
|
clear |
|
|
forwarding |
display fib information |
|
internal |
internal information |
|
unicast |
unicast counters |
|
counts |
display counts |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
|
vdc |
(Optional) vdc id |
|
vdc_id |
(Optional) vdc id |
|
all |
(Optional) all VDCs active on the module |
|
__readonly__ |
(Optional) |
clear forwarding ipv4 multicast counters [ vrf { <vrf-name> | <vrf-known-name> | all } ] { [ group <gaddr> [ source <saddr> ] ] | [ source <saddr> [ group <gaddr> ] ] } [ module <module> ]
Syntax Description
|
clear |
|
|
forwarding |
fib information |
|
vrf |
(Optional) Specify VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
ipv4 |
Ipv4 |
|
multicast |
Multicast IPv4 information |
|
counters |
|
|
group |
(Optional) Multicast IPv4 Group specific info |
|
gaddr |
(Optional) Multicast IPv4 Group Address |
|
source |
(Optional) Multicast IPv4 Source specific info |
|
saddr |
(Optional) Multicast IPv4 Source Address |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding ipv6 adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ]
Syntax Description
|
clear |
Reset functions |
|
forwarding |
forwarding |
|
ipv6 |
ipv6 |
|
adjacency |
adjacency information |
|
mpls |
mpls adjacency information |
|
stats |
Clear adjacency statistics |
|
vrf |
(Optional) display info per VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
aif |
(Optional) adjacency output interface |
clear forwarding ipv6 multicast counters [ vrf { <vrf-name> | <vrf-known-name> | all } ] { [ group <gaddr> [ source <saddr> ] ] | [ source <saddr> [ group <gaddr> ] ] } [ module <module> ]
Syntax Description
|
clear |
|
|
forwarding |
fib information |
|
vrf |
(Optional) Specify VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
ipv6 |
Ipv6 |
|
multicast |
Multicast IPv6 information |
|
counters |
|
|
group |
(Optional) Multicast IPv6 Group specific info |
|
source |
(Optional) Multicast IPv6 Source specific info |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding l2mcast info statistics [ module <num> ]
Syntax Description
|
clear |
Clear all entries |
|
forwarding |
Forwarding Information |
|
l2mcast |
Layer-2 multicast |
|
info |
L2mcast Internal Info |
|
statistics |
L2mcast Internal Info Statistics |
|
module |
(Optional) Slot |
|
num |
(Optional) Slot number |
clear forwarding l2vpn trace member-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
l2vpn |
L2VPN |
|
trace |
internal trace |
|
member-history |
member history |
clear forwarding mpls drop-stats
Syntax Description
|
clear |
Clear Statistics |
|
forwarding |
forwarding |
|
mpls |
mpls forwarding |
|
drop-stats |
Clear dropped packets stats |
clear forwarding mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ table <table_id> ] [ [ label <label> | <prefix> | <v6prefix> ] | [ label-space <label-space-id> ] ] [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
forwarding |
forwarding |
|
mpls |
mpls |
|
stats |
Clear Statistics |
|
vrf |
(Optional) display info per VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known vrf name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
table |
(Optional) display info per vpn-id |
|
table_id |
(Optional) table number |
|
label-space |
(Optional) label space |
|
label-space-id |
(Optional) label space id |
|
label |
(Optional) mpls labels |
|
label |
(Optional) mpls label value |
|
prefix |
(Optional) Labels for single exact match route |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding mpls trace adj-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
mpls |
mpls |
|
trace |
internal trace |
|
adj-history |
adjacency history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding mpls trace ecmp-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
mpls |
mpls |
|
trace |
internal trace |
|
ecmp-history |
ECMP history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding mpls trace label-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
mpls |
mpls |
|
trace |
internal trace |
|
label-history |
label history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding mpls trace te-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
mpls |
mpls |
|
trace |
internal trace |
|
te-history |
TE history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace ecmp-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
ecmp-history |
ECMP history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace mfib oif-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
oif-history |
oif history |
clear forwarding trace mfib oiflist-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
oiflist-history |
oiflist history |
clear forwarding trace mfib otv oif-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
otv |
otv entries |
|
oif-history |
oif history |
clear forwarding trace mfib otv oiflist-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
otv |
otv entries |
|
oiflist-history |
oiflist history |
clear forwarding trace mfib otv v4-route-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
otv |
otv entries |
|
v4-route-history |
v4 route history |
clear forwarding trace mfib otv v6-route-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
otv |
otv mfib entries |
|
v6-route-history |
v6 route history |
clear forwarding trace mfib platform oiflist-history
Syntax Description
|
clear |
Clear |
|
forwarding |
Forwarding information |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
platform |
platform information |
|
oiflist-history |
Oiflist history |
clear forwarding trace mfib v4-route-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
clear mfib entries |
|
v4-route-history |
v4 route history |
clear forwarding trace mfib v6-route-history
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
mfib |
mfib entries |
|
v6-route-history |
v6 route history |
clear forwarding trace nve-l3-vni-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
nve-l3-vni-history |
NVE L3 VNI history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace nve-peer-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
nve-peer-history |
NVE peer history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace otv-adj-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
otv-adj-history |
otv adj history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace otv-vlan-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
otv-vlan-history |
otv vlan prefix history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace v4-adj-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
v4-adj-history |
V4 adjacency history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace v4-pfx-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
v4-pfx-history |
V4 prefix history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace v4-rnh-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
v4-rnh-history |
V4 rnh history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace v6-adj-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
v6-adj-history |
V6 adjacency history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace v6-pfx-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
v6-pfx-history |
V6 prefix history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace v6-rnh-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
v6-rnh-history |
V6 rnh history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding trace vobj-history [ module <module> ]
Syntax Description
|
clear |
Clear bintrace entries |
|
forwarding |
forwarding |
|
trace |
internal trace |
|
vobj-history |
vobj history |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear frame traffic
Syntax Description
|
clear |
Reset functions |
|
frame |
Clear layer-2 frame statistics to/from the Route Processor |
|
traffic |
Clear layer-2 frame statistics to/from the Route Processor |
clear fs-daemon log
Syntax Description
|
clear |
Reset functions |
|
fs-daemon |
Clear the fs daemon log |
|
log |
Clear the fs daemon log |
clear hardware [ forwarding ] ip verify { all | address { source { broadcast | multicast } | class-e | destination { zero } | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version } [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
forwarding |
(Optional) Show hardware information for forwarding path |
|
ip |
IPv4 and IPv6 protocols |
|
verify |
IP packet validation checks in hardware |
|
class-e |
Class E IDS check |
|
all |
All IP packet validation checks |
|
address |
IPv4 and IPv6 Source and destination address validation |
|
source |
Check source address |
|
broadcast |
Source address is 255.255.255.255 |
|
multicast |
Source address is 224.x.x.x |
|
destination |
Check destination address |
|
zero |
Destination address is 0.0.0.0 |
|
identical |
Same IP SA and DA |
|
reserved |
Source address is 127.x.x.x |
|
checksum |
Verify IPv4 and IPv6 packet checksum |
|
protocol |
Verify IP procotol |
|
fragment |
Check IPv4 and IPv6 fragment with non-zero offset and DF bit active |
|
length |
Validate IPv4 packet header and payload length |
|
minimum |
Minimum IPv4 header length |
|
consistent |
Actual frame size is equal to or more than IPv4 length plus ethernet header |
|
maximum |
Check max fragment offset and payload length |
|
max-frag |
Fragment offset field value |
|
udp |
Maximum UDP length has to be less than IPv4 payload length |
|
max-tcp |
Maximum TCP length has to be less than IPv4 payload length |
|
tcp |
Validate TCP packet header |
|
tiny-frag |
Check TCP tiny fragment |
|
version |
Must be 4 for an ethertype of IPv4 (0x0800) |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
clear hardware flow ip [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
ip |
Internet Protocol Version 4 |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
force-export |
(Optional) Force to export data to collector |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
clear hardware flow ipmac [ { { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ module <num> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
ipmac |
IPv4+MAC |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
clear hardware flow ipv6 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
ipv6 |
Internet Protocol Version 6 |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
force-export |
(Optional) Force to export data to collector |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
clear hardware flow l2 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
l2 |
Layer 2 Protocol |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
force-export |
(Optional) Force to export data to collector |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
clear hardware flow mpls [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ force-export ] [ module <num> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
mpls |
MPLS Protocol |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
force-export |
(Optional) Force to export data to collector |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
clear hardware internal forwarding adjacency statistics default-route [ module <module> ]
Syntax Description
|
clear |
Show running system information |
|
hardware |
SHOW_HW_HELP |
|
internal |
SHOW_HW_INT_HELP |
|
forwarding |
Show hardware information for forwarding Asic |
|
adjacency |
display adjacency utilization |
|
statistics |
Show hardware statistics |
|
default-route |
Show for adjacency of default route |
|
module |
(Optional) slot |
|
module |
(Optional) Slot/module number |
clear hardware internal forwarding l3 counters [ module <module> ]
Syntax Description
|
clear |
clear running system information |
|
hardware |
clear hardware usage settings |
|
internal |
SHOW_HW_INT_HELP |
|
forwarding |
clear forwarding related settings |
|
l3 |
Layer-3 |
|
counters |
clear Layer-3 Counters |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
clear hardware internal interface-all asic counters [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
internal |
Show hardware internal information |
|
interface-all |
Clear counters for front panel and fabric interfaces |
|
asic |
Clear interface asic counters |
|
counters |
Clear interface counters |
|
module |
(Optional) Limit clear to single module |
|
module |
(Optional) Slot/module number |
clear hardware internal ns interrupts
Syntax Description
|
clear |
Reset functions |
|
hardware |
Clear hardware information |
|
internal |
Clear hardware internal information |
|
ns |
Northstar |
|
interrupts |
Interrupts |
clear hardware rate-limiter { all | layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> } [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
hardware |
Show hardware information |
|
rate-limiter |
Clear Rate-Limiter statistics |
|
all |
Clear all Rate-Limiter statistics |
|
layer-3 |
Layer-3 control and Routed packets |
|
l3-opts |
|
|
multicast |
Multicast data packets |
|
mcast-opts |
|
|
layer-2 |
Layer-2 control and Bridged packets |
|
l2-opts |
|
|
opts |
|
|
f1 |
Control packets from F1 modules to supervisor |
|
f1-opts |
|
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
clear hsrp counters [ <value> ] | clear hsrp state-history [ interface <interface-id> ] [ group <group-id> ]
Syntax Description
|
clear |
Reset functions |
|
hsrp |
HSRP commands |
|
counters |
Internal counters |
|
value |
(Optional) Counter to be cleared |
|
state-history |
Clear Groups' state history |
|
interface |
(Optional) Groups on this interface |
|
interface-id |
(Optional) Interface |
|
group |
(Optional) Group number |
|
group-id |
(Optional) Group Number |
clear icmpv6 cache { { interface [ <intf> ] } }
Syntax Description
|
clear |
Reset functions |
|
icmpv6 |
ICMPv6 Commands |
|
cache |
Clear icmpv6 cache |
|
interface |
Clear icmpv6 interface information |
|
intf |
(Optional) Interface name to clear |
clear install all failed-standby
Syntax Description
|
clear |
Reset functions |
|
install |
Clear the installer log |
|
all |
Clear the install all log |
|
failed-standby |
Clear the failed-standby log |
clear install failure-reason
Syntax Description
|
clear |
Reset functions |
|
install |
Clear the installer log |
|
failure-reason |
Clear the install failure-reason log |
clear install log-history { all | oldest <i0> }
Syntax Description
|
clear |
Reset functions |
|
install |
Install related show commands |
|
log-history |
Patch installer historical logs |
|
all |
Delete complete history log |
|
oldest |
oldest Delete the oldest <n> install log-history points |
|
i0 |
Number of log-history points to delete |
clear install status
Syntax Description
|
clear |
Reset functions |
|
install |
Clear the installer log |
|
status |
Clear the installer status log |
clear ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <ip-addr> | * } no-ufdm
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
adjacency |
Clear Adjacency |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
ip-addr |
IPV4 source address |
|
* |
Delete all adjacency in this context |
|
no-ufdm |
Create inconsistancy in adjacency |
clear ip adjacency cache { { interface [ <intf> ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
adjacency |
Configure Adjmgr |
|
cache |
Clear adjacency cache |
|
interface |
Clear adjacency interface information |
|
intf |
(Optional) Interface name to clear |
clear ip adjacency statistics
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
adjacency |
Clear Adjacency |
|
statistics |
Clear Adjacency Statistics |
clear ip amt tunnel [ <address4> <port> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
AMT clear commands |
|
amt |
AMT show commands |
|
ip |
Display IP information |
|
tunnel |
Display tunnel information |
|
vrf |
(Optional) Display information for VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
address4 |
(Optional) |
|
port |
(Optional) |
clear ip arp [ <interface> | <ip-address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ force-delete ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
Clear ARP table and statistics |
|
interface |
(Optional) ARP interface |
|
ip-address |
(Optional) IP address |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Clear ARP entries for all vrfs |
|
force-delete |
(Optional) Clear the entries from ARP table without refresh |
clear ip arp cache { { interface [ <intf> ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
arp |
|
cache |
Clear arp cache |
|
interface |
Clear arp interface information |
|
intf |
(Optional) Interface name to clear |
clear ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | suppression-event | suppression-errors | all } [ dump-to-file ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
ARP events |
|
event-history |
Clear the event history buffers |
|
packet |
inst packet logs |
|
event |
Internal event logs |
|
sync-event |
CFS and MCECM related event logs |
|
ip-sync-event |
L3 over vpc related event logs |
|
control |
ARP control event logs |
|
ha |
HA and GR logs |
|
errors |
inst error logs |
|
lcache |
lcache logs |
|
lcache-errors |
lcache_error logs |
|
client-event |
Client_event logs |
|
client-errors |
Client_error logs |
|
cli |
clear cli logs |
|
snmp |
SNMP logs |
|
suppression-event |
ARP suppression event logs |
|
suppression-errors |
ARP suppression error logs |
|
all |
All event history buffers |
|
dump-to-file |
(Optional) Dump the Arp event history logs into the file |
clear ip arp inspection log
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
arp |
Clear State of ARP features |
|
inspection |
Clear State of ARP Inspection |
|
log |
Log Buffer |
clear ip arp inspection statistics vlan <vlan-id>
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
arp |
Clear State of ARP features |
|
inspection |
Clear State of ARP Inspection |
|
statistics |
Statistics |
|
vlan |
Vlan range |
|
vlan-id |
VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19 |
clear ip arp statistics [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
Clear ARP table and statistics |
|
interface |
(Optional) ARP interface |
|
statistics |
Clear ARP statistics |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Clear ARP statistics for all vrfs |
clear ip arp suppression-cache statistics
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
Clear ARP table and statistics |
|
suppression-cache |
ARP-suppression cache |
|
statistics |
clear suppression statistics |
clear ip arp suppression <ip-address> vlan <vlan-id> force-delete
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
Clear ARP table and statistics |
|
suppression |
ARP-suppression based event |
|
ip-address |
IP address |
|
vlan |
Vlan id |
|
vlan-id |
Vlan |
|
force-delete |
Clear the entries from ARP table without refresh |
clear ip arp tunnel-statistics
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
Display ARP table and statistics |
|
tunnel-statistics |
Clear ARP statistics for tunneled packets |
clear ip arp vpc-statistics
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
arp |
Display ARP table and statistics |
|
vpc-statistics |
Clear ARP vPC statistics |
clear ip cache { { interface [ <intf> ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
cache |
Clear ip cache |
|
interface |
Clear ip interface information |
|
intf |
(Optional) Interface name to clear |
clear ip dhcp global statistics
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
dhcp |
Clear State of DHCP features |
|
global |
Clear State of DHCP global stats |
|
statistics |
DHCP snooping statistics |
clear ip dhcp relay statistics [ interface <intf> | { interface <intf> serverip <ip-addr-val> [ use-vrf <vrf-name> ] } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
dhcp |
Clear State of DHCP features |
|
relay |
Clear State of DHCP relay stats |
|
statistics |
DHCP Relay statistics |
|
interface |
(Optional) input interface |
|
intf |
(Optional) interface |
|
serverip |
(Optional) Helper address |
|
ip-addr-val |
(Optional) IP address |
|
use-vrf |
(Optional) helper address VRF membership |
|
vrf-name |
(Optional) VRF name |
clear ip dhcp snooping binding [ { vlan <vlan-id> mac <mac-addr> ip <ip-addr> interface <interface-id> } |
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
dhcp |
Clear State of DHCP features |
|
snooping |
Clear State of DHCP Snooping |
|
binding |
DHCP snooping bindings |
|
vlan |
(Optional) VLAN |
|
vlan-id |
(Optional) VLAN id |
|
mac |
(Optional) MAC address |
|
mac-addr |
(Optional) MAC address |
|
ip |
(Optional) IP address |
|
ip-addr |
(Optional) IP address |
|
interface |
(Optional) interface |
|
interface-id |
(Optional) interface |
clear ip dhcp snooping statistics [ { vlan <vlan-id> interface <intf> } |
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
dhcp |
Clear State of DHCP features |
|
snooping |
Clear State of DHCP snooping stats |
|
statistics |
DHCP snooping statistics |
|
vlan |
(Optional) VLAN |
|
vlan-id |
(Optional) VLAN id |
|
interface |
(Optional) input interface |
|
intf |
(Optional) interface |
clear ip dns all config
Syntax Description
|
clear |
Clear entries |
|
ip |
Configure ip feature |
|
dns |
DNS related config |
|
all |
All DNS related content |
|
config |
Domain-name, name-server, domain-list, sortlist, options, results |
clear ip dns use-vrf config
Syntax Description
|
clear |
Clear entries |
|
ip |
Configure ip feature |
|
dns |
DNS related config |
|
use-vrf |
Config with keyword use-vrf |
|
config |
Domain-name, name-server, domain-list |
clear ip eigrp [ <eigrp-ptag> ] event-history bfd
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
eigrp |
EIGRP clear commands |
|
eigrp-ptag |
(Optional) Process tag |
|
event-history |
Clear the event history buffers |
|
bfd |
Show bfd log of EIGRP |
clear ip eigrp [ <eigrp-ptag> ] route-map statistics redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
route-map |
Route-map related information |
|
statistics |
Route-map statistics |
|
redistribute |
Redistribute information from another routing protocol |
|
bgp |
Border Gateway Protocol (BGP) |
|
as |
Autonomous system number |
|
isis |
IS-IS Routing for IPv4 |
|
ospf |
Open Shortest Path First (OSPF) |
|
rip |
Routing Information Protocol (RIP) |
|
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
|
tag |
Process tag |
|
static |
Static routes |
|
direct |
Directly connected |
|
amt |
AMT Anycast prefix |
|
lisp |
LISP EID-prefixes |
clear ip ftm statistics
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ftm |
FTM API |
|
statistics |
Statistics |
clear ip igmp { groups | route } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP related information |
|
groups |
Route information |
|
route |
Route information |
|
all |
Clear all routes |
|
group-prefix |
Clear all routes within the Group prefix |
|
group |
Clear all routes matching the Group |
|
source |
(Optional) Clear a (S,G) route |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip igmp event-history [ <igmp-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP related information |
|
event-history |
Clear event-history buffers |
|
igmp-event-hist-buf-name |
(Optional) Event hist buffer name |
clear ip igmp interface statistics [ <interface> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP statistics information |
|
interface |
Interface related information |
|
statistics |
Packet/internal counter statistics |
|
interface |
(Optional) Specific interface only |
clear ip igmp internal mrib-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP related information |
|
internal |
Commands for internal use |
|
mrib-cache |
clear this vrf mrib-cache and repopulate |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip igmp snooping { report-policy | access-group } statistics [ vlan <vlan> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping information |
|
snooping |
Clear IGMP Snooping information |
|
report-policy |
IGMP Report Policy |
|
access-group |
IGMP access-group |
|
statistics |
Policy statistics |
|
vlan |
(Optional) Clear VLAN IGMP snooping policy statistics information |
|
vlan |
(Optional) Specify VLAN |
clear ip igmp snooping event-history [ <igmp-snoop-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping event hist buffers |
|
snooping |
Clear IGMP Snooping event hist buffers |
|
event-history |
Clear event history buffers |
|
igmp-snoop-event-hist-buf-name |
(Optional) Event history buffer name |
clear ip igmp snooping explicit-tracking { vlan <vlan> | bridge-domain <bdid> }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping information |
|
snooping |
Clear IGMP Snooping information |
|
explicit-tracking |
Clear Explicit Host tracking information |
|
vlan |
Clear explicit tracking information for VLAN |
|
vlan |
Specify VLAN |
|
bridge-domain |
Clear explicit tracking information for BD |
|
bdid |
Specify BD |
clear ip igmp snooping groups { <all> | { <group-prefix> | <group> } [ <source> ] } [ interface <if-name> ] { vlan { <vlan-id> | all } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping |
|
snooping |
Clear IGMP Snooping |
|
groups |
Clear snooped groups |
|
all |
Clear all groups |
|
group-prefix |
Group prefix to clear |
|
group |
Group address to clear |
|
source |
(Optional) Source address to clear |
|
interface |
(Optional) Specify interface to clear group state |
|
if-name |
(Optional) Interface name to clear |
|
vlan |
Clear information for VLAN/BD |
|
vlan-id |
Specify the VLAN/BD number |
|
all |
Clear for all VLAN/BDs |
clear ip igmp snooping proxy querier ports { vlan <vlan> | bridge-domain <bdid> } <if-name> [ purge ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping |
|
snooping |
Clear IGMP Snooping |
|
proxy |
Clear IGMP snooping proxy |
|
querier |
Clear IGMP snooping proxy querier |
|
ports |
Clear IGMP snooping proxy querier ports |
|
vlan |
Clear for a specific vlan |
|
vlan |
Specify the VLAN number |
|
bridge-domain |
Clear for a specific BD |
|
bdid |
Specify the BD number |
|
if-name |
Interface name to clear |
|
purge |
(Optional) Remove port from priority list |
clear ip igmp snooping statistics { vlan <vlan> | bridge-domain <bdid> | all }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping statistics information |
|
snooping |
Clear IGMP Snooping statistics information |
|
statistics |
Packet/internal counter statistics |
|
vlan |
Clear VLAN statistics |
|
vlan |
Specify VLAN |
|
bridge-domain |
Clear BD statistics |
|
bdid |
Specify BD |
|
all |
All VLAN/BDs |
clear ip igmp snooping vpc peer-link-exclude vlan { <vlan-id> | all } [ group <group-addr> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
igmp |
Clear IGMP Snooping information |
|
snooping |
Clear IGMP Snooping information |
|
vpc |
Clear vPC information |
|
peer-link-exclude |
Clear vPC peer-link Exclude state |
|
vlan |
Clear vpc peer-link Exclude state for VLAN/BD |
|
vlan-id |
Specify VLAN/BD |
|
all |
All VLAN/BDs |
|
group |
(Optional) Clear vpc peer-link Exclude state for VLAN/BD |
|
group-addr |
(Optional) Specify Group address |
clear ip interface statistics [ <interface> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
interface |
Clear IP related interface information |
|
statistics |
Clear IP interface statistics |
|
interface |
(Optional) Clear IP statistics for interface |
{ { clear ip lisp map-cache [ <eid-prefix> ] [ vrf { <vrf-name> | <vrf-known-name> } ] } | { clear ipv6 lisp map-cache [ <eid-prefix6> ] [ vrf { <vrf-name> | <vrf-known-name> } ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
lisp |
LISP clear commands |
|
map-cache |
Clear an EID-to-RLOC cache mapping in this ITR |
|
vrf |
(Optional) Clear entry for particular vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
eid-prefix |
(Optional) Clear entry associated with IP EID-prefix |
clear ip lisp statistics [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
lisp |
LISP clear commands |
|
statistics |
Clear global LISP statistics |
|
vrf |
(Optional) Clear statistics for vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
{ { clear ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] ipv4 { unicast | multicast } dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all dampening } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } } dampening [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv6 { unicast | multicast } } dampening [ <ipv6-prefix> ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all dampening } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
vrf |
(Optional) Virtual Router Context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
bgp |
Clear BGP sessions |
|
mbgp |
Clear MBGP sessions |
|
dampening |
Clear route flap dampening information |
|
ip-prefix |
(Optional) Clear route flap dampening for prefix |
|
ip-addr |
(Optional) Clear route flap dampening for one network |
|
ip-mask |
(Optional) Network mask |
|
ipv4 |
Clear IPv4 address-family |
|
ipv6 |
Clear IPv6 address-family |
|
unicast |
Clear unicast address-family |
|
multicast |
Clear multicast address-family |
|
all |
Clear all address-families |
{ { clear ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] ipv4 { unicast | multicast } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all flap-statistics } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] | regexp <regexp-str> ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv6 { unicast | multicast } } flap-statistics [ <ipv6-prefix> | regexp <regexp-str> ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all flap-statistics } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]
Syntax Description
|
clear |
Reset functions |
|
vrf |
(Optional) Virtual Router Context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
ip |
Clear IP commands |
|
bgp |
Clear BGP sessions |
|
mbgp |
Clear MBGP sessions |
|
flap-statistics |
Clear flap statistics |
|
ip-prefix |
(Optional) Clear flap statistics for one prefix |
|
ip-addr |
(Optional) Clear flap statistics for one network |
|
ip-mask |
(Optional) Network mask |
|
ipv4 |
Clear IPv4 address-family |
|
ipv6 |
Clear IPv6 address-family |
|
unicast |
Clear unicast address-family |
|
multicast |
Clear multicast address-family |
|
all |
Clear all address-families |
|
regexp |
(Optional) Clear flap statistics for routes matching the regular expression |
|
regexp-str |
(Optional) Regular expression to match the AS paths |
{ { clear ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { <neighbor-id> | * | <asn> | <prefix-id> peer-template <peer-template-name> } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify ] } | { clear ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { <neighbor-id> | * | <asn> | <prefix-id> | peer-template <peer-template-name> } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify | { ipv4 { unicast | multicast } | { } unicast | all } { soft [ in | out ] | dampened-paths | flap-statistics | no-notify } ] } | { clear bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast | mvpn } | ipv6 { unicast | multicast | mvpn } | { } unicast | all } { <neighbor-id> | <ipv6-neighbor-id> | * | <asn> | peer-template <peer-template-name> | <prefix-id> | <ipv6-prefix-id> } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
vrf |
(Optional) Virtual Router Context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
bgp |
Clear BGP sessions |
|
mbgp |
Clear MBGP sessions |
|
neighbor-id |
IP address of the neighbor to clear |
|
prefix-id |
Clear all neighbors matching the prefix |
|
* |
Clear all neighbors (Should be a * character) |
|
asn |
Clear all neighbors in an AS |
|
peer-template |
Clear all neighbors in a peer-template |
|
peer-template-name |
Peer-template name |
|
soft |
(Optional) Soft reconfiguration |
|
in |
(Optional) Clear soft reconfiguration inbound |
|
out |
(Optional) Clear soft reconfiguration outbound |
|
ipv4 |
(Optional) Clear IPv4 address-family |
|
ipv6 |
Clear IPv6 address-family |
|
unicast |
(Optional) Clear unicast address-family |
|
multicast |
(Optional) Clear multicast address-family |
|
mvpn |
Display BGP information for MVPN address family |
|
all |
(Optional) Clear all address-families |
|
dampened-paths |
(Optional) Clear dampened paths for neighbor |
|
flap-statistics |
(Optional) Clear flap statistics for neighbor |
|
no-notify |
(Optional) Clear without sending notification |
clear ip msdp { sa-cache | route } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
msdp |
MSDP clear commands |
|
sa-cache |
Clear contents of SA cache |
|
route |
Clear contents of SA cache |
|
all |
Clear all routes |
|
group-prefix |
Clear all routes within the Group prefix |
|
group |
Clear all routes matching the Group |
|
source |
(Optional) Clear a (S,G) route |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip msdp event-history [ <msdp-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
msdp |
MSDP global configuration commands |
|
event-history |
Clear the event-history buffer instances |
|
msdp-event-hist-buf-name |
(Optional) Specify the particular instance of the event-history buffer |
clear ip msdp peer <peer-address> [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
msdp |
MSDP clear commands |
|
peer |
Clear MSDP peer connection |
|
peer-address |
IP address of MSDP peer |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear ip msdp policy statistics sa-policy <peer-address> { in | out } [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
msdp |
MSDP global configuration commands |
|
policy |
Policy information |
|
statistics |
Policy statistics |
|
sa-policy |
Configureed SA policy for MSDP peer |
|
peer-address |
IP address of MSDP peer for SA policy |
|
in |
Input policy |
|
out |
Output policy |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear ip msdp statistics [ <peer-address> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
msdp |
MSDP clear commands |
|
statistics |
Clear statistics for peers |
|
peer-address |
(Optional) IP address of MSDP peer |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear ip nat translation { all | inside <insideGlobalIP> <insideLocalIP> [ outside <outsideLocalIP> <outsideGlobalIP> ] | outside <outsideLocalIP> <outsideGlobalIP> }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear ip counters |
|
nat |
Clear NAT |
|
translation |
Clear dynamic translation |
|
all |
Delete all dynamic translations |
|
inside |
Inside addresses |
|
insideGlobalIP |
Inside global IP address |
|
insideLocalIP |
Inside local IP address |
|
outside |
(Optional) Outside addresses |
|
outsideLocalIP |
(Optional) Outside local IP address |
|
outsideGlobalIP |
(Optional) Outside global IP address |
clear ip ospf [ <tag> ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
statistics |
Clear event counters |
clear ip ospf [ <tag> ] traffic [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
traffic |
Clear packet counters |
|
interface |
(Optional) Interface to clear all traffic on |
clear ip ospf [ <tag> ] neighbor { { { * | <neighborid> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { <interface> } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
neighbor |
Clear one or more neighbors |
|
* |
Clear all neighbors |
|
neighborid |
Source IP address, or router ID of the neighbor |
|
interface |
Interface to clear all neighbors on |
clear ip ospf [ <tag> ] policy statistics { { redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
policy |
Clear Policy related information |
|
statistics |
Display Route Filter statistics |
|
redistribute |
Statistics for redistribution |
|
isis |
ISO Intermediate-to-Intermediate (IS-IS) |
|
bgp |
Border Gateway Protocol (BGP) |
|
as |
Autonomous system number |
|
ospf |
Open Shortest Path First (OSPFv2) |
|
eigrp |
Enhanced Interior Gateway Protocol (EIGRP) |
|
rip |
Routing Information Protocol (RIP) |
|
static |
Static |
|
direct |
Directly connected |
|
amt |
AMT anycast prefix |
|
lisp |
LISP EID-prefixes |
|
area |
Configure area properties |
|
area-id-ip |
Area Id as an integer or ip address |
|
filter-list |
Filter prefixes between OSPF areas |
|
in |
Filter networks sent to this area |
|
out |
Filter networks sent from this area |
|
tag |
clear ip ospf [ <tag> ] interface { * | <interface> }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
interface |
Clear one or more interfaces |
|
* |
Clear all interfaces |
|
interface |
Interface to clear |
clear ip ospf [ <tag> ] database
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
database |
Clear the LSDB and all neighbors |
clear ip ospf [ <tag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ospf |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
redistribution |
Clear OSPF route redistribution |
clear ip pim event-history [ <pim-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
pim |
PIM clear commands |
|
event-history |
Clear event history buffers |
|
pim-event-hist-buf-name |
(Optional) Event history buffer instance |
clear ip pim interface statistics [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
pim |
Clear PIM information |
|
interface |
Interface related information |
|
statistics |
Packet interface counter statistics |
|
interface |
(Optional) Interface name to clear |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip pim policy statistics { jp-policy | neighbor-policy } <interface>
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
pim |
PIM global configuration commands |
|
policy |
Policy related information |
|
statistics |
Policy statistics |
|
jp-policy |
Statistics for jp-policy |
|
neighbor-policy |
Statistics for neighbor-policy |
|
interface |
Interface |
clear ip pim policy statistics { register-policy | bsr { bsr-policy | rp-candidate-policy } | auto-rp { rp-candidate-policy | mapping-agent-policy } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
pim |
PIM global configuration commands |
|
policy |
Policy related information |
|
statistics |
Policy statistics |
|
register-policy |
Show statistics for register-policy |
|
bsr |
Bootstrap protocol RP-distribution policy |
|
bsr-policy |
Statistics for BSR messages |
|
rp-candidate-policy |
Statistics for RP candidate messages |
|
auto-rp |
Statistics for auto-rp messages |
|
rp-candidate-policy |
Statistics for RP candidate messages |
|
mapping-agent-policy |
Statistics for mapping agent messages |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip pim route { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
pim |
PIM clear commands |
|
route |
Route information |
|
all |
Clear all routes |
|
group-prefix |
Clear all routes within the Group prefix |
|
group |
Clear all routes matching the Group |
|
source |
(Optional) Clear a (S,G) route |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
pim |
Clear PIM information |
|
statistics |
Packet global counter statistics |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
{ { clear ip rip policy statistics redistribute bgp <as> } | { clear ip rip policy statistics redistribute eigrp <tag> } | { clear ip rip policy statistics redistribute isis <tag> } | { clear ip rip policy statistics redistribute rip <tag> } | { clear ip rip policy statistics redistribute ospf <tag> } | { clear ip rip policy statistics redistribute direct } | { clear ip rip policy statistics redistribute static } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rip |
Routing Information Protocol (RIP) |
|
policy |
Policy related information |
|
statistics |
Policy statistics |
|
redistribute |
RIP redistribute routes from other routing protocol |
|
bgp |
Border Gateway Protocol (BGP) |
|
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
|
as |
Autonomous system number |
|
isis |
Intermediate-to-intermediate (ISIS) |
|
ospf |
Open Shortest Path First (OSPFv2) |
|
tag |
Process tag |
|
static |
Static routes |
|
direct |
Directly connected routes |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ip rsvp authentication [ <nbr-addr> ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
authentication |
Clear security associations |
|
nbr-addr |
(Optional) RSVP Neighbor address |
clear ip rsvp counters [ teardown | authentication | all ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
counters |
RSVP counters |
|
teardown |
(Optional) Clear signaling tear information |
|
authentication |
(Optional) Display RSVP Security Association information |
|
all |
(Optional) Clear all information |
clear ip rsvp hello instance counters
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
hello |
RSVP Hello configuration commands |
|
instance |
Clear Hello instance information |
|
counters |
Clear RSVP statistics |
clear ip rsvp internal counters [ error | client | mts | pss | refresh | reliable | batch-history ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
internal |
Clear RSVP internal information |
|
counters |
Clear RSVP statistics |
|
error |
(Optional) Clear signaling error information |
|
client |
(Optional) Clear client information |
|
mts |
(Optional) Clear message service information |
|
pss |
(Optional) Clear persistent store information |
|
refresh |
(Optional) Clear refresh information |
|
reliable |
(Optional) Clear reliable message information |
|
batch-history |
(Optional) Clear batching history |
clear ip rsvp reservation { [ destination <dest> ] [ source <src> ] [ ip-protocol <proto> ] [ dst-port <dport> ] [ src-port <sport> ] | <all> }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
reservation |
Clear RSVP reservation state |
|
destination |
(Optional) Clear based on destination address |
|
dest |
(Optional) Destination address |
|
source |
(Optional) Clear based on a source address |
|
src |
(Optional) Source address |
|
ip-protocol |
(Optional) Clear based on IP protocol |
|
proto |
(Optional) IP protocol value |
|
dst-port |
(Optional) Clear based on destination port |
|
dport |
(Optional) Destination Port value |
|
src-port |
(Optional) Clear based on a source port |
|
sport |
(Optional) Source port value |
|
all |
Clear all state |
clear ip rsvp sender { [ destination <dest> ] [ source <src> ] [ ip-protocol <proto> ] [ dst-port <dport> ] [ src-port <sport> ] | <all> }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
sender |
Clear RSVP sender state |
|
destination |
(Optional) Clear based on destination address |
|
dest |
(Optional) Destination address |
|
source |
(Optional) Clear based on a source address |
|
src |
(Optional) Source address |
|
ip-protocol |
(Optional) Clear based on IP protocol |
|
proto |
(Optional) IP protocol value |
|
dst-port |
(Optional) Clear based on destination port |
|
dport |
(Optional) Destination Port value |
|
src-port |
(Optional) Clear based on a source port |
|
sport |
(Optional) Source port value |
|
all |
Clear all state |
clear ip rsvp signalling [ rate-limit | refresh-reduction ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
rsvp |
Clear RSVP information |
|
signalling |
Configure RSVP Signalling information |
|
rate-limit |
(Optional) Clear rate-limit counters |
|
refresh-reduction |
(Optional) Clear refresh-reduction counters |
clear ip stats
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
stats |
Clear IP internal stats |
clear ip traffic [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
traffic |
Clear IP global statistics |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear ip vip { uuid <uuid> | <vip-addr> vrf { <vrf-name> | <vrf-known-name> } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
vip |
Clear virtual ip address |
|
uuid |
UUID of client |
|
uuid |
UUID of client whose vips needs to be cleared |
|
vip-addr |
VIP in format A.B.C.D |
|
vrf |
Display per-VRF information |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
clear ipv6 { icmp | nd } { interface statistics [ <interface> ] | global statistics }
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
icmp |
Clear ICMPv6 information |
|
nd |
Clear Neighbor Discovery interface information |
|
interface |
Clear ICMPv6 related interface information |
|
statistics |
Clear ICMPv6 interface statistics |
|
global |
Clear ICMPv6 global statistics |
|
interface |
(Optional) Interface to clear statistics for |
clear ipv6 [ icmp ] mld { groups | route } { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
icmp |
(Optional) Clear ICMPv6 information |
|
mld |
Clear Multicast Listener Discovery information |
|
groups |
Route information |
|
route |
Route information |
|
all |
Clear all routes |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ipv6 adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <ipv6-addr> | * } no-ufdm
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
adjacency |
Clear Adjacency |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
* |
Delete all adjacency in this context |
|
no-ufdm |
Create inconsistancy in adjacency |
clear ipv6 adjacency statistics
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
adjacency |
Clear Adjacency |
|
statistics |
Clear Adjacency Statistics |
clear ipv6 amt tunnel [ <address6> <port> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
AMT clear commands |
|
amt |
AMT show commands |
|
ipv6 |
Display IP information |
|
tunnel |
Display tunnel information |
|
vrf |
(Optional) Display information for VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
port |
(Optional) |
clear ipv6 cache { { interface [ <intf> ] } }
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
cache |
Clear ipv6 cache |
|
interface |
Clear ipv6 interface information |
|
intf |
(Optional) Interface name to clear |
clear ipv6 dhcp relay statistics [ interface <intf> [ [ server-ip <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <dest-interface> ] ] | [ server-ip <ip-addr-val> [ interface <dest-interface> ] [ use-vrf <vrf-name> ] ] ] ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
IPv6 |
|
dhcp |
Clear State of DHCPv6 features |
|
relay |
Clear State of DHCPv6 relay stats |
|
statistics |
DHCPv6 Relay statistics |
|
interface |
(Optional) input interface |
|
intf |
(Optional) interface |
|
server-ip |
(Optional) Server address |
|
use-vrf |
(Optional) Server address VRF membership |
|
vrf-name |
(Optional) VRF name |
|
interface |
(Optional) Destination interface for the server address |
|
dest-interface |
(Optional) Destination interface |
clear ipv6 eigrp [ <eigrp-ptag> ] route-map statistics redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt | lisp } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
route-map |
Route-map related information |
|
statistics |
Route-map statistics |
|
redistribute |
Redistribute information from another routing protocol |
|
bgp |
Border Gateway Protocol (BGP) |
|
as |
Autonomous system number |
|
isis |
IS-IS Routing for IPv4 |
|
ospfv3 |
Open Shortest Path First (OSPF) V3 |
|
rip |
Routing Information Protocol (RIP) |
|
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
|
tag |
Process tag |
|
static |
Static routes |
|
direct |
Directly connected |
|
amt |
AMT Anycast prefix |
|
lisp |
LISP EID-prefixes |
clear ipv6 icmp vpc-statistics
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
icmp |
Clear ICMPv6 information |
|
vpc-statistics |
Clear ICMPv6 ND vPC statistics |
clear ipv6 interface statistics [ <interface> ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
interface |
Clear IPv6 related interface information |
|
statistics |
Clear IPv6 interface statistics |
|
interface |
(Optional) Interface to clear statistics for |
clear ipv6 lisp statistics [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
lisp |
LISP clear commands |
|
statistics |
Clear global LISP statistics |
|
vrf |
(Optional) Clear statistics for vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear ipv6 mtu [ <ipv6-addr> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
mtu |
Display IPV6 Path MTU Cache |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear ipv6 neighbor [ [ <nbr-addr> [ <intf> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] | vrf { <vrf-name> | <vrf-known-name> | all } | <interface> ] [ force-delete ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
neighbor |
Clear ICMPv6 neighbor cache |
|
intf |
(Optional) Clear cache entries for given interface |
|
interface |
(Optional) Clear cache entries for given interface |
|
force-delete |
(Optional) Clear the cache entries without refresh |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ipv6 netstack mroute { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
netstack |
Netstack's local cache |
|
mroute |
Multicast route information |
|
all |
Clear all routes |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ipv6 pim event-history [ <pim6-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
pim |
Clear PIM event history buffers |
|
event-history |
Clear event-history buffers |
|
pim6-event-hist-buf-name |
(Optional) Event-history buffer instance |
clear ipv6 pim interface statistics [ <interface> ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
pim |
Clear PIM6 information |
|
interface |
Interface related information |
|
statistics |
Packet interface counter statistics |
|
interface |
(Optional) Interface name to clear |
clear ipv6 pim policy statistics { jp-policy | neighbor-policy } <interface>
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
pim |
Clear PIM information |
|
policy |
Policy related information |
|
statistics |
Policy statistics |
|
jp-policy |
Statistics for jp-policy |
|
neighbor-policy |
Statistics for neighbor-policy |
|
interface |
Interface |
clear ipv6 pim route { <all> | <group-prefix> | <group> [ <source> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
pim |
PIM6 clear commands |
|
route |
Route information |
|
all |
Clear all routes |
|
vrf |
(Optional) Clear information for particular VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
pim |
Clear PIM6 information |
|
statistics |
Packet global counter statistics |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
{ { clear ipv6 rip policy statistics redistribute bgp <as> } | { clear ipv6 rip policy statistics redistribute eigrp <tag> } | { clear ipv6 rip policy statistics redistribute isis <tag> } | { clear ipv6 rip policy statistics redistribute rip <tag> } | { clear ipv6 rip policy statistics redistribute ospfv3 <tag> } | { clear ipv6 rip policy statistics redistribute direct } | { clear ipv6 rip policy statistics redistribute static } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
rip |
Routing Information Protocol (RIP) |
|
policy |
Policy related information |
|
statistics |
Policy statistics |
|
redistribute |
RIP redistribute routes from other routing protocol |
|
bgp |
Border Gateway Protocol (BGP) |
|
as |
Autonomous system number |
|
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
|
isis |
Intermediate-to-intermediate (ISIS) |
|
ospfv3 |
Open Shortest Path First (OSPFv3) |
|
tag |
Process tag |
|
static |
Static routes |
|
direct |
Directly connected routes |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ipv6 statistics
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
statistics |
Clear IPv6 global statistics |
clear ipv6 traffic [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
ipv6 |
Clear IPv6 commands |
|
traffic |
Clear IPv6 traffic statistics |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] route-map statistics { { redistribute { bgp <as> | { <src-isis> | eigrp | ospf | rip } <tag> } } | { redistribute { static | direct | amt | lisp } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
ip |
(Optional) Clear IS-IS IPv4 information |
|
route-map |
Clear IS-IS route-map information |
|
statistics |
Clear IS-IS route-map statistics |
|
redistribute |
Redistribute information from another routing protocol |
|
bgp |
Border Gateway Protocol (BGP) |
|
eigrp |
Enhanced Interior Gateway Protocol |
|
as |
Autonomous system number |
|
src-isis |
IS-IS Routing for IPv4 |
|
ospf |
Open Shortest Path First (OSPF) |
|
rip |
RIP for IPv4 |
|
tag |
Process tag |
|
static |
Static routes |
|
direct |
Directly connected |
|
amt |
AMT anycast prefix |
|
lisp |
LISP EID-prefixes |
|
distribute |
Distribute routes between ISIS levels |
|
into |
from level-n into level-m |
|
src-level |
Route-distribution between levels |
|
dst-level |
Route-distribution between levels |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 route-map statistics { { redistribute { bgp <as> | { <src-isis> | eigrp | ospfv3 | rip } <tag> } } | { redistribute { static | direct | amt | lisp } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
ipv6 |
Clear IS-IS IPv6 information |
|
statistics |
Clear IS-IS route-map statistics |
|
redistribute |
Redistribute information from another routing protocol |
|
bgp |
Border Gateway Protocol (BGP) |
|
eigrp |
Enhanced Interior Gateway Protocol |
|
as |
Autonomous system number |
|
src-isis |
IS-IS Routing for IPv6 |
|
ospfv3 |
Open Shortest Path First (OSPF) V3 |
|
rip |
RIP for IPv6 (RIPNG) |
|
tag |
Process tag |
|
static |
Static routes |
|
direct |
Directly connected |
|
amt |
AMT anycast prefix |
|
lisp |
LISP EID-prefixes |
|
route-map |
Route-map to constrain redistribution |
|
distribute |
Distribute routes between ISIS levels |
|
into |
from level-n into level-m |
|
src-level |
Route-distribution between levels |
|
dst-level |
Route-distribution between levels |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics { * | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
statistics |
Clear IS-IS protocol statistics |
|
* |
All IS-IS protocol statistics |
|
interface |
IS-IS interface |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] dpi [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
dpi |
Clear IS-IS DPI logs |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] spf-log [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
spf-log |
Display IS-IS SPF information |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic { * | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
traffic |
Clear IS-IS traffic information |
|
* |
All IS-IS traffic information |
|
interface |
IS-IS interface |
clear isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] adjacency { * | { <interface> | system-id <sid> } + } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
adjacency |
Clear IS-IS adjacency state |
|
* |
IS-IS adjacencies on all interfaces |
|
interface |
IS-IS interface |
|
system-id |
Hostname or System ID |
|
sid |
Hostname or System ID (in the form of XXXX.XXXX.XXXX) |
clear isis [ <isis-tag> ] event-history [ <isis-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
event-history |
Clear event history buffers |
|
isis-event-hist-buf-name |
(Optional) Clear the specific event history buffer |
clear isis [ <isis-tag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
redistribution |
Clear IS-IS redistributed information |
clear itd statistics <service-name>
Syntax Description
|
clear |
Reset functions |
|
itd |
ITD service |
|
statistics |
ITD statistics |
|
service-name |
ITD service-name |
clear l2fwder statistics
Syntax Description
|
clear |
Reset functions |
|
l2fwder |
Clear L2FWDER related information |
|
statistics |
Clear the L2FWDER packet counters |
clear lacp counters [ interface <if0> ]
Syntax Description
|
clear |
Reset functions |
|
lacp |
LACP protocol |
|
counters |
LACP counters |
|
interface |
(Optional) Specify a port-channel |
|
if0 |
(Optional) |
clear ldap-server statistics <host0> [ __readonly__ ]
Syntax Description
|
clear |
Reset functions |
|
ldap-server |
Clear LDAP related parameters |
|
statistics |
Clear LDAP statistics |
|
host0 |
DNS name or IP address |
|
__readonly__ |
(Optional) |
clear license { <license-file> [ force ] | sprom | <s0> }
Syntax Description
|
clear |
Reset functions |
|
license |
clear license |
|
license-file |
License file to be uninstalled |
|
force |
(Optional) Force license clear (don't prompt) |
|
sprom |
clear license contents in sprom |
|
s0 |
License file to be uninstalled |
clear lim counters [ timeline ]
Syntax Description
|
clear |
Clear lim counters |
|
lim |
clear lim counters |
|
counters |
clear lim counters |
|
timeline |
(Optional) Clear all lim counters |
clear line <s0>
Syntax Description
|
clear |
Reset functions |
|
line |
Kill a session on particular vty |
|
s0 |
Enter the vty name |
clear lisp ddt referral-cache [ instance-id <iid> ] [ <eid-prefix> | <eid-prefix6> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
lisp |
LISP clear commands |
|
ddt |
LISP Delegated Database Tree |
|
referral-cache |
Clear the DDT referral cache |
|
vrf |
(Optional) Clear entry for particular vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
instance-id |
(Optional) Clear entry for specific instance-ID |
|
iid |
(Optional) 24-bit instance-ID value |
|
eid-prefix |
(Optional) Clear entry associated with IP EID-prefix |
clear lisp dynamic-eid { <dyn-eid-name> | <dyn-eid> } [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
lisp |
LISP clear commands |
|
dynamic-eid |
Clear dynamic-EID state |
|
dyn-eid |
IPv4 address of dynamic-EID entry |
|
dyn-eid-name |
Clear entries discovered for a dynamic-EID range |
|
vrf |
(Optional) Clear dynamic-EID entries for vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear lisp internal event-history <lisp-event-hist>
Syntax Description
|
clear |
Reset functions |
|
lisp |
LISP clear commands |
|
internal |
Commands for internal use |
|
event-history |
Clear LISP event log |
|
lisp-event-hist |
Clear LISP event log |
clear lisp proxy-itr [ <addr> | <addr6> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
lisp |
LISP clear commands |
|
proxy-itr |
Clear discovered PITRs |
|
addr |
(Optional) IPv4 locator address of PITR |
|
vrf |
(Optional) Clear proxy-itr state for vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear lisp site <site-name> [ instance-id <iid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
lisp |
LISP clear commands |
|
site |
Clear site registration data |
|
site-name |
Clear registration data for a single site |
|
instance-id |
(Optional) Clear registration for a single instance-id within a site |
|
iid |
(Optional) 24-bit instance-ID value |
|
vrf |
(Optional) Clear site entries for vrf |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear lldp counters
Syntax Description
|
clear |
Reset functions |
|
lldp |
Reset the lldp counters |
|
counters |
Reset the lldp traffic counters to zero |
clear lldp counters interface <if0>
Syntax Description
|
clear |
Reset functions |
|
lldp |
Reset the lldp counters |
|
counters |
Reset the lldp traffic counters to zero |
|
interface |
Clear lldp traffic counters per interface |
|
if0 |
Enter interface |
clear logging logfile
Syntax Description
|
clear |
Reset functions |
|
logging |
Clear logging information |
|
logfile |
Clear logfile messages |
clear logging nvram
Syntax Description
|
clear |
Reset functions |
|
logging |
Clear logging information |
|
nvram |
Clear nvram logs |
clear logging onboard [ { counter-stats | epld-log | internal { <dc3_options> } | module <module> [ { counter-stats | internal { <dc3_options> } } ] } ]
Syntax Description
|
clear |
Reset functions |
|
logging |
Clear logging information |
|
onboard |
Clear OBFL information |
|
counter-stats |
(Optional) Clear OBFL counter statistics |
|
epld-log |
(Optional) Clear EPLD log |
|
internal |
(Optional) Clear Logging Onboard Internal |
|
module |
(Optional) Clear OBFL information for Module |
|
module |
(Optional) Enter module number |
|
counter-stats |
(Optional) Clear OBFL counter statistics |
|
dc3_options |
(Optional) dc3 options |
clear logging onboard [ { card-boot-history | card-first-power-on | environmental-history | error-stats | exception-log | interrupt-stats | module <module> [ { environmental-history | error-stats | exception-log | interrupt-stats | obfl-logs | stack-trace | card-boot-history | card-first-power-on } ] | obfl-logs | stack-trace } ]
Syntax Description
|
clear |
Reset functions |
|
logging |
Clear logging information |
|
onboard |
Clear OBFL information |
|
environmental-history |
(Optional) Clear OBFL environmental history |
|
error-stats |
(Optional) Clear OBFL error statistics |
|
exception-log |
(Optional) Clear OBFL exception log |
|
interrupt-stats |
(Optional) Clear OBFL interrupt statistics |
|
card-boot-history |
(Optional) Clear Card Boot History |
|
card-first-power-on |
(Optional) Clear Card First Power On |
|
module |
(Optional) Clear OBFL information for Module |
|
module |
(Optional) Enter module number |
|
obfl-logs |
(Optional) Clear OBFL (boot-uptime/device-version/obfl-history). |
|
stack-trace |
(Optional) Clear OBFL stack trace |
clear logging session
Syntax Description
|
clear |
Reset functions |
|
logging |
Clear logging information |
|
session |
Clear logging session |
clear login failures
Syntax Description
|
clear |
Reset functions |
|
login |
Secure Login |
|
failures |
Clear login failures in the current watch period |
clear mac address-table datapath { dynamic [ vlan <id> ] | static [ vlan <id> ] | { statistics [ interface ] } | isis_intf_stats }
Syntax Description
|
clear |
Clear |
|
mac |
MAC configuration commands |
|
address-table |
MAC Address Table |
|
datapath |
Titanium Datapath Table |
|
dynamic |
clear dynamic entries from Titanium PD Forwarding Table |
|
static |
USE WITH CAUTION!! clear static entries from Titanium PD Forwarding Table |
|
vlan |
(Optional) VLAN |
|
id |
(Optional) VLAN ID |
|
statistics |
Clear datapath statistics |
|
interface |
(Optional) Clear datapath interface statistics |
|
isis_intf_stats |
Statistics of ISIS Frames Tx/Rx |
clear mmode database
Syntax Description
|
clear |
Reset functions |
|
mmode |
Clear mmode |
|
database |
Clear mmode database |
clear mpls forwarding statistics [ interface { <interface> | all } ]
Syntax Description
|
clear |
Reset functions |
|
mpls |
MPLS events |
|
forwarding |
Clear MPLS software forwarded |
|
statistics |
Traffic statistics |
|
interface |
(Optional) Interface specific information |
|
interface |
(Optional) Interface chosen to clear statistics |
|
all |
(Optional) All interfaces |
clear mpls ldp internal counters { all | system | forwarding }
Syntax Description
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
ldp |
Clear LDP state |
|
internal |
Clear LDP internal information |
|
counters |
Clear LDP statistics |
|
all |
Clear all LDP statistics |
|
system |
Clear LDP system statistics |
|
forwarding |
Clear LDP forwarding related statistics |
clear mpls ldp neighbor [ vrf { <vrf-name> | <vrf-known-name> } ] { <address> | * }
Syntax Description
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
ldp |
Clear LDP state |
|
neighbor |
Clear LDP neighbor sessions |
|
vrf |
(Optional) VRF Routing/Forwarding instance information |
|
vrf-name |
(Optional) VPN Routing/Forwarding instance name |
|
vrf-known-name |
(Optional) Known VRF name |
|
address |
IP address for LDP neighbor |
|
* |
Clear all neighbors |
clear mpls strip labels { static | dynamic | all }
Syntax Description
|
clear |
Reset functions |
|
mpls |
Configure MPLS settings |
|
strip |
Stripping of MPLS headers |
|
labels |
labels in database |
|
all |
all labels [default] |
|
static |
labels learned using cli |
|
dynamic |
dynamically learned |
clear mpls switching label statistics { all | <label-value> }
Syntax Description
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
switching |
Clear MPLS label switching database information |
|
label |
Clear MPLS label information |
|
statistics |
Clear label statistics |
|
all |
Clear statistics for all labels |
|
label-value |
Label |
clear mpls traffic-eng auto-bw timers
Syntax Description
|
auto-bw |
Clear auto-bw collection |
|
timers |
Clear tunnel counters |
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
traffic-eng |
Clear MPLS Traffic-Engineering statistical information |
clear mpls traffic-eng internal counters { forwarding | mts | rsvp-client | threads }
Syntax Description
|
counters |
Clear internal counters |
|
forwarding |
Clear forwarding programming stats |
|
mts |
Clear MTS send and receive stats |
|
rsvp-client |
Clear rsvp client call stats |
|
threads |
Clear thread event stats |
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
traffic-eng |
Clear MPLS Traffic-Engineering statistical information |
|
internal |
Clear internal information |
clear mpls traffic-eng link-management counters
Syntax Description
|
link-management |
Clear Link-Management statistical information |
|
counters |
Clear Link-Management counters |
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
traffic-eng |
Clear MPLS Traffic-Engineering statistical information |
clear mpls traffic-eng tunnel counters
Syntax Description
|
tunnel |
Clear Tunnel statistics |
|
counters |
Clear tunnel counters |
|
clear |
Reset functions |
|
mpls |
MPLS clear commands |
|
traffic-eng |
Clear MPLS Traffic-Engineering statistical information |
clear ntp session
Syntax Description
|
clear |
Reset functions |
|
ntp |
Network Time Protocol |
|
session |
Clear the ntp configuration session |
clear ntp statistics { all-peers | io | local | memory }
Syntax Description
|
clear |
Reset functions |
|
ntp |
Network Time Protocol |
|
statistics |
Clear NTP Statistics |
|
all-peers |
Clear per-peer statistics counter of all peers |
|
io |
Clear input-output statistics |
|
local |
Clear counters maintained by the local NTP |
|
memory |
Clear statistics counters related to memory code |
clear nve peers <addr> interface <nve-if>counters
Syntax Description
|
clear |
Reset functions |
|
nve |
Configure NVE information |
|
peers |
NVE Peer |
|
addr |
Remote Peer IP Address |
|
interface |
Interface |
clear nve peers history-log
Syntax Description
|
clear |
Reset functions |
|
nve |
Configure NVE information |
|
peers |
NVE Peer |
|
history-log |
nve_clear_peers_history_log_cmd |
clear nve vni { <vni-id> | all } counters
Syntax Description
|
clear |
Reset functions |
|
nve |
Configure NVE information |
|
vni |
Virtual Network Identifier |
|
vni-id |
Virtual Network Identifier |
|
counters |
Counters |
|
all |
Clear counters for all vnis |
clear nvram
Syntax Description
|
clear |
Reset functions |
|
nvram |
purge NVRAM |
clear onep error
Syntax Description
|
clear |
Reset functions |
|
onep |
One Platform |
|
error |
Clear the ONE-P error buffer |
clear onep history { { archived } | { all } | { session { all | <onep-session-id> } } }
Syntax Description
|
clear |
Reset functions |
|
onep |
One Platform |
|
history |
One Platform history trails |
|
archived |
One Platform archived session |
|
session |
One Platform session |
|
all |
All sessions |
|
onep-session-id |
Specific session name |
clear onep session rate-limit
Syntax Description
|
clear |
Reset functions |
|
onep |
One Platform |
|
session |
One Platform session |
|
rate-limit |
rate limiting feature info |
clear onep statistics [ session { all | <onep-session-id> } ]
Syntax Description
|
clear |
Reset functions |
|
onep |
One Platform |
|
statistics |
statistics |
|
session |
(Optional) One Platform session |
|
all |
(Optional) All sessions |
|
onep-session-id |
(Optional) Specific session name |
clear onep trace
Syntax Description
|
clear |
Reset functions |
|
onep |
One Platform |
|
trace |
Clear the ONE-P trace buffer |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
traffic |
Clear traffic counters |
|
interface |
(Optional) Interface to clear all traffic on |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
statistics |
Clear statistics counters |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] policy statistics { { redistribute { bgp <as> | { eigrp | isis | rip } <tag> | static | direct | amt | lisp } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Display OSPFv3 status and configuration |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
policy |
Clear Policy related information |
|
statistics |
Display Route Filter statistics |
|
redistribute |
Statistics for redistribution |
|
eigrp |
Enhanced Interior Gateway Protocol (EIGRP) |
|
rip |
Routing Information Protocol (RIP) |
|
isis |
ISO Intermediate-to-Intermediate (IS-IS) |
|
bgp |
Border Gateway Protocol (BGP) |
|
as |
Autonomous system number |
|
static |
Static |
|
direct |
Directly connected |
|
amt |
AMT anycast prefix |
|
lisp |
LISP EID-prefixes |
|
area |
Configure area properties |
|
area-id-ip |
Area Id as an integer or ip address |
|
filter-list |
Filter prefixes between OSPF areas |
|
in |
Filter networks sent to this area |
|
out |
Filter networks sent from this area |
|
tag |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbor { * | <neighborid> | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
neighbor |
Clear one or more neighbors |
|
* |
Clear all neighbors |
|
neighborid |
Source IP address, or router ID of the neighbor |
|
interface |
Interface to clear all neighbors on |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] internal interface-cache [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
internal |
Commands for internal use |
|
interface-cache |
Interface-cache |
|
interface |
(Optional) Interface to clear the interface-cache on |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface { * | <interface> } [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
interface |
Clear one or more interfaces |
|
* |
Clear all interfaces |
|
interface |
Interface to clear |
clear ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
database |
Clear the LSDB and all neighbors |
clear ospfv3 [ <tag> ] redistribution [ vrf { <vrf-name> | <vrf-known-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
ospfv3 |
Clear OSPF tables |
|
tag |
(Optional) Process tag |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
redistribution |
Clear OSPFv3 route redistribution |
clear otv arp-nd [ <l3_addr> ]
Syntax Description
|
clear |
Reset functions |
|
otv |
OTV events |
|
arp-nd |
Log ARP/ND caching clear |
|
l3_addr |
(Optional) L3 IP address |
clear otv isis [ <otv-isis-tag> ] internal perf timer
Syntax Description
|
clear |
Reset functions |
|
otv |
Display OTV information |
|
isis |
Display IS-IS status and configuration |
|
otv-isis-tag |
(Optional) Routing process tag |
|
internal |
Commands for internal use |
|
perf |
Performance |
|
timer |
Timer performance |
clear otv isis [ <otv-isis-tag> ] [ ip ] route-map statistics [ vpn { <vrf-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
otv |
Clear OTV commands |
|
isis |
Clear IS-IS information |
|
otv-isis-tag |
(Optional) Routing process tag |
|
vpn |
(Optional) Display VPN information |
|
vrf-name |
(Optional) VPN name |
|
all |
(Optional) All configured VPNs |
|
ip |
(Optional) Clear IS-IS IPv4 information |
|
route-map |
Clear IS-IS route-map information |
|
statistics |
Clear IS-IS route-map statistics |
clear otv isis [ <otv-isis-tag> ] statistics { * | <interface> } [ vpn { <vrf-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
otv |
Clear OTV commands |
|
isis |
Clear IS-IS information |
|
otv-isis-tag |
(Optional) Routing process tag |
|
vpn |
(Optional) Display VPN information |
|
vrf-name |
(Optional) VPN name |
|
all |
(Optional) All configured VPNs |
|
statistics |
Clear IS-IS protocol statistics |
|
* |
All IS-IS protocol statistics |
|
interface |
IS-IS interface |
clear otv isis [ <otv-isis-tag> ] traffic { * | <interface> } [ vpn { <vrf-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
otv |
Clear OTV commands |
|
isis |
Clear IS-IS information |
|
otv-isis-tag |
(Optional) Routing process tag |
|
vpn |
(Optional) Display VPN information |
|
vrf-name |
(Optional) VPN name |
|
all |
(Optional) All configured VPNs |
|
traffic |
Clear IS-IS traffic information |
|
* |
All IS-IS traffic information |
|
interface |
IS-IS interface |
clear otv isis [ <otv-isis-tag> ] adjacency { * | { <interface> | system-id <sid> } } [ vpn { <vrf-name> | all } ]
Syntax Description
|
clear |
Reset functions |
|
otv |
Clear OTV commands |
|
isis |
Clear IS-IS information |
|
otv-isis-tag |
(Optional) Routing process tag |
|
vpn |
(Optional) Display VPN information |
|
vrf-name |
(Optional) VPN name |
|
all |
(Optional) All configured VPNs |
|
adjacency |
Clear IS-IS adjacency state |
|
* |
IS-IS adjacencies on all interfaces |
|
interface |
IS-IS interface |
|
system-id |
Hostname or System ID |
|
sid |
Hostname or System ID (in the form of XXXX.XXXX.XXXX) |
clear otv isis [ <isis-tag> ] event-history [ <isis-event-hist-buf-name> ]
Syntax Description
|
clear |
Reset functions |
|
otv |
Clear OTV commands |
|
isis |
Clear IS-IS information |
|
isis-tag |
(Optional) Routing process tag |
|
event-history |
Clear event history buffers |
|
isis-event-hist-buf-name |
(Optional) Clear the specific event history buffer |
clear otv isis [ <otv-isis-tag> ] internal packet queue counters
Syntax Description
|
clear |
Reset functions |
|
otv |
Display OTV information |
|
isis |
Display IS-IS status and configuration |
|
otv-isis-tag |
(Optional) Routing process tag |
|
internal |
Commands for internal use |
|
packet |
Packet counters |
|
queue |
Packet queue counters |
|
counters |
Clear packet queue max counters |
clear pktmgr cache { { interface [ <intf> ] } | { vlan [ <vl> ] } }
Syntax Description
|
clear |
Reset functions |
|
pktmgr |
Clear Packet Manager information |
|
cache |
Clear pktmgr cache |
|
interface |
Clear pktmgr related interface information |
|
vlan |
Clear pktmgr related vlan information |
|
intf |
(Optional) Interface name to clear |
|
vl |
(Optional) Vlan |
clear pktmgr client [ <uuid> ]
Syntax Description
|
clear |
Reset functions |
|
pktmgr |
Clear Packet Manager information |
|
client |
Clear pktmgr clients counters |
|
uuid |
(Optional) Clear pktmgr client counters for given uuid |
clear pktmgr interface [ <interface> ]
Syntax Description
|
clear |
Reset functions |
|
pktmgr |
Clear Packet Manager information |
|
interface |
Clear pktmgr related interface information |
|
interface |
(Optional) Interface name to display |
clear port-profile command-cache [ interface <intfname> ]
Syntax Description
|
clear |
Reset functions |
|
port-profile |
Clear port-profiles |
|
command-cache |
Clear port-profile command cache |
|
interface |
(Optional) Name of interface |
|
intfname |
(Optional) Name of interface |
clear port-profile database
Syntax Description
|
clear |
Reset functions |
|
port-profile |
Clear port-profiles |
|
database |
Clear port-profile database |
clear port-security dynamic address <mac-address> vlan <vlanid>
Syntax Description
|
clear |
Reset functions |
|
port-security |
Clear port-security information |
|
dynamic |
dynamic addresses |
|
address |
secure address |
|
mac-address |
48 bit mac address |
|
vlan |
vlan information |
|
vlanid |
vlan id. Enter a value between 1 and 4094 |
clear port-security dynamic interface <if_index> [ vlan <vlanid> ]
Syntax Description
|
clear |
Reset functions |
|
port-security |
Clear port-security information |
|
dynamic |
dynamic addresses |
|
interface |
interface |
|
if_index |
ethernet |
|
vlan |
(Optional) vlan information |
|
vlanid |
(Optional) vlan id. Enter a value between 1 and 4094 |
clear port-security nvram
Syntax Description
|
clear |
Reset functions |
|
port-security |
Clear port-security information |
|
nvram |
port-security nvram |
clear port-security nvram force
Syntax Description
|
clear |
Reset functions |
|
port-security |
Clear port-security information |
|
nvram |
port-security nvram |
|
force |
force clear |
clear processes log all
Syntax Description
|
clear |
Reset functions |
|
processes |
process-related clear commands |
|
log |
Delete log files |
|
all |
Delete all the log files |
clear processes log all vdc-all
Syntax Description
|
clear |
Reset functions |
|
processes |
process-related clear commands |
|
log |
Delete log files |
|
all |
Delete all the log files |
|
vdc-all |
Delete all the log files in all vdcs |
clear processes log archive [ file <s0> ]
Syntax Description
|
clear |
Reset functions |
|
processes |
system manager spawned processes |
|
log |
Delete log files |
|
archive |
clear all process logs for this vdc from logflash on this module |
|
file |
(Optional) delete a log file on logflash |
|
s0 |
(Optional) Name of file in directory 'log |
clear processes log pid <i0>
Syntax Description
|
clear |
Reset functions |
|
processes |
process-related clear commands |
|
log |
Delete log files |
|
pid |
Delete log file of a specific process |
|
i0 |
pid of the process |
clear processes vdc <e-vdc2> log all
Syntax Description
|
clear |
Reset functions |
|
processes |
process-related clear commands |
|
vdc |
process-related clear commands in vdc |
|
e-vdc2 |
Enter Virtual Device Context <vdc-id> |
|
log |
Delete log files |
|
all |
Delete all the log files |
clear processes vdc <e-vdc2> log pid <i1>
Syntax Description
|
clear |
Reset functions |
|
processes |
process-related clear commands |
|
vdc |
process-related clear commands in vdc |
|
e-vdc2 |
Enter Virtual Device Context <vdc-id> |
|
log |
Delete log files |
|
pid |
Delete log file of a specific process |
|
i1 |
pid of the process |
clear ptp counters { interface <if0> | all }
Syntax Description
|
clear |
Reset functions |
|
ptp |
Precision Time Protocol (IEEE 1588) Subsystem |
|
counters |
Display PTP packet counters |
|
interface |
Enter the port interface |
|
all |
Displays all information |
|
if0 |
clear qos mpls-snmp
Syntax Description
|
clear |
Reset functions |
|
mpls-snmp |
MPLS default table-map and snmp indices in pss |
clear qos policies
Syntax Description
|
clear |
Reset functions |
|
policies |
Clear default policies |
clear qos policies force
Syntax Description
|
clear |
Reset functions |
|
policies |
Clear default policies |
|
force |
Clear forcefully |
clear qos statistics [ { interface [ <iface-list> ] | vlan [ <vlan-list> ] } [ input | output ] [ type <qos-or-q> ] ]
Syntax Description
|
clear |
Reset functions |
|
statistics |
Clear statistics |
|
interface |
(Optional) Clear statistics on a interface |
|
iface-list |
(Optional) List of Interfaces |
|
vlan |
(Optional) 802.1Q vlan |
|
vlan-list |
(Optional) List of vlan ids |
|
input |
(Optional) Input Service policy |
|
output |
(Optional) Output Service policy |
|
type |
(Optional) Policy type |
|
qos-or-q |
(Optional) |
clear radius-server statistics <host0> [ __readonly__ ]
Syntax Description
|
clear |
Reset functions |
|
radius-server |
Clear RADIUS related parameters |
|
statistics |
Clear RADIUS statistics |
|
host0 |
DNS name or IP address |
|
__readonly__ |
(Optional) |
clear radius session
Syntax Description
|
clear |
Reset functions |
|
radius |
clear to be commited RADIUS config and lock in fabric |
|
session |
clear to be commited RADIUS config and lock in fabric |
clear rmon { alarms | events | logs | hcalarms | all-alarms }
Syntax Description
|
clear |
Reset functions |
|
rmon |
Clear RMON tables |
|
alarms |
Clear all 32 bit alarms |
|
events |
Clear rmon log this also clears rmon event table |
|
logs |
Clear rmon log |
|
hcalarms |
Clear all 64 bit rmon alarms |
|
all-alarms |
Clear all 32 bit and 64 bit rmon alarms |
clear route-map { <route-map-name> | <route-map-cfg-name> } pbr-statistics
Syntax Description
|
clear |
Reset functions |
|
route-map |
Route-map used for PBR |
|
route-map-name |
|
|
route-map-cfg-name |
|
|
pbr-statistics |
Statistics for policy based routing |
clear routing [ ip | ipv4 ] [ unicast ] event-history { add-route | cli | delete-route | detail | errors | general | ha | loop-detection | modify-route | notifications | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary }
Syntax Description
|
clear |
Reset functions |
|
routing |
Clear routing information |
|
ip |
(Optional) Clear IP commands |
|
ipv4 |
(Optional) Clear IP commands |
|
unicast |
(Optional) Clear unicast information |
|
event-history |
Clear routing event log |
|
add-route |
Add route |
|
cli |
CLI |
|
delete-route |
Delete route |
|
detail |
Detail |
|
errors |
Errors |
|
general |
General |
|
ha |
HA |
|
loop-detection |
Loop detection |
|
modify-route |
Modify route |
|
notifications |
Notification |
|
recursive-next-hop |
Recursive next hop |
|
summary |
Summary |
|
ufdm |
UFDM |
|
ufdm-detail |
UFDM Detail |
|
ufdm-summary |
UFDM Summary |
clear routing [ ip | ipv4 ] [ unicast ] memstats
Syntax Description
|
clear |
Reset functions |
|
routing |
Clear routing information |
|
ip |
(Optional) Clear IP commands |
|
ipv4 |
(Optional) Clear IP commands |
|
unicast |
(Optional) Display unicast information |
|
memstats |
Clear urib memory statistics |
clear routing ipv6 [ unicast ] event-history { <u6rib-event-hist> | <u6rib-event-hist-hid> }
Syntax Description
|
clear |
Reset functions |
|
routing |
Clear routing information |
|
ipv6 |
Clear IPv6 commands |
|
unicast |
(Optional) Clear unicast information |
|
event-history |
Clear routing event log |
|
u6rib-event-hist |
Clear routing event log |
|
u6rib-event-hist-hid |
Clear routing event log |
clear rpm pss { running | startup | all }
Syntax Description
|
clear |
Reset functions |
|
rpm |
Route Policy Manager (RPM) |
|
pss |
Clear PSS related information |
|
running |
Clear the running PSS commands configuration |
|
startup |
Clear the startup PSS commands configuration |
|
all |
Clear all PSS commands configurarion |
clear scheduler logfile
Syntax Description
|
clear |
Reset functions |
|
scheduler |
Scheduler clear commands |
|
logfile |
Clear scheduler log file |
clear screen
Syntax Description
|
clear |
Reset functions |
|
screen |
Clear screen |
clear service module slot <slot-no> password
Syntax Description
|
clear |
clear functions |
|
service |
service module |
|
module |
module |
|
slot |
slot id |
|
slot-no |
slot |
|
password |
Reset svc-module passsword |
clear session state name <s4>
Syntax Description
|
clear |
Reset functions |
|
session |
Reset confg session internals |
|
state |
Reset confg session internal state |
|
name |
Reset confg session internal state for a given name |
|
s4 |
Enter the name of the session |
clear sflow statistics
Syntax Description
|
clear |
Reset functions |
|
sflow |
sFlow global configuration |
|
statistics |
Clear sFlow statistics |
clear snmp counters
Syntax Description
|
clear |
Reset functions |
|
snmp |
Clear SNMP Tables |
|
counters |
Clear SNMP counters |
clear snmp hostconfig
Syntax Description
|
clear |
Reset functions |
|
snmp |
Clear SNMP Tables |
|
hostconfig |
Clear SNMP Host List |
clear sockets statistics { all | tcp | tcp6 | udp | udp6 | raw | raw6 }
Syntax Description
|
clear |
Reset functions |
|
sockets |
Clear sockets statistics |
|
statistics |
Clear sockets statistics |
|
all |
Clear TCP/UDP/RAW v4/v6 statistics |
|
tcp |
Clear TCP v4 statistics |
|
tcp6 |
Clear TCP v6 statistics |
|
udp |
Clear UDP v4 statistics |
|
udp6 |
Clear UDP v6 statistics |
|
raw |
Clear RAW v4 statistics |
|
raw6 |
Clear RAW v6 statistics |
clear spanning-tree counters [ interface <interface-id> | vlan <vlan-id> | bridge-domain <bd-id> ]
Syntax Description
|
clear |
Reset functions |
|
spanning-tree |
Spanning Tree Subsystem |
|
counters |
Clear spanning tree statistics |
|
interface |
(Optional) Specify an interface as a target for the command |
|
interface-id |
(Optional) Specify an interface as a target for the command |
|
vlan |
(Optional) VLAN Switch Spanning Trees |
|
bridge-domain |
(Optional) Bridge-Domain Switch Spanning Trees |
|
vlan-id |
(Optional) vlan range, Example: 1,3-5,7,9-11 |
|
bd-id |
(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11 |
clear spanning-tree detected-protocols [ interface <interface-id> ]
Syntax Description
|
clear |
Reset functions |
|
spanning-tree |
Spanning Tree Subsystem |
|
detected-protocols |
Restart the protocol migration process |
|
interface |
(Optional) Specify an interface as a target for the command |
|
interface-id |
(Optional) Specify an interface as a target for the command |
clear spanning-tree sps-hist
Syntax Description
|
clear |
Reset functions |
|
spanning-tree |
Spanning Tree Subsystem |
|
sps-hist |
Set port state stats |
clear ssh hosts
Syntax Description
|
clear |
Reset functions |
|
ssh |
Clear ssh values |
|
hosts |
Clear the list of trusted ssh hosts |
clear system internal forwarding pd-history
Syntax Description
|
clear |
Clear bintrace entries |
|
system |
System-related show commands |
|
internal |
Commands for internal use |
|
forwarding |
forwarding |
|
pd-history |
MFDM DI history |
clear system internal forwarding pd-history bitmask
Syntax Description
|
clear |
Clear bintrace entries |
|
system |
System-related show commands |
|
internal |
Commands for internal use |
|
forwarding |
forwarding |
|
pd-history |
MFDM DI history |
|
bitmask |
Bitmask |
clear system internal forwarding unicast counters
Syntax Description
|
clear |
Show running system information |
|
system |
System-related show commands |
|
internal |
Commands for internal use |
|
forwarding |
Show fib information |
|
unicast |
show unicast information |
|
counters |
Show mpls pd counters |
clear system internal iscm packet-stats service { all | name <service-name> }
Syntax Description
|
clear |
Reset functions |
|
system |
System-related show commands |
|
internal |
Clear iscm internal |
|
iscm |
Clear iscm feature |
|
packet-stats |
Rise packet statistics |
|
service |
Rise service |
|
all |
Clear all rise services |
|
name |
Specify rise service name |
|
service-name |
Service name |
clear system internal npacl event-history { acl | ppf | cli | internal | all } [ dump-to-file ]
Syntax Description
|
clear |
Reset functions |
|
system |
system |
|
internal |
Commands for internal use |
|
npacl |
Configure NPACL feature |
|
event-history |
event history |
|
acl |
Clear acl policy history |
|
ppf |
Clear ppf interaction history |
|
cli |
Clear cli history |
|
internal |
Clear internal |
|
all |
Clear all history buffers |
|
dump-to-file |
(Optional) Dump the npacl event history logs into the file |
clear system internal orib event-history [ <orib-event-hist-buf-name> ] [ verbose ]
Syntax Description
|
clear |
Reset functions |
|
system |
Clear logs in system |
|
internal |
Commands for internal use |
|
orib |
Clear ORIB commands |
|
event-history |
ORIB event logs |
|
orib-event-hist-buf-name |
(Optional) Event history buffer |
|
verbose |
(Optional) Do not add per route info into buffer |
clear system reset-reason
Syntax Description
|
clear |
Reset functions |
|
system |
Clear logs in system |
|
reset-reason |
Clear reset-reason logs in the system |
clear system reset-reason history
Syntax Description
|
clear |
Reset functions |
|
system |
Clear logs in system |
|
reset-reason |
Clear reset-reason logs in the system |
|
history |
Clear reset-reason history logs in the system |
clear tacacs-server statistics <host0> [ __readonly__ ]
Syntax Description
|
clear |
Reset functions |
|
tacacs-server |
Clear TACACS related parameters |
|
statistics |
Clear TACACS statistics |
|
host0 |
DNS name or IP address |
|
__readonly__ |
(Optional) |
clear tech-support lock
Syntax Description
|
clear |
Reset functions |
|
tech-support |
Gather information for troubleshooting |
|
lock |
Clear the lock which prohibits multiple show techs to run in parallel |
clear tech-support lock
Syntax Description
|
clear |
Reset functions |
|
tech-support |
Gather information for troubleshooting |
|
lock |
Clear the lock which prohibits multiple show techs to run in parallel |
clear track internal info counters
Syntax Description
|
clear |
Reset functions |
|
track |
Clear track information |
|
internal |
Clear internal track information |
|
info |
Clear internal data structure information |
|
counters |
Clear track counters information |
clear user <s0>
Syntax Description
|
clear |
Reset functions |
|
user |
Logout a particular user |
|
s0 |
Enter the username |
clear veobc counters
Syntax Description
|
clear |
Reset function |
|
veobc |
Reset the veobc counters |
|
counters |
Reset the veobc statistic counters to zero |
clear vlan [ id <vlan-id> ] counters
Syntax Description
|
clear |
Reset functions |
|
vlan |
Vlan commands |
|
id |
(Optional) clear VLAN counters by VLAN id |
|
vlan-id |
(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19 |
|
counters |
display counters |
clear vlan access-list counters [ <name> ]
Syntax Description
|
clear |
Reset functions |
|
vlan |
Vlan commands |
|
access-list |
Clear access list statistical information |
|
counters |
Clear access list counters |
|
name |
(Optional) List name |
clear vmtracker counters
Syntax Description
|
clear |
Clear |
|
vmtracker |
Clear vmtracker info |
|
counters |
Clear vmtracker counter info |
clear vpc statistics { vpc <vpc_num> | peer-link }
Syntax Description
|
clear |
Reset functions |
|
vpc |
Statistics for a specific vPC |
|
statistics |
Statistics |
|
vpc_num |
Virtual Port Channel number |
|
peer-link |
stats for peer-link |
clear vpc statistics all
Syntax Description
|
clear |
Reset functions |
|
vpc |
Virtual Port Channel configuration |
|
statistics |
Statistics |
|
all |
All vPC statistics |
clear vpc statistics peer-keepalive
Syntax Description
|
clear |
Reset functions |
|
vpc |
Virtual Port Channel configuration |
|
statistics |
Statistics |
|
peer-keepalive |
peer keepalive module related statistics |
clear vpc transport statistics [ __readonly__ ]
Syntax Description
|
clear |
Reset functions |
|
vpc |
Virtual Port Channel configuration |
|
transport |
cfs transport |
|
statistics |
Statistics |
|
__readonly__ |
(Optional) Read Only |
clear vrrp statistics [ interface <intf_num> ] [ vr <vr_id> ]
Syntax Description
|
clear |
Reset functions |
|
vrrp |
Clear virtual router |
|
statistics |
Clear global virtual router statistics |
|
interface |
(Optional) Select interface |
|
intf_num |
(Optional) |
|
vr |
(Optional) [1-255] clear virtual router statistics |
|
vr_id |
(Optional) |
clear vrrpv3 statistics [ <interface_num> [ <group_num> ] ] [ <opt_v4_or_v6> ]
Syntax Description
|
clear |
Reset functions |
|
vrrpv3 |
VRRPv3 Clear commands |
|
statistics |
VRRPV3 statistics |
|
interface_num |
(Optional) Interface |
|
group_num |
(Optional) Group number |
|
opt_v4_or_v6 |
(Optional) Enter ipv4 or ipv6 |
clear xl
Syntax Description
|
clear |
Reset functions |
|
xl |
{ cli alias name <s0> <line> | no cli alias name <s0> [ <line> ] }
Syntax Description
|
no |
Negate a command or set its defaults |
|
cli |
Configure CLI commands |
|
alias |
Define an alias |
|
name |
Specify the alias |
|
s0 |
Alias command |
|
line |
Alias definition |
cli no var name <s0>
Syntax Description
|
cli |
CLI commands |
|
no |
Negate a command or set its defaults |
|
var |
Unset a variable |
|
name |
Specify a variable name |
|
s0 |
Variable name |
cli reload parsetree
Syntax Description
|
cli |
|
|
reload |
|
|
parsetree |
cli show running-config local
Syntax Description
|
cli |
|
|
show |
|
|
running-config |
|
|
local |
{ cli var name <s0> <line> | no cli var name <s0> [ <line> ] }
Syntax Description
|
no |
Negate a command or set its defaults |
|
cli |
Configure CLI commands |
|
var |
Define a variable |
|
name |
Specify a variable name |
|
s0 |
Variable name |
|
line |
Variable value |
[no] cli var name <s0>
Syntax Description
|
no |
Negate a command or set its defaults |
|
cli |
CLI commands |
|
var |
Unset a variable |
|
name |
Specify a variable name |
|
s0 |
Variable name |
cli var name <s0> <line>
Syntax Description
|
cli |
CLI commands |
|
var |
Define a variable |
|
name |
Specify a variable name |
|
s0 |
Variable name |
|
line |
Variable value |
[no] cli verifynrun
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cli |
CLI commands |
|
verifynrun |
Verify and run |
[no] client-to-client reflection
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
client-to-client |
Configure client-to-client route reflection |
|
reflection |
reflection of routes permitted |
{ { no | default } clock-tolerance | clock-tolerance ntp oneway { absolute <abs-value> | percent <percentage> } }
Syntax Description
|
no |
|
|
clock-tolerance |
ntp |
|
default |
Set a command to its defaults |
|
clock-tolerance |
Set acceptable clock synchronization error |
|
ntp |
Acceptable clock synchronization error due to NTP |
|
oneway |
Acceptable clock synchronization error in oneway measurement |
|
absolute |
Acceptable error in microseconds |
|
percent |
Acceptable error as percent of value measured |
|
abs-value |
Number in microseconds |
|
percentage |
Percentage of one-way delay |
{ clock { summer-time <s0> [ <i0> <s1> <s2> <s3> <i1> <s4> <s5> <s6> [ <i2> ] ] | timezone <s7> <i3> <i4> } | no clock { summer-time [ <s0> <i0> <s1> <s2> <s3> <i1> <s4> <s5> <s6> <i2> ] | timezone [ <s7> <i3> <i4> ] } }
Syntax Description
|
no |
Negate a command or set its defaults |
|
clock |
Clock |
|
summer-time |
Configure summer (daylight savings) time |
|
s0 |
Name of time zone in summer, such as PDT, CDT, EDT, etc.. |
|
i0 |
(Optional) Week number to start (first week=1, last week=5) |
|
s1 |
(Optional) Weekday to start |
|
s2 |
(Optional) Month to start |
|
s3 |
(Optional) HH:MM Time to start |
|
i1 |
(Optional) Week number to end (first week=1, last week=5) |
|
s4 |
(Optional) Weekday to end |
|
s5 |
(Optional) Month to end |
|
s6 |
(Optional) HH:MM Time to end |
|
i2 |
(Optional) Offset to add in minutes |
|
timezone |
Configure time zone |
|
s7 |
Name of time zone, such as PST, MST, CST, EST, etc.. |
|
i3 |
Hours offset from UTC |
|
i4 |
Minutes offset from UTC |
[no] clock format { 12-hours | 24-hours }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
clock |
Clock |
|
format |
Display format of clock |
|
12-hours |
12 hours display |
|
24-hours |
24 hours display |
[no] clock format show-timezone syslog
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
clock |
Clock |
|
format |
Display format of clock |
|
show-timezone |
Display the configured timezone |
|
syslog |
Display the configured timezone in syslogs |
[no] clock protocol { ntp | ptp | none } vdc <vdc-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
clock |
Clock |
|
protocol |
protocol |
|
ntp |
ntp |
|
ptp |
ptp |
|
none |
none (clock can be set manually) |
|
vdc |
vdc |
|
vdc-id |
vdc-id |
clock set <s0> <i0> { April <i1> | August <i2> | December <i3> | February <i4> | January <i5> | July <i6> | June <i7> | March <i8> | May <i9> | November <i10> | October <i11> | September <i12> }
Syntax Description
|
clock |
Clock |
|
set |
HH:MM:SS Current Time |
|
s0 |
HH:MM:SS Current Time |
|
i0 |
Day of the month |
|
April |
Month of the year |
|
i1 |
Enter the year (no abbreviation) |
|
August |
Month of the year |
|
i2 |
Enter the year (no abbreviation) |
|
December |
Month of the year |
|
i3 |
Enter the year (no abbreviation) |
|
February |
Month of the year |
|
i4 |
Enter the year (no abbreviation) |
|
January |
Month of the year |
|
i5 |
enter the year (no abbreviation) |
|
July |
Month of the year |
|
i6 |
Enter the year (no abbreviation) |
|
June |
Month of the year |
|
i7 |
Enter the year (no abbreviation) |
|
March |
Month of the year |
|
i8 |
Enter the year (no abbreviation) |
|
May |
Month of the year |
|
i9 |
Enter the year (no abbreviation) |
|
November |
Month of the year |
|
i10 |
Enter the year (no abbreviation) |
|
October |
Month of the year |
|
i11 |
Enter the year (no abbreviation) |
|
September |
Month of the year |
|
i12 |
Enter the year (no abbreviation) |
[no] clock sync-interval <intv>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
clock |
Clock |
|
sync-interval |
sync-interval in seconds |
|
intv |
interval |
[no] cluster-id { <ip-cluster-id> | <int-cluster-id> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cluster-id |
Configure Route Reflector Cluster-ID |
|
ip-cluster-id |
Cluster-id as an IP address |
|
int-cluster-id |
Cluster-id as a 32 bit quantity |
[no] collect counter { bytes | packets } [ long ]
Syntax Description
|
collect |
Specify a non-key field |
|
counter |
Counters to collect |
|
bytes |
Total number of bytes |
|
packets |
Total number of packets |
|
long |
(Optional) Long counter (64 bits) |
[no] collect flow sampler id
Syntax Description
|
collect |
Specify a non-key field |
|
flow |
Flow identifying fields |
|
sampler |
Sampler |
|
id |
Identifer for sampler used for the flow |
[no] collect ip version
Syntax Description
|
collect |
Specify a non-key field |
|
ip |
IP attributes |
|
version |
IPv4 or IPv6 |
[no] collect routing destination as [ peer ]
Syntax Description
|
collect |
Specify a non-key field |
|
routing |
Routing attributes |
|
destination |
AS destination |
|
as |
Destination AS number of origin network |
|
peer |
(Optional) Destination AS number of the peer network |
[no] collect routing forwarding-status
Syntax Description
|
collect |
Specify a non-key field |
|
routing |
Routing attributes |
|
forwarding-status |
Forwarding status of the packet |
[no] collect routing next-hop address ipv4 [ bgp ]
Syntax Description
|
collect |
Specify a non-key field |
|
routing |
Routing attributes |
|
next-hop |
Next hop address |
|
address |
Address |
|
ipv4 |
IPv4 next hop address |
|
bgp |
(Optional) BGP next hop IPv4 address |
[no] collect routing next-hop address ipv6 [ bgp ]
Syntax Description
|
collect |
Specify a non-key field |
|
routing |
Routing attributes |
|
next-hop |
Next hop address |
|
address |
Address |
|
ipv6 |
IPv6 next hop address |
|
bgp |
(Optional) BGP next hop IPv6 address |
[no] collect routing source as [ peer ]
Syntax Description
|
collect |
Specify a non-key field |
|
routing |
Routing attributes |
|
source |
AS source |
|
as |
AS source |
|
peer |
(Optional) Source AS number of the peer network |
[no] collect timestamp sys-uptime { first | last }
Syntax Description
|
collect |
Specify a non-key field |
|
timestamp |
Timestamp fields |
|
sys-uptime |
System uptime |
|
first |
Time the first packet was seen |
|
last |
Time the most recent packet was seen |
[no] collect transport tcp flags
Syntax Description
|
collect |
Specify a non-key field |
|
transport |
Transport layer fields |
|
tcp |
TCP layer fields |
|
flags |
TCP flags |
commit
Syntax Description
|
commit |
Commit the current configuration session |
commit verbose
Syntax Description
|
commit |
Commit the current configuration session |
|
verbose |
Commit the current configuration session with more details |
[no] compress-bitfields ipv6 multicast
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
compress-bitfields |
Compress bitfields for improved memory utilization |
|
ipv6 |
Use for IPv6 multicast |
|
multicast |
Use compressed bitfields for M6RIB and PIM6 |
[no] confederation identifier <confed-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
confederation |
AS confederation parameters |
|
identifier |
Set routing domain confederation AS |
|
confed-id |
AS number |
[no] confederation peers <confed-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
confederation |
AS confederation parameters |
|
peers |
Peer ASs in BGP confederation |
|
confed-id |
AS number |
configure [ terminal ]
Syntax Description
|
configure |
Enter configuration mode |
|
terminal |
(Optional) Configure the system from terminal input |
[no] configure maintenance profile { normal-mode | maintenance-mode }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
configure |
Enter configuration mode |
|
maintenance |
maintenance profile mode |
|
profile |
maintenance profile |
|
normal-mode |
Normal mode profile |
|
maintenance-mode |
Maintenance mode profile |
configure session <s0>
Syntax Description
|
configure |
Enter configuration mode |
|
session |
Configure the system in a session |
|
s0 |
Enter the name of the session |
[no] congestion-control ecn
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
congestion-control |
Congestion Control Protocol |
|
ecn |
Enable ECN protocol |
[no] congestion-control random-detect { [ threshold { burst-optimized | mesh-optimized } ] | { minimum-threshold <min-thresh> [ packets | bytes | kbytes | mbytes ] maximum-threshold <max-thresh> [ packets1 | bytes1 | kbytes1 | mbytes1 ] drop-probability <drop-prob> } } { [ ecn ] }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
congestion-control |
Congestion Control Protocol |
|
random-detect |
Enable WRED protocol |
|
threshold |
(Optional) Threshold |
|
minimum-threshold |
Minimum Threshold |
|
maximum-threshold |
Maximum Threshold |
|
burst-optimized |
(Optional) Threshold optimized for bursty traffic |
|
mesh-optimized |
(Optional) Threshold optimized for mesh traffic |
|
drop-probability |
Drop Probability at Maximum Threshold |
|
drop-prob |
Drop Probability Value |
|
packets |
(Optional) Packets |
|
bytes |
(Optional) Bytes |
|
kbytes |
(Optional) Kilo Bytes |
|
mbytes |
(Optional) Mega Bytes |
|
packets1 |
(Optional) Packets |
|
bytes1 |
(Optional) Bytes |
|
kbytes1 |
(Optional) Kilo Bytes |
|
mbytes1 |
(Optional) Mega Bytes |
|
ecn |
(Optional) Explicit Congestion Notification |
[no] congestion-control random-detect global-buffer minimum-threshold { <min-thresh> [ packets | bytes | kbytes | mbytes ] } maximum-threshold { <max-thresh> [ packets1 | bytes1 | kbytes1 | mbytes1 ] }
Syntax Description
|
no |
(Optional) Negate the command |
|
congestion-control |
Congestion control protocol |
|
random-detect |
Enable WRED protocol |
|
global-buffer |
global buffer threshold |
|
minimum-threshold |
Specify minimum threshold for WRED |
|
min-thresh |
Minimum threshold value |
|
maximum-threshold |
Specify maximum threshold for WRED |
|
max-thresh |
Maximum threshold value |
|
packets |
(Optional) Packets |
|
bytes |
(Optional) Bytes |
|
kbytes |
(Optional) Kilo bytes |
|
mbytes |
(Optional) Mega bytes |
|
packets1 |
(Optional) Packets |
|
bytes1 |
(Optional) Bytes |
|
kbytes1 |
(Optional) Kilo Bytes |
|
mbytes1 |
(Optional) Mega Bytes |
[no] congestion-control tail-drop [ threshold { burst-optimized | mesh-optimized } ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
congestion-control |
Congestion Control Protocol |
|
tail-drop |
Enable Tail-Drop |
|
threshold |
(Optional) Threshold |
|
burst-optimized |
(Optional) Threshold optimized for bursty traffic |
|
mesh-optimized |
(Optional) Threshold optimized for mesh traffic |
[no] connect
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
connect |
Connect to remote host |
{ continue <seq> } | { no continue [ <seq> ] }
Syntax Description
|
no |
Negate a command or set its defaults |
|
continue |
Continue on a different entry within the route-map |
|
seq |
Route-map entry sequence number |
{ contract-id <s0> | no contract-id }
Syntax Description
|
no |
Negate a command or set its defaults |
|
contract-id |
Service contract id of the customer |
|
s0 |
Provide contract number (as specified in the service agreement) |
control-plane
Syntax Description
|
control-plane |
Enter to control-plane sub-mode |
[no] control vlan <vlan-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
control |
ITD control vlan |
|
vlan |
control vlan |
|
vlan-id |
Control vlan id |
controller tech-support <dest_uri>
Syntax Description
|
controller |
Gather logs for Controller troubleshooting |
|
tech-support |
Gather information for troubleshooting |
|
dest_uri |
A compressed tarball will be created with .tar.gz extension applied to the file name |
[no] controller type l2-vxlan identifier <controller-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
controller |
Controller command |
|
type |
Controller type |
|
l2-vxlan |
l2-vxlan |
|
identifier |
Controller identifier |
|
controller-id |
Controller id value |
copp clear policy pps
Syntax Description
|
copp |
copp |
|
clear |
clear |
|
policy |
policy |
|
pps |
pps |
copp copy profile <profile_type> { prefix | suffix } <user_string>
Syntax Description
|
copp |
Control-Plane Policing |
|
copy |
Make a copy of the CoPP Profile |
|
profile |
CoPP Profile |
|
profile_type |
CoPP Profile Types |
|
prefix |
prefix for the copied policy |
|
suffix |
suffix for the copied policy |
|
user_string |
Enter prefix/suffix for the copied policy |
[no] copp distributed-policing enable
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
copp |
Control-Plane Policing |
|
distributed-policing |
distributed policer |
|
enable |
enable distributed policing |
[no] copp profile [ <profile_type> ]
Syntax Description
|
no |
Negate a command or set its defaults |
|
copp |
Control-Plane Policing |
|
profile |
CoPP Profile |
|
profile_type |
(Optional) CoPP Profile Types |
copp profile <profile_type>
Syntax Description
|
copp |
Control-Plane Policing |
|
profile |
CoPP Profile |
|
profile_type |
CoPP Profile Types |
[no] copp rate-limit disable
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
copp |
copp |
|
rate-limit |
rate-limit |
|
disable |
Disable rate-limit on CoPP queues |
copy { { <src_local> { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } | { <src_remote> { <dest_local> | running-config [ echo-commands ] [ stop-at-first-failure ] | startup-config } } [ source-interface <intf> | vrf <vrf-known-name> ] | { <src_core> { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } | { running-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } | { startup-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } }
Syntax Description
|
copy |
Copy from one file to another |
|
src_local |
Select source filesystem |
|
src_core |
Select source filesystem |
|
dest_local |
Select destination filesystem |
|
dest_remote |
Select destination filesystem |
|
src_remote |
Select source filesystem |
|
vrf |
(Optional) Display per-VRF information |
|
source-interface |
(Optional) Select source interface |
|
intf |
(Optional) |
|
vrf-known-name |
(Optional) Known VRF name |
|
running-config |
Copy from source to running configuration |
|
running-config-src |
Copy running configuration to destination |
|
startup-config |
Copy from source to startup configuration |
|
startup-config-src |
Copy startup configuration to destination |
|
echo-commands |
(Optional) Echo the commands before applying them (to correlate errors) |
|
stop-at-first-failure |
(Optional) Stop at first error |
Usage Guidelines
 Note |
When a source or destination URI contains a reserved character such as '!' or '#', the reserved character must be entered as its percent-encoded ascii value, as described in RFC 3986. For example, the URI !pa##word@example.com must be entered as %21pa%23%23word@example.com. In this example, the reserved characters '!' (ascii 0x21) and '#' (ascii 0x23) are represented as '%21' and '%23'.
|
copy { { <src_local> { <dest_local> | running-config [ echo-commands ] [ stop-at-first-failure ] | startup-config | scheduled-config } } | { <src_core> <dest_local_core> } | { running-config-src { startup-config [ fabric ] | <dest_local_config> } } | { startup-config-src { running-config [ echo-commands ] [ stop-at-first-failure ] | <dest_local_config> } } }
Syntax Description
|
copy |
Copy from one file to another |
|
src_local |
Select source filesystem |
|
src_core |
Select source filesystem |
|
dest_local |
Select destination filesystem |
|
dest_local_core |
Select destination filesystem |
|
dest_local_config |
Select destination filesystem |
|
running-config |
Copy from source to running configuration |
|
running-config-src |
Copy running configuration to destination |
|
startup-config |
Copy from source to startup configuration |
|
startup-config-src |
Copy startup configuration to destination |
|
scheduled-config |
Schedule configuration at the specified source to be applied at next switch reload |
|
echo-commands |
(Optional) Echo the commands before applying them (to correlate errors) |
|
stop-at-first-failure |
(Optional) Stop at first error |
|
fabric |
(Optional) Copy from source to fabric startup configuration |
Usage Guidelines
Note |
When a source or destination URI contains a reserved character such as '!' or '#', the reserved character must be entered as its percent-encoded ascii value, as described in RFC 3986. For example, the URI !pa##word@example.com must be entered as %21pa%23%23word@example.com. In this example, the reserved characters '!' (ascii 0x21) and '#' (ascii 0x23) are represented as '%21' and '%23'.
|
copy { running-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } | startup-config-src { <dest_remote> [ source-interface <intf> | vrf <vrf-known-name> ] } } vdc-all
Syntax Description
|
copy |
Copy from one file to another |
|
dest_remote |
Select destination filesystem |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-known-name |
(Optional) Known VRF name |
|
source-interface |
(Optional) Select source interface |
|
intf |
(Optional) |
|
running-config-src |
Copy running configuration to destination |
|
startup-config-src |
Copy startup configuration to destination |
|
vdc-all |
Perform copy for all vdcs |
Usage Guidelines
Note |
When a source or destination URI contains a reserved character such as '!' or '#', the reserved character must be entered as its percent-encoded ascii value, as described in RFC 3986. For example, the URI !pa##word@example.com must be entered as %21pa%23%23word@example.com. In this example, the reserved characters '!' (ascii 0x21) and '#' (ascii 0x23) are represented as '%21' and '%23'.
|
copy { running-config-src { startup-config | <dest_local_config> } | startup-config-src { running-config | <dest_local_config> } } vdc-all
Syntax Description
|
copy |
Copy from one file to another |
|
dest_local_config |
Select destination filesystem |
|
running-config-src |
Copy running configuration to destination |
|
startup-config |
Copy from source to startup configuration |
|
running-config |
Copy from source to running configuration |
|
startup-config-src |
Copy startup configuration to destination |
|
vdc-all |
Perform copy for all vdcs |
Usage Guidelines
Note |
When a source or destination URI contains a reserved character such as '!' or '#', the reserved character must be entered as its percent-encoded ascii value, as described in RFC 3986. For example, the URI !pa##word@example.com must be entered as %21pa%23%23word@example.com. In this example, the reserved characters '!' (ascii 0x21) and '#' (ascii 0x23) are represented as '%21' and '%23'.
|
copy <source> <destination> recursive [ vrf <vrf-known-name> ]
Syntax Description
|
copy |
Copy from one file to another |
|
recursive |
Recursively copy files and folders |
|
source |
Select source filesystem |
|
destination |
Select destination filesystem |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-known-name |
(Optional) Known VRF name |
Usage Guidelines
Note |
When a source or destination URI contains a reserved character such as '!' or '#', the reserved character must be entered as its percent-encoded ascii value, as described in RFC 3986. For example, the URI !pa##word@example.com must be entered as %21pa%23%23word@example.com. In this example, the reserved characters '!' (ascii 0x21) and '#' (ascii 0x23) are represented as '%21' and '%23'.
|
copy licenses <uri0>
Syntax Description
|
copy |
Copy from one file to another |
|
licenses |
Backup license files |
|
uri0 |
Specify URL (with .tar extension) for backing up license files |
[no] core-on-no-memory
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
core-on-no-memory |
Generate core dump on memory allocation failure |
[no] core-on-no-memory
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
core-on-no-memory |
Generate core dump on memory allocation failure |
{ cost <cost> } | { no cost [ <cost> ] }
Syntax Description
|
no |
Negate a command or set its defaults |
|
cost |
Cost associated with interface |
|
cost |
Cost value |
count
Syntax Description
|
| |
Pipe command output to filter |
|
count |
Count number of lines |
counter name <counter-name> value <counter-value> op <op-val>
Syntax Description
|
counter |
Specify the name of the counter |
|
name |
Specify the name of the counter |
|
counter-name |
Name of the counter |
|
value |
Specify the value to be applied to the counter |
|
counter-value |
Enter the value |
|
op |
Specify the operator to be applied |
|
op-val |
Enter the value of the operator |
[no] cpu threshold [ rising <risingth> falling <fallingth> interval <seconds> ]
Syntax Description
|
no |
Negate a command or set its defaults |
|
cpu |
CPU resource |
|
threshold |
Threshold settings |
|
rising |
(Optional) Rising threshold setting |
|
risingth |
(Optional) Rising threshold in percentage |
|
falling |
(Optional) Falling threshold setting |
|
fallingth |
(Optional) Falling threshold in percentage |
|
interval |
(Optional) Observation interval setting |
|
seconds |
(Optional) Observation interval in seconds |
cpu threshold rising <risingth> falling <fallingth> interval <seconds>
Syntax Description
|
cpu |
CPU resource |
|
threshold |
Threshold settings |
|
rising |
Rising threshold setting |
|
risingth |
Rising threshold in percentage |
|
falling |
Falling threshold setting |
|
fallingth |
Falling threshold in percentage |
|
interval |
Observation interval setting |
|
seconds |
Observation interval in seconds |
[no] crypto ca authenticate <s0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
authenticate |
Authenticate the certificate authority certificate |
|
s0 |
trustpoint label |
[no] crypto ca crl request <s0> <uri0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
crl |
import certificate revocation list |
|
request |
import certificate revocation list |
|
s0 |
trustpoint label |
|
uri0 |
Specify source file name |
[no] crypto ca enroll <s0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
enroll |
Create certificate request |
|
s0 |
trustpoint label |
[no] crypto ca export <s0> pkcs12 <uri0> <s1>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
export |
export rsa private key and certificates in pkcs#12 |
|
s0 |
trustpoint label |
|
pkcs12 |
destination file url |
|
uri0 |
Specify destination file name |
|
s1 |
passphrase to encrypt the private key |
[no] crypto ca import <s0> certificate
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
import |
import the certificate or key |
|
s0 |
trustpoint label |
|
certificate |
import the certificate |
crypto ca import <s0> pkcs12 <uri0> <s1>
Syntax Description
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
import |
import the certificate or key |
|
s0 |
trustpoint label |
|
pkcs12 |
source file url |
|
uri0 |
source file url |
|
s1 |
passphrase to decrypt the private key |
[no] crypto ca lookup { remote | local | both }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
lookup |
Choose the certstore for authentication |
|
remote |
Use remote certstore |
|
local |
Use local certstore |
|
both |
Use both local and remote certstore |
[no] crypto ca remote ldap { server-group <s0> | [ crl-refresh-time <i0> ] }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
remote |
Use ca from remote certstore |
|
ldap |
Ldap certstore |
|
crl-refresh-time |
(Optional) Configure refresh-time to fetch crl from remote certstore |
|
i0 |
(Optional) Refresh time value in hours. A value of 0 will now run the refresh routine once. |
|
server-group |
Ldap server group |
|
s0 |
Ldap server group name |
[no] crypto ca trustpoint <s0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
ca |
Configure certificate authority related information |
|
trustpoint |
Configure trustpoint certificate authority |
|
s0 |
trustpoint label |
[no] crypto cert ssh-authorize [ <s0> map <s1> [ <s2> ] | default map <s3> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Configure crypto settings |
|
cert |
Configure certificate maping filter settings |
|
ssh-authorize |
Configure mapping filter for ssh |
|
s0 |
(Optional) Issuer name of the certificate |
|
map |
(Optional) Mapping filter to be applied |
|
s1 |
(Optional) Name of the mapping filter which is already configured |
|
s2 |
(Optional) Name of the mapping filter which is already configured |
|
default |
(Optional) Default map for ssh authorization |
|
s3 |
(Optional) Name of the default mapping filter which is already configured |
[no] crypto certificatemap mapname <s0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
certificatemap |
Configure certificatemap filters |
|
mapname |
Create a new filter map |
|
s0 |
Name of the filter map |
[no] crypto key generate rsa [ { [ exportable ] [ modulus <i0> ] | [ label <s0> ] [ [ exportable ] [ modulus1 <i1> ] ] | modulus2 <i2> } ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
key |
Configure key pair related information |
|
generate |
Configure key pair generation related information |
|
rsa |
Configure rsa key pair generation related information |
|
exportable |
(Optional) key-pair is exportable |
|
modulus |
(Optional) key-pair size |
|
i0 |
(Optional) key-pair size |
|
label |
(Optional) key-pair label |
|
s0 |
(Optional) key-pair label |
|
exportable |
(Optional) key-pair is exportable |
|
modulus1 |
(Optional) key-pair size |
|
i1 |
(Optional) key-pair size |
|
modulus2 |
(Optional) key-pair size |
|
i2 |
(Optional) key-pair size |
[no] crypto key param rsa label <s0> modulus <i0> [ exportable ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
key |
Configure key pair related information |
|
param |
Configure key pair related information |
|
rsa |
Configure rsa key pair related information |
|
label |
key-pair label |
|
s0 |
key-pair label |
|
modulus |
key-pair size |
|
i0 |
key-pair size |
|
exportable |
(Optional) key-pair is exportable |
[no] crypto key zeroize rsa <s0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
crypto |
Set crypto settings |
|
key |
Configure key pair related information |
|
zeroize |
Delete key-pair |
|
rsa |
Delete rsa key-pair |
|
s0 |
key-pair label |
{ customer-id <s0> | no customer-id }
Syntax Description
|
no |
Negate a command or set its defaults |
|
customer-id |
customer id |
|
s0 |
Provide customer id (as specified in the service agreement) |
cut { -b <bytes> | -c <chars> | -f <fields> | -d <delim> | -s | --help } +
Syntax Description
|
| |
Pipe command output to filter |
|
cut |
Print selected parts of lines. |
|
-b |
output only these bytes |
|
-c |
output only these characters |
|
-d |
specify other field delimiter (default is TAB). |
|
-f |
output only these fields also print any line that contains no delimiter character, unless the -s option is specified |
|
-s |
do not print lines not containing delimiters |
|
bytes |
{n|n-|n-m|-m} N-th byte, N to end of line, N to M, start of line to N |
|
chars |
{n|n-|n-m|-m} N-th char, N to end of line, N to M, start of line to N |
|
fields |
{n|n-|n-m|-m} N-th field, N to end of line, N to M, start of line to N |
|
delim |
field separator char, TAB is default, use ' ' for space |
|
--help |
print help of underlying unix command |
Feedback