G Commands

generate type7_encrypted_secret

generate type7_encrypted_secret

Syntax Description

generate

generate

type7_encrypted_secret

Type 7 Encrypted Secret
Command Mode
  • /exec

getnext

getnext

Syntax Description

|

Pipe command output to filter

getnext

return next instance instead of specified one, or first instance if none specified (if supported by feature)
Command Mode
  • /output

graceful-restart-helper

[no] graceful-restart-helper

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart-helper

Configure Graceful Restart Helper mode functionality
Command Mode
  • /exec/configure/router-bgp/vrf-cmds

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure Graceful Restart functionality
Command Mode
  • /exec/configure/router-bgp/vrf-cmds

graceful-restart

[no] graceful-restart [ planned-only ]

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

planned-only

(Optional) Enable graceful restart only for a planned restart
Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

graceful-restart

{ { [ no ] [ eigrp ] graceful-restart } | { [ no ] nsf } }

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

graceful-restart

Peer resync without adjancency reset

nsf

Non-stop forwarding
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

graceful-restart

[no] graceful-restart [ planned-only ]

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

planned-only

(Optional) Enable graceful restart only for a planned restart
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS
Command Mode
  • /exec/configure/otv-isis/otv-isis-vrf-common

graceful-restart

graceful-restart [ timers { forwarding-holding <fwdg-holdtime> | max-recovery <recovery-time> | neighbor-liveness <peer-liveness-time> } ] | no graceful-restart [ timers { forwarding-holding | max-recovery | neighbor-liveness } ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Configure LDP Graceful Restart

timers

(Optional) Configure Graceful Restart timers

forwarding-holding

(Optional) Forwarding State Holding time

fwdg-holdtime

(Optional) seconds

max-recovery

(Optional) Max-Recovery time

recovery-time

(Optional) seconds

neighbor-liveness

(Optional) Neighbor-Liveness time

peer-liveness-time

(Optional) seconds
Command Mode
  • /exec/configure/ldp

graceful-restart

[no] graceful-restart

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common

graceful-restart grace-period

[no] graceful-restart grace-period <grace-period>

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

grace-period

Configure maximum interval to restart gracefully

grace-period

Grace period in seconds
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

graceful-restart grace-period

[no] graceful-restart grace-period <grace-period>

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

grace-period

Configure maximum interval to restart gracefully

grace-period

Grace period in seconds
Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

graceful-restart helper-disable

[no] graceful-restart helper-disable

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

helper-disable

Disable helper mode
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

graceful-restart helper-disable

[no] graceful-restart helper-disable

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful-restart

Configure graceful restart

helper-disable

Disable helper mode
Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

graceful-restart restart-time

graceful-restart restart-time <restart-time> | no graceful-restart restart-time [ <restart-time> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Configure Graceful Restart functionality

restart-time

Maximum time for restart advertised to peers

restart-time

Restart time (seconds)
Command Mode
  • /exec/configure/router-bgp/vrf-cmds

graceful-restart stalepath-time

graceful-restart stalepath-time <stalepath-time> | no graceful-restart stalepath-time [ <stalepath-time> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Configure Graceful Restart functionality

stalepath-time

Maximum time to keep a restarting peer's stale routes

stalepath-time

Stalepath time (seconds)
Command Mode
  • /exec/configure/router-bgp/vrf-cmds

graceful-restart t3 manual

graceful-restart t3 manual <sec> | no graceful-restart t3 manual [ <sec> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

t3

Set the T3 (RFC 3847) graceful restart timer

manual

Change manually T3 default value

sec

Specify T3 value (secs)
Command Mode
  • /exec/configure/otv-isis/otv-isis-vrf-common

graceful-restart t3 manual

graceful-restart t3 manual <sec> | no graceful-restart t3 manual [ <sec> ]

Syntax Description

no

Negate a command or set its defaults

graceful-restart

Enable graceful restart for IS-IS

t3

Set the T3 (RFC 3847) graceful restart timer

manual

Change manually T3 default value

sec

Specify T3 value (secs)
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common

graceful consistency-check

[no] graceful consistency-check

Syntax Description

no

(Optional) Negate a command or set its defaults

graceful

Enable graceful features

consistency-check

Enable graceful type-1 consistency check
Command Mode
  • /exec/configure/vpc-domain

grep

{ grep | egrep } [ count | ignore-case | line-number | invert-match | word-exp | line-exp | <ctx> | next <num> | prev <num> ] + <expr>

Syntax Description

|

Pipe command output to filter

grep

Grep - print lines matching a pattern

egrep

Egrep - print lines matching a pattern

count

(Optional) Print a total count of matching lines only

ignore-case

(Optional) Ignore case difference when comparing strings

line-number

(Optional) Print each match preceded by its line number

invert-match

(Optional) Print only lines that contain no matches for <expr>

word-exp

(Optional) Print only lines where the match is a complete word

line-exp

(Optional) Print only lines where the match is a whole line

ctx

(Optional) Print <num> lines of context on each side of every match

next

(Optional) Print <num> lines of context after every matching line

prev

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

expr

Search for the expression
Command Mode
  • /output

grep

{ grep | egrep } [ -c | -i | -n | -v | -w | -x | <ctx> | -A <num> | -B <num> ] + <expr>

Syntax Description

|

Pipe command output to filter

grep

Grep - print lines matching a pattern

egrep

Egrep - print lines matching a pattern

-c

(Optional) Print a total count of matching lines only

-i

(Optional) Ignore case difference when comparing strings

-n

(Optional) Print each match preceded by its line number

-v

(Optional) Print only lines that contain no matches for <expr>

-w

(Optional) Print only lines where the match is a complete word

-x

(Optional) Print only lines where the match is a whole line

ctx

(Optional) Print <num> lines of context on each side of every match

-A

(Optional) Print <num> lines of context after every matching line

-B

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

expr

Search for the expression
Command Mode
  • /output

grep

{ grep | egrep } [ -c | -i | -n | -v | -w | -x | <ctx> | -A <num> | -B <num> ] + [ -- ] <expr>

Syntax Description

|

Pipe command output to filter

grep

Grep

egrep

Egrep

-c

(Optional) Print a total count of matching lines only

-i

(Optional) Ignore case difference when comparing strings

-n

(Optional) Print each match preceded by its line number

-v

(Optional) Print only lines that contain no matches for <expr>

-w

(Optional) Print only lines where the match is a complete word

-x

(Optional) Print only lines where the match is a whole line

ctx

(Optional) Print <num> lines of context on each side of every match

-A

(Optional) Print <num> lines of context after every matching line

-B

(Optional) Print <num> lines of context before every matching line

num

(Optional) Print <num> lines of context

--

(Optional) --

expr

Search for the expression
Command Mode
  • /output

guestshell

guestshell [ { enable [ { package <enable_uri> } ] } | { upgrade [ { package <upgrade_uri> } ] } | { disable } | { destroy } | { reboot } | { sync } | { resize { rootfs <gsh_rootfs> | cpu <gsh_cpu> | memory <gsh_memory> } } | { run { <cmd_args> } } ]

Syntax Description

guestshell

Request a guest shell

enable

(Optional) Enable the guest shell service

upgrade

(Optional) Upgrade the guest shell service package to a different version

disable

(Optional) Disable the guest shell service package

destroy

(Optional) Disable and uninstall the guest shell service package

sync

(Optional) Synchronize the contents of the guest shell to standby supervisor

reboot

(Optional) Deactivate and reactivate the guest shell service

resize

(Optional) Resize the existing/default guest shell parameters

rootfs

(Optional) Resize the guest shell root filesystem to a larger value

gsh_rootfs

(Optional) New root filesystem size (in MB)

cpu

(Optional) Resize the system CPU share allocated to guest shell

gsh_cpu

(Optional) New CPU share allocation (as % of system CPU)

memory

(Optional) Resize the system memory allocated to guest shell

gsh_memory

(Optional) New memory size (in MB)

package

(Optional) Package location

enable_uri

(Optional) File name (with .ova extension) for the virtual service

upgrade_uri

(Optional) File name (with .ova extension) for the virtual service

run

(Optional) Execute/run program in the guest shell

cmd_args

(Optional) Executable with optional arguments
Command Mode
  • /exec

gunzip

gunzip <uri0>

Syntax Description

gunzip

Uncompresses LZ77 coded files

uri0

Enter filename (filename must have .gz extension)
Command Mode
  • /exec

gzip

gzip <uri0>

Syntax Description

gzip

Compresses file using LZ77 coding

uri0

Enter filename
Command Mode
  • /exec