Repacking the Switch

If you need to return or move the switch chassis, follow these steps to repack the switch using the original packaging material.

Procedure

Step 1

Set the chassis in the bottom pallet.

Figure 1. Packing Material
Step 2

Place the packing bag over the chassis.

Step 3

Place the front-packing material and power supply packing material around the chassis.

Step 4

Place the power supplies in the spaces provided in the power supply packing material.

Step 5

Place the top-packing material over the top of the chassis and power supplies.

Step 6

Place the rack-mount kit and the accessory kit on the top-packing material.

Note 
You must include the accessory kit for the final packaging to fit properly.
Step 7

Place the outside carton over the entire package.

Step 8

Fold the outside carton down over the top and seal with packing tape.

Step 9

Wrap three packing straps tightly around the top and bottom of the package to hold the outside carton and the bottom pallet together.

Figure 2. Final Package