delay-tolerance
Defines the maximum number of seconds a control plane signaling message can be queued before being processed. After exceeding this delay, the message is dropped.
Product
GGSN
P-GW
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > RLF Template Configuration
configure > rlf-template rlf_template_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-rlf-template)#
Syntax
delay-tolerance tolerance_value [ -noconfirm ]
default delay-tolerance
default
Removes the configuration associated with the RLF template. Default value is 2.
tolerance_value
Specifies the maximum number of seconds a message can be queued in the RLF module. The message must be sent after expiry of "delay-tolerance" seconds.
tolerance_value must be an integer from 0 through 10. Default value is 2.
[ -noconfirm ]
Specifies that the command must execute without any prompts and confirmation from the user.
Usage Guidelines
Use this command to define the maximum number of seconds a message can be queued in the RLF module before being processed. After exceeding this delay, the message is dropped.
Example
delay-tolerance 4