Service name

The name of the PDG service.

Context name

The name of the context in which the PDG service resides.

Bind

Displays the bind status for the PDG service for binding the service to a crypto template.

Max sessions

The maximum number of sessions supported by the PDG service.

IP address

The IPv4 address of the PDG service.

UDP Port

The UDP port number associated with the IP address.

Service State

The current state of the PDG service.

Crypto-template

The name of the crypto template bound to the FNG service.

SSL-template

The name of the SSL template bound to the FNG service.

This is a customer-specific field.

SGTP Service

The name of the SGTP service bound to the PDG service.

SGTP Service context

Session Setup Timeout (sec)

The maximum time allowed to set up a session in seconds.

Certificate Selection

PLMN Id

Duplicate Session Detection Type

The duplicate session detection type.

IP Source Violation - Drop Limit

The drop-limit value, which is the maximum number of allowed IP source violations within the detection period before dropping a call.

IP Source Violation - Period

The detection period in seconds for IP source violations.

IP Source Violation - Clear On Valid Packet

Displays whether the option to reset the drop-limit counters upon receipt of a properly addressed packet is enabled or disabled.

3gpp qos to dscp Downlink mapping

conversational

Indicates the DSCP configured for conversational type of traffic.

streaming

Indicates the DSCP configured for streaming type of traffic.

interactive (TP 1)

interactive (TP 2)

interactive (TP 3)

background

Indicates the DSCP configured for background type of traffic.

based on Alloc. Prio

interactive (TP 1, Alloc.P 1)

interactive (TP 1, Alloc.P 2)

interactive (TP 1, Alloc.P 3)

interactive (TP 2, Alloc.P 1)

interactive (TP 2, Alloc.P 2)

interactive (TP 2, Alloc.P 3)

interactive (TP 3, Alloc.P 1)

interactive (TP 3, Alloc.P 2)

Indicates the DSCP configured for interactive type of traffic with traffic priority 2 and allocation priority 2.

interactive (TP 2, Alloc.P 3)

Indicates the DSCP configured for interactive type of traffic with traffic priority 3 and allocation priority 2.

conversational

Indicates the DSCP configured for conversational type of traffic.

streaming

Indicates the DSCP configured for streaming type of traffic.

interactive (TP 1)

interactive (TP 2)

Indicates the DSCP configured for interactive type of traffic with traffic priority 2.

interactive (TP 3)

background

Indicates the DSCP configured for background type of traffic.

3GPP qos to dscp Uplink mapping based on Alloc. Prio

interactive (TP 1, Alloc.P 1)

interactive (TP 1, Alloc.P 2)

interactive (TP 1, Alloc.P 3)

interactive (TP 2, Alloc.P 1)

interactive (TP 2, Alloc.P 2)

interactive (TP 2, Alloc.P 3)

interactive (TP 3, Alloc.P 1)

interactive (TP 3, Alloc.P 2)

interactive (TP 3, Alloc.P 3)

Indicates the DSCP configured for interactive type of traffic with traffic priority 3 and allocation priority 3.

Session Stats

Current sessions total

Total number of sessions in progress including transient sessions.

Direct-IP-IPv4 current

Total number of currently active Direct IP IPv4 sessions.

TTG-IPv4 current

Total number of currently active TTG IPv4 sessions.

Active current

Total number of currently active sessions.

Dormant current

Total number of currently dormant sessions.

Active IPv4 current

Total number of currently active IPv4 sessions.

Active IPv6 current

Total number of currently active IPv6 sessions.

Dormant IPv4 current

Total number of currently dormant IPv4 sessions.

Dormant IPv6 current

Total number of currently dormant IPv6 sessions.

Total Direct-IP IPv4

Total number of Direct IP IPv4 sessions.

Total TTG IPv4

Total number of TTG IPv4 sessions.

Direct-IP IPv4 attempts

Total number of Direct IP IPv4 attempts.

Direct-IP IPv4 successes

Total number of Direct IP IPv4 successes.

Direct-IP IPv4 failures

Total number of Direct IP IPv4 failures.

TTG IPv4 attempts

Total number of TTG IPv4 attempts.

TTG IPv4 successes

Total number of TTG IPv4 successes.

TTG IPv4 failures

Total number of TTG IPv4 failures.

Total setup attempts

Total number of session setup attempts.

Total setup success

Total number of successful session attempts.

Total Attempts Failed

Total number of failed session attempts.

Total disconnected

Total number of sessions released locally and remotely.

Disconnect locally

Total number of sessions released locally.

Disconnect remotely

Total number of sessions released remotely.

Disconnect remotely before connect

Total number of sessions released remotely before connecting.

Reauthentication Stats

Total reauth attempts

Total number of reauthentication attempts.

Total reauth success

Total number of reauthentication successes.

Total reauth failure

Total number of reauthentication failures.

Session Attempts Failed Disconnect reason

Remote disconnect

Number of session attempts failed before the call is in the CONNECTED state due to a remote disconnect.

Admin disconnect

Number of session attempts failed before the call is in the CONNECTED state due to a disconnect by the administrator.

Session setup timeout

Number of session attempts failed before the call is in the CONNECTED state because the Session Manager's session setup timer has timed out.

No resource

Number of session attempts failed before the call is in the CONNECTED state because the system has run out of resources (flows, memory resources, etc.).

Auth failure

Number of session attempts failed before the call is in the CONNECTED state because of an AAA authentication failure.

Flow add failure

Number of session attempts failed before the call is in the CONNECTED state because a flow could not be added on the NPU.

Invalid dest-context

Number of session attempts failed before the call is in the CONNECTED state because the destination context received from the AAA server is invalid.

GTP

Number of session attempts failed before the call is in the CONNECTED state because of a GTP failure.

Duplicate request

Number of session attempts failed before the call is in the CONNECTED state because of duplicate requests.

Addr assign failure

Number of session attempts failed before the call is in the CONNECTED state because no remote IP address has been assigned.

Miscellaneous reasons

Number of session attempts failed because of miscellaneous reasons, including all session setup failures due to SSL failures (for example, handshake failures, ssl-alert, ssl-bad-message), or an unknown APN case in which the TTG is unable to resolve the APN, and all remaining disconnect reasons before the call is in the CONNECTED state.

Session Disconnect reason

Remote disconnect

Number of sessions disconnected after the call is in the CONNECTED state because of a remote disconnect.

Admin disconnect

Number of sessions disconnected after the call is in the CONNECTED state by the administrator.

Idle timeout

Number of sessions disconnected after the call is in the CONNECTED state because the Idle timer has timed out.

Absolute timeout

Number of sessions disconnected after the call is in the CONNECTED state because the Absolute timer has timed out.

Long duration timeout

Number of sessions disconnected after the call is in the CONNECTED state because the Long Duration timer has timed out.

Re-Auth failure

Number of sessions disconnected after the call is in the CONNECTED state because of a re-authentication failure.

Source address violation

Number of sessions disconnected after the call is in the CONNECTED state because the source IP address is invalid.

GTP

Number of GTP sessions disconnected after the call is in the CONNECTED state.

Duplicate request

Number of sessions disconnected after the call is in the CONNECTED state because of duplicate requests.

Miscellaneous reasons

Number sessions disconnected after the call is in the CONNECTED state because of miscellaneous reasons.

Data Stats

Total Bytes Sent

Total number of bytes sent.

Total Packets Sent

Total number of packets sent.

Total Bytes Rcvd

Total number of bytes received.

Total Packets Rcvd

Total number of packets received.

Total Packets Violations

Total number of packet violations.

EAP Server Statistics

Total Received

Total number of EAP messages received from the EAP server in pass-through mode.

Success Received

Total Number of EAP success messages received from the EAP server in pass-through mode.

Challenge Received

Total number of EAP challenge messages received from the EAP server in pass-through mode.

Failures Received

Total number of EAP failure messages received from the EAP server in pass-through mode.

Total Sent

Total number of EAP messages transmitted to the EAP server in pass-through mode.

Initial Requests

Total number of initial EAP messages transmitted to the EAP server in pass-through mode.

Requests Forwarded

Total number of EAP requests forwarded to the EAP server in pass-through mode.

EAP Mobile Stats

Total Received

Discarded