end
Exits the current configuration mode and returns to the Exec mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
end
Usage Guidelines
Use this command to return to the Exec mode.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The LTE Forbidden Location Area Configuration Mode is used to create and manage forbidden 3G location area code (LAC) configurations.
Exec > Global Configuration > LTE Policy Configuration > LTE HO Restriction List Configuration > LTE Forbidden Location Area Configuration
configure > lte-policy > ho-restrict-list list_name > forbidden location-area plmnid plmn_id
Entering the above command sequence results in the following prompt:
[local]host_name(forbidden_la)#
Important |
The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s). |
Exits the current configuration mode and returns to the Exec mode.
All
Security Administrator, Administrator
end
Use this command to return to the Exec mode.
Exits the current mode and returns to the parent configuration mode.
All
Security Administrator, Administrator
exit
Use this command to return to the parent configuration mode.
Configures a 3G location area code (LAC) or area codes where a UE, associated with this LTE policy, is restricted from participating in a handover scenario.
MME
Administrator
Exec > Global Configuration > LTE Policy Configuration > LTE HO Restriction List Configuration > LTE Forbidden Location Area Configuration
configure > lte-policy > ho-restrict-list list_name > forbidden location-area plmnid plmn_id
Entering the above command sequence results in the following prompt:
[local]host_name(forbidden_la)#
[ no ] lac area_code +
Removes a configured forbidden handover area code or area codes from this policy. If no location area code is specified, then all location area codes are removed.
Specifies an area code or area codes from which UEs are restricted from participating in a handover as an integer from 0 to 65535. Multiple area codes can be entered (up to 128 in a single line, separated by spaces).
Indicates that multiple area codes up to 128 in a single line, separated by spaces, can be entered in this command.
Use this command to configure 3G location-based area codes that will be forbidden to UEs associated with this LTE policy.
lac 1 2 3 4 5 6 7 8