Command Line Interface Reference, Modes R - Z, StarOS Release 21.19

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 1, 2020

Chapter: TSI Server Configuration Mode Commands

TSI Server Configuration Mode Commands
do show
end
exit
ip
logging
sftp
update-time

TSI Server Configuration Mode Commands

Mode

Exec > Global Configuration > Security Configuration > TSI Server Configuration

configure > security > server talos-intelligence server-name

Entering the above command sequence results in the following prompt:

[local]host_name(config-server-tsi)#

Important

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

do show

Executes all show commands while in Configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

do show

Usage Guidelines

Use this command to run all Exec mode show commands while in Configuration mode. It is not necessary to exit the Config mode to run a show command.

The pipe character | is only available if the command is valid in the Exec mode.

Caution

There are some Exec mode show commands which are too resource intensive to run from Config mode. These include: do show support collection , do show support details , do show support record and do show support summary . If there is a restriction on a specific show command, the following error message is displayed:

Failure: Cannot execute 'do	show support' command from Config mode.

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

ip

Configures the IP address and port number used to communicate with the Talos Security Intelligence (TSI) database server (Mediator).

Product

All

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Security Configuration > TSI Server Configuration

configure > security > server talos-intelligence server-name

Entering the above command sequence results in the following prompt:

[local]host_name(config-server-tsi)#

Syntax

ip address ip_address port port_number 
no ip

no ip

Removes the configured TSI server.

address `ip_address`

Specifies the IP address of the TSI database server (Mediator) from which security updates are received.

ip_address must be specified in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.

port `port_number`

Specifies the port number used to communicate with the TSI server (Mediator).

port_number must specified as 5341 for successful communication with the TSI database server..

Usage Guidelines

Use this command to configure the IP address and port number for the system to connect to the TSI database server.

Example

The following command configures the system to connect to a TSI server with the IP address of 10.1.10.10 on port number 5341:

ip address 10.1.10.10 port 5341

logging

Configures the logging level for connection events to the TSI database server events and transactions.

Product

All

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Security Configuration > TSI Server Configuration

configure > security > server talos-intelligence server-name

Entering the above command sequence results in the following prompt:

[local]host_name(config-server-tsi)#

Syntax

logging level { error | warning | unusual | info | debug } 
no logging

no logging

Removes the configured event logging level and returns the system to the default logging level of error .

level { error | warning | unusual | info | debug }

Specifies the level of information to be logged for TSI database server connectivity events. The following severities are supported:

error – log error events and all events with a higher severity level
warning – log warning events and all events with a higher severity level
unusual – log unusual events and all events with a higher severity level
info – log info events and all events with a higher severity level
debug – log all events.

The default logging level severity is error .

Usage Guidelines

Use this command to set the logging level for events and transactions with the TSI database server.

sftp

Configures the SFTP port number used to pull database updates from the Talos Security Intelligence (TSI) database server (Mediator).

Product

All

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Security Configuration > TSI Server Configuration

configure > security > server talos-intelligence server-name

Entering the above command sequence results in the following prompt:

[local]host_name(config-server-tsi)#

Syntax

[ no ] port port_number

no

Removes the configured port number.

`port_number`

Specifies the SFTP port number used to retrieve updates from the TSI database server (Mediator).

port_number must specified as 2222 for successful communication with the TSI database server.

Usage Guidelines

Use this command to configure the SFTP port number for the system to retrieve update files from the TSI database server.

Update files are stored locally in /hd-raid/tsi/update.

update-time

Configures the time of day when the system shall contact the Talos Security Intelligence (TSI) database server (Mediator) for security updates.

Product

All

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Security Configuration > TSI Server Configuration

configure > security > server talos-intelligence server-name

Entering the above command sequence results in the following prompt:

[local]host_name(config-server-tsi)#

Syntax

update-time hour value minute value 
no update-time

no update-time

Removes the configured time of day when the system retrieves security updates.

hour `value`

Specifies the hour of the day when the system retrieves security updates.

value must be an integer from 0 through 23.

The default is a value of zero for both hour and minute which results in a UTC of midnight.

minute `value`

Specifies the hour of the day when the system retrieves security updates.

value must be an integer from 0 through 59.

The default is a value of zero for both hour and minute which results in a UTC of midnight.

Usage Guidelines

Use this command to configure time of day when the system shall connect to the TSI database server to retrieve security updates. The security databases are updated once a day.

Example

The following command configures the system to connect to a TSI server at 11:00 PM:

update-time hour 23 minute 0

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)