flow direction in
This command configures the flow service parameters for incoming data flow in PCC-Data-Service instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Data Service Configuration
configure > context context_name > pcc-service service_name > data-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-data-service)#
Syntax
[no] flow direction in protocol {ip | tcp | udp} from {src_ip_addr[/maskbit] | any} port {src_port_num | any} to {dest_ip_addr/maskbit | any} port {dest_port_num | any}
no
Removes the configured data service flow parameters from PCC-Data-Service instance for IPCF configuration.
protocol {ip | tcp | udp }
This keyword configures the data flow parameters for specific protocol.
- ip : Sets the parameters for IP traffic.
- tcp : Sets the parameters for TCP traffic.
- UDP : Sets the parameters for UDP traffic.
from {src_ip_addr [ /maskbit ] | any } port {src_port_num | any }
This keyword configures the data flow condition parameters for specific protocol through IP address and port as source of flow.
- src_ip_addr : specifies the specific IP address in IPv4/IPv6 notation as source of flow.
- maskbit : Specifies the IP address suffix in IPv4 or IPv6 notation.
- any : specifies that flow from any source IP address/port can be analyzed or considered.
- port
src_port_num : specifies the specific source
port parameter for flow.
src_port_num is the source port number of flow and must be an integer from 1 through 65535.
to {dest_ip_addr [ /maskbit ] | any } port {dest_port_num | any }
This keyword configures the data flow condition parameters for specific protocol through IP address and port as source of flow.
- dest_ip_addr : specifies the specific IP address in IPv4/IPv6 notation as destination of flow.
- maskbit : Specifies the IP address suffix in IPv4 or IPv6 notation.
- any : specifies that flow to any destination IP address/port can be analyzed or considered.
- port
dest_port_num : specifies the specific
destination port parameter for flow.
dest_port_num is the destination port number of flow and must be an integer from 1 through 65535.
Usage Guidelines
Use this command to configure the flow service parameters for incoming data flow in PCC-Data-Service instance for IPCF Configuration.
Example
flow direction in protocol tcp from any port any to any port any