Command Line Interface Reference, Modes I - Q, StarOS Release 21.15

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 29, 2019

PVC Configuration Mode Commands

Mode

The Permanent Virtual Connection (PVC) configuration mode commands bind IP interfaces or SS7-Frame Relay links a PVC as well as configure PVC operational parameters for a specific port.

Exec > Global Configuration > ATM Port Configuration > PVC Configuration

configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number

Entering the above command sequence results in the following prompt:

[local]host_name(config-port-slot_number/port_number-pvc-pvc_number/vci_number)#

Important

The commands or keywords/variables that are available are dependent on platform type, version, and installed license(s).

bind

This command binds an IP interface or an SS7 link to the PVC.

Important

Prior to attempting the binding, the interface and context or the SS7 routing information and link must have been configured.

Product

SGSN

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > ATM Port Configuration > PVC Configuration

configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number

Entering the above command sequence results in the following prompt:

[local]host_name(config-port-slot_number/port_number-pvc-pvc_number/vci_number)#

Syntax

[ no ] bind { interface  interface_name context_name | link ss7-routing-domain  rd_id linkset-id  id link-id  id }

no

Removes the binding from the configuration.

`interface_name`

Defines the name of the virtual interface to be bound to the PVC. interface_name: Must be a unique string consisting of 1 to 79 alphanumeric characters.

`context_name`

Specifies the name of the context to be bound to the virtual interface. context_name: Must be a unique string consisting of 1 to 79 alphanumeric characters.

ss7-routing-domain `rd_id`

Identifies a specific SS7 routing domain. rd_id must be an integer from 1 to 12

linkset-id `id`

Identifies a specific linkset within the routing domain. id : must be an integer from 1 to 33

link-id `id`

Identifies a specific link within the linkset. id : must be an integer value 1 - 16

Usage Guidelines

Use this command to bind the PVC to an interface or a specific link.

Examples

Use a command similar to the following to bind a PVC to a link ID #2:

bind ss7-routing-domain  1 linkset-id  23 link-id  2

do show

Executes all show commands while in Configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

do show

Usage Guidelines

Use this command to run all Exec mode show commands while in Configuration mode. It is not necessary to exit the Config mode to run a show command.

The pipe character | is only available if the command is valid in the Exec mode.

Caution

There are some Exec mode show commands which are too resource intensive to run from Config mode. These include: do show support collection , do show support details , do show support record and do show support summary . If there is a restriction on a specific show command, the following error message is displayed:

Failure: Cannot execute 'do	show support' command from Config mode.

encapsulation aal5

Specify the data encapsulation type for the ATM adaptation layer 5 (AAL5) frames for the PVC.

Product

SGSN

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > ATM Port Configuration > PVC Configuration

configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number

Entering the above command sequence results in the following prompt:

[local]host_name(config-port-slot_number/port_number-pvc-pvc_number/vci_number)#

Syntax

encapsulation aal5 { llc-snap | vc-mux }

llc-snap

Frames protocol is identified in the AAL5 using logical link control (LLC) encapsulation.

vc-mux

Frames are not encapsulated and use virtual circuit multiplexing (VC-MUX) to identify the protocols used for the AAL5 frames.

Usage Guidelines

Use this command to identify the protocol type for the circuit.

Examples

encapsulation aal5 vc-mux

end

Exits the PVC configuration mode and returns to the Exec mode.

Product

SGSN

Privilege

Security Administrator, Administrator

Syntax

end

Usage Guidelines

Change the mode back to the Exec mode.

exit

Exits the PVC configuration mode and returns to the ATM port configuration mode.

Product

SGSN

Privilege

Security Administrator, Administrator

Syntax

exit

Usage Guidelines

Return to the port configuration mode.

shaping

Specify the type of traffic shaping (rates) for this PVC.

Product

SGSN

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > ATM Port Configuration > PVC Configuration

configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number

Entering the above command sequence results in the following prompt:

[local]host_name(config-port-slot_number/port_number-pvc-pvc_number/vci_number)#

Syntax

shaping { cbr pcr  prc_num | ubr pcr  prc_num | ubr+ pcr  prc_num mrc  mrc_num | vbr pcr  prc_num scr  src_num mbs  mbs_num }

cbr

Constant bit rate

pcr - peak cell rate = cells per second

prc_num: Must be an integer from 75 to 1412830

ubr

Unspecified Bit Rate

pcr - peak cell rate = cells per second

prc_num: Must be an integer from 75 to 1412830

ubr+

Unspecified Bit Rate with Minimum Cell Rate.

The PCR and MCR values should be set to maintain the following relationship: PCR >= (MCR + minRate), where the current recomment minRate is 75.

pcr - peak cell rate = cells per second

prc_num: Must be an integer from 75 to 1412830

mcr - minimum cell rate

mrc_num: Must be an integer from 75 to 1412830

vbr

Variable Bit Rate, NRT (not real time) type.

The PCR and MCR values should be set to maintain the following relationship: PCR >= (MCR + minRate), where the current recomment minRate is 75.

pcr - peak cell rate = cells per second

prc_num must be an integer from 75 to 1412830

scr - sustained cell rate

src_num must be an integer from 75 to 1412830

mbs - maximum burst size

mbs_num must be an integer from 75 to 1412830

Usage Guidelines

Use this command to configure the shaping for egress traffic on this PVC.

Examples

shaping cbr pcr  56000

shutdown

Disables/enables traffic over the current VLAN.

Product

SGSN

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > ATM Port Configuration > PVC Configuration

configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number

Entering the above command sequence results in the following prompt:

[local]host_name(config-port-slot_number/port_number-pvc-pvc_number/vci_number)#

Syntax

shutdown  
no shutdown

no

Enables the VLAN. When omitted the VLAN is non-functional.

Usage Guidelines

Enables/ Disables specified VLAN.

This command is necessary to bring a VLAN into service by enabling it via the no keyword.

Examples

To disable a VLAN from sending or receiving network traffic use the following command:

shutdown

To enable a VLAN use the following command:

no shutdown

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)