Configure Cisco VVB on Unified CVP
Procedure
Step 1 |
Log in to CVP Operations Console and click . |
||||||||||||||||||||||||||||||||||||||||||||||||
Step 2 |
Click Add New.
|
||||||||||||||||||||||||||||||||||||||||||||||||
Step 3 |
In the General tab, enter the field values, and click Save. To configure General settings on a VVB, on the General tab, enter the field values, as listed in the following table:
|
||||||||||||||||||||||||||||||||||||||||||||||||
Step 4 |
(Optional) On the Device Pool tab, select the field values and move to Selected. |
||||||||||||||||||||||||||||||||||||||||||||||||
Step 5 |
Click Save. |