handovers

Indicates the action the MME is configured to take for handovers when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

combined-attaches

Indicates the action the MME is configured to take for combined Attach requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

ps-attaches

Indicates the action the MME is configured to take for packet switched Attach requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

addn-pdn-connects

Indicates the action the MME is configured to take for additional PDN context connections when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

addn-brr-requests

Indicates the action the MME is configured to take for additional bearer requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

brr-ctxt-mod-requests

Indicates the action the MME is configured to take for Bearer Resource Context Modification Requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

service-request

Indicates the action the MME is configured to take for service requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

tau-request

Indicates the action the MME is configured to take for TAU requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

s1-setups

Indicates the action the MME is configured to take for S1 setup attempts when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

init-ues

Indicates the action the HeNBGW is configured to take for Initial UE messages received when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

paging

Indicates the action the HeNBGW is configured to take for Paging requests when a congestion control threshold is reached. Possible actions are none (ignore), reject, drop.

exclude-emergency-events

Indicates whether the MME is configured to exclude emergency calls when a congestion control threshold is reached. This setting is disabled when 'no exclude-emergency-events' is displayed.

exclude-voice-events

Indicates whether the MME is configured to exclude voice calls when a congestion control threshold is reached. This setting is disabled when 'no exclude-voice-events' is displayed.

report-overload

Indicates whether the MME is configured to report overload conditions to eNodeBs to alleviate congestion scenarios.

Cause Code Group name

S1AP Protocol

class

Lists the configuration of each cause code entry, organized by class (miscellaneous, nas, protocol, radio, trasnport), for this Cause Code Group.

Foreign PLMN GUTI Management DB name

PLMN

Lists the management database PLMN entries and the configuration of each entry.

forbidden tracking areas

Lists the PLMN IDs which are part of the handover restriction list.

forbidden location areas

Lists the PLMN IDs which are part of the handover restriction list.

ue-validation-level

Indicates the type of UE that can use the emergency bearer service through this profile.

apn

Indicates the name and PDN type of the access point name (APN) used for emergency PDN connections.

If enabled, the configured restoration priority of 1 through 16 is displayed (1 is highest priority, 16 is lowest).

qos

Indicates the quality of service (QoS) settings for this emergency bearer service.

ambr

Indicates the maximum aggregated uplink and downlink bitrate values for this profile.

FQDN PGW

Indicates the Fully Qualified Domain Name of the P-GW to be used for emergency bearer services through this profile.

STATIC PGW

Indicates the static IP address, protocol, and weight of the P-GW to be used for emergency bearer services through this profile.

LCS QOS

Indicates the configuration of the lcs-qos command for this LTE emergency profile. This displays the location service QoS settings to be used for this emergency profile.

Horizontal Accuracy: The horizontal positioning accuracy value.

Vertical Accuracy: The vertical positioning accuracy value.

attach-only

Specifies the SGW preference for SGW-relocation.

Paging Map n

Precedence

Indicates the order in which the MME checks the entries for this paging-map.

Traffic Type

Indicates the traffic type such as CS, PS, SIGNALING and sub-type that is specified for this paging-map.

Paging profile

Indicates the paging-profile to be used for this traffic type.

Precedence

Displays the configured precedence value.

Packet-Switched(PS)

Displays the paging is for Packet-Switched traffic.

APN

Displays the configured APN profile name.

ARP

Displays the configured ARP value.

Paging is performed as per paging-profile <name>

Displays the paging profile name.

Paging Profile n

Paging Stage n: Lists all Paging Stages configured for this Paging Profile.

Paging Action

Match Criteria

T3413-Timeout

Indicates the time interval in seconds between paging requests.

Max Paging Retries

Indicates the number of paging requests to be sent out during this paging stage.

TAI Management DB n

Time Zone

Indicates the time zone settings to be used for the UE timezone in S11 and NAS messages.

Short Network Name

Indicates the short network name to be used in the Short network name IE in the EMM Information message sent by the MME.

Long Network Name

Indicates the full (long) network name to be used in the Long network name IE in the EMM Information message sent by the MME.

TAI Management Object

Access-Type NB-IoT

Displays the configured access type. The show output displays whether all the TACs configured belong to either WB-EUTRAN or NB-IoT RAT. It is also possible that some of the configured TACs belong to WB-EUTRAN and the rest belong to NB-IoT RAT.