|
Group
|
If there are IP address pools configured as part of a defined pool group, this field displays the name of the pool group.
|
|
Ungrouped Public Pools
|
Displays information for IP address pools not part of defined pool groups.
|
|
Pool
|
Identifies the name
of the IP Pool.
|
|
Start Address/End
Address or mask
|
Identifies the starting
IP address and the ending IP address (or the subnet mask) of
the pool.
|
|
Pool Status
|
Identifies the status
if the IP address pool.
Good: Indicates
that the pool is ready to provide addresses.
Pending Delete: Indicates
that the pool is in the process of being deleted.
Resizing: Indicates
that the pool is in the process of being resized.
Inactive: Indicates
that the pool is not being used.
|
|
Type
|
Identifies the type
of IP address pool.
Public: Indicates
that the pool is comprised of public IP addresses.
Private: Indicates
that the pool is comprised of private IP addresses.
Static: Indicates
that the pool is comprised of statically assigned IP addresses.
Resource: Indicates
that the pool is comprised of resource IP addresses.
NAT: Indicates
that the pool is comprised of NAT IP addresses.
|
|
Priority
|
Identifies the priority
of the IP pool (0 = highest, 10 = lowest)
|
|
Group
|
Identifies the group
to which the IP pool belongs.
|
|
VRF
|
Identifies the VRF
name.
|
|
Used
|
Specifies the number
of IP addresses currently in use in this pool.
|
|
Free
|
Specifies the number
of IP addresses currently available for use in this pool.
|
|
Hold
|
Specifies the number
of IP addresses currently unavailable and on hold for the subscribers
that just disconnected in case a reconnect occurs within the range
of the address-hold-timer value
configured in the ip
pool command.
|
|
Released
|
Specifies the number
of IP addresses in this pool that are in the process of being released (from
general use or the hold state).
|
|
Addr-Hold-Timer
|
Identifies the address-hold-timer value configured
in the ip pool command.
|
|
Limit Exceeded
|
Specifies the number
of times the hold timer limit was exceeded and the IP address being
held was returned to an available or free state.
|
|
Addr-Quarantine-Timer
|
dentifies the address-quarantine-timer value configured in the ip pool command.
|
|
Quarantine
|
Specifies the number of times the quarantine timer limit was exceeded and the IP address being quarantined was returned to
an available or free state.
|
|
Total Alloc Req
|
Specifies the total
number of IP address requests made to this pool.
|
|
Total Rel Req
|
Specifies the total
number of IP address release requests made to this pool.
|
|
Input Label
|
Identifies the input
label for the VRF.
|
|
Output Label
|
Identifies the output
label for the VRF.
|
|
Network Reachability Detection
Server
|
Identifies the name
of a configured network reachability server that is bound to the
IP pool.
|
|
Unicast Gratuitous-ARP Address
|
Identifies if the
ability to perform a unicast gratuitous ARP to the specified IP address
rather than broadcast gratuitous ARP when gratuitous ARP generation
is required is enabled for this pool.
|
|
Nexthop Forwarding Address
|
Identifies the IP
address of the next hop gateway where a subscriber that is assigned
an IP address from this pool is forwarded.
|
|
Vlan ID
|
Identifies the VLAN
ID that enables over-lapping IP address pool support and associates
the pool with the specified virtual LAN (VLAN).
|
|
Suppress-Switchover-ARPS
|
Identifies if the
ability to suppress corresponding gratuitous ARP generation when
a line card switchover occurs is enabled or disabled for this pool.
|
|
Send-ICMP-Dest-Unreachable
|
Specifies whether
or notvan ICMP destination unreachablevPDU is generated when the
system receives a PDU destined for an unused address within the pool.
|
|
Explicit-Route-Advertise
|
If a pool is configured
with this option, then none of the fragment addresses for this
pool are added to the kernel. However, the fragment
addresses are added to the NPU. As the calls come up and
addresses from this pool (with the new option) are used, these
addresses are added to the kernel.
|
|
Advertise-if-used
|
Indicates if the option
is enabled to use advertise address or not.
|
|
Include-Network-Broadcast-Address
|
Indicates whether
IP pool is configured to include network broadcast address or not.
|
|
Allow-Static-Allocation
|
Indicates whether
IP pool configured to allow static allocation of IP address or not.
|
|
Group Available Threshold
|
Specifies the low
threshold IP pool utilization percentage that must be met or passed
within the polling interval to generate an alert or alarm.
Clear: Specifies
the high threshold IP pool utilization percentage that maintains
a previously generated alarm condition. If the utilization
percentage rises above the high threshold within the polling interval, a
clear alarm will be generated.
|
|
Pool-Free
Threshold
|
Specifies the low
threshold IP pool utilization percentage that must be met or exceeded
within the polling interval to generate an alert or alarm.
Clear: Specifies
the high threshold IP pool utilization percentage that maintains
a previously generated alarm condition. If the utilization
percentage rises above the high threshold within the polling interval, a
clear alarm will be generated.
|
|
Pool-Used
Threshold
|
Specifies the high
threshold IP pool utilization percentage that must be met or exceeded
within the polling interval to generate an alert or alarm.
Clear: Specifies
the low threshold IP pool utilization percentage that maintains a
previously generated alarm condition. If the utilization
percentage falls beneath the low threshold within the polling interval, a
clear alarm will be generated.
|
|
Pool-Release
Threshold
|
Specifies the high
threshold IP pool utilization percentage that must be met or exceeded
within the polling interval to generate an alert or alarm.
Clear: Specifies
the low threshold IP pool utilization percentage that maintains a
previously generated alarm condition. If the utilization
percentage falls beneath the low threshold within the polling interval, a
clear alarm will be generated.
|
|
Pool-Hold Threshold
|
Specifies the high threshold IP pool utilization percentage that must be met or exceeded within the polling interval to generate
an alert or alarm.
Clear: Specifies the low threshold IP pool utilization percentage that maintains a previously generated alarm condition. If
the utilization percentage falls beneath the low threshold within the polling interval, a clear alarm will be generated.
|
|
Pool-Qurantine Threshold
|
Specifies the high threshold IP pool utilization percentage that must be met or exceeded within the polling interval to generate
an alert or alarm.
Clear: Specifies the low threshold IP pool utilization percentage that maintains a previously generated alarm condition. If
the utilization percentage falls beneath the low threshold within the polling interval, a clear alarm will be generated.
|
|
cip-local-pool-used Threshold
|
Specifies the high threshold IP pool utilization percentage that must be met or exceeded within the polling interval to generate
an alert or alarm.
Clear: Specifies the low threshold IP pool utilization percentage that maintains a previously generated alarm condition. If
the utilization percentage falls beneath the low threshold within the polling interval, a clear alarm will be generated.
|
|
cip-local-pool-in-use-addr Threshold
|
Specifies the high threshold IP pool utilization percentage that must be met or exceeded within the polling interval to generate
an alert or alarm.
Clear: Specifies the low threshold IP pool utilization percentage that maintains a previously generated alarm condition. If
the utilization percentage falls beneath the low threshold within the polling interval, a clear alarm will be generated.
|
|
Group Summary
|
This field and the related data are only displayed for pools that are part of a IP pool group.
|
|
Group Used
|
Specifies the number of IP addresses within the group that are currently in use.
|
|
Group Free
|
Specifies the number of IP addresses within the group that are currently available.
|
|
Group Hold
|
Specifies the number of IP addresses in the group that are unavailable and on hold for the subscribers that just disconnected
in case a reconnect occurs within the range of the address-hold-timer value configured in the ip pool command.
|
|
Group Released
|
Specifies the number of IP addresses in the group that are in the process of being released (from general use or the hold
state).
|
|
Group Effective Alarm Threshold %
|
Identifies the alarm threshold for the group. This parameter is based on the configured threshold of the first IP pool used
in the group.
|
|
Group Effective Clear Threshold %
|
Identifies the clear threshold for the group. This parameter is based on the configured threshold of the first IP pool used
in the group.
|
|
Group Current Usage %
|
Identifies the percentage of IP addresses currently in use within the group.
|
|
Group Status
|
Identifies the status of the group.
(G) - Good: Indicates that the pool is ready to provide addresses.
(D) - Pending Delete: Indicates that the pool is in the process of being deleted.
(R) - Resizing: Indicates that the pool is in the process of being resized.
(I) - Inactive: Indicates that the pool is not being used.
|
|
Total Pool Count
|
Specifies the total number of IP address pools in the summary.
|
|
Total Pool Kernel Routes
|
Specifies the total number of Kernal routes that exist across all pools in the summary.
|
|
Max Pool Kernel Routes
|
Specifies the maximum number of IP pool routes supported by the system.
|
|
Total Pool Explicit Host Routes
|
Specifies the total number of pool explicit routes that exist across all pools in the summary.
|
|
Max Pool Explicit Host Routes
|
Specifies the maximum number of pool explicit host routes supported by the system.
|
Feedback