Call Control Profile Name

The name of the call control profile you chose to view.

Accounting Context Name

The name of the accounting context associated with this call control profile.

Accounting GTPP Group Name

The name of the GTTP accounting group associated with this call control profile.

Secondary GTPP Group Name

The name of the secondary GTTP accounting group associated with this S-GW call control profile.

Secondary GTPP Accounting Context Name

The accounting context used for secondary GTPP accounting.

Accounting Mode (SGW)

The method selected for S-GW accounting (GTTP [default], none, or RADIUS/Diameter).

GPRS Attach All

Indicates whether the call control profile allows or restricts attaches of all subscribers using the GPRS access type.

GPRS Attach All Failure Code

The configured GMM failure code to be sent in reject messages to GPRS mobile subscribers attempting to attach.

UMTS Attach All

Indicates whether the call control profile allows or restricts attaches of all subscribers using the UMTS access type.

UMTS Attach All Failure Code

The configured GMM failure code to be sent in reject messages to UMTS mobile subscribers attempting to attach.

GPRS RAU Intra All

Indicates whether the call control profile is configure to allow or restrict mobile subscribers with GPRS access-type extensions from the intra-SGSN RAU procedure.

GPRS RAU Intra All Failure Code

The configured GMM failure cause code that identifies the reason an intra-SGSN RAU does not occur. This GMM cause code will be sent in the reject message to the GPRS mobile subscriber.

UMTS RAU Intra All

Indicates whether the call control profile is configure to allow or restrict mobile subscribers with UMTS access-type extensions from the intra-RAU procedure.

UMTS RAU Intra All Failure Code

The configured GMM failure cause code that identifies the reason an intra-SGSN RAU does not occur. This GMM cause code will be sent in the reject message to the UMTS mobile subscriber.

GPRS RAU Inter-PLMN All

Indicates whether the call control profile is configure to allow or restrict mobile subscribers with GPRS access-type extensions from triggering RAUs between different PLMNs.

GPRS RAU Inter-PLMN All Failure Code

The configured GMM failure cause code that identifies the reason an RAU does not occur between different PLMNs. This GMM cause code will be sent in the reject message to the GPRS mobile subscriber.

UMTS RAU Inter-PLMN All

Indicates whether the call control profile is configure to allow or restrict mobile subscribers with UMTS access-type extensions from triggering RAUs between different PLMNs.

UMTS RAU Inter-PLMN All Failure Code

The configured GMM failure cause code that identifies the reason an RAU does not occur between different PLMNs. This GMM cause code will be sent in the reject message to the UMTS mobile subscriber.

GPRS RAU Inter All

Indicates whether the call control profile is configure to allow or restrict mobile subscribers with GPRS access-type extensions from the inter-SGSN RAU procedure.

GPRS RAU Inter All Failure Code

The configured GMM failure cause code that identifies the reason an inter-SGSN RAU does not occur. This GMM cause code will be sent in the reject message to the GPRS mobile subscriber.

UMTS RAU Inter All

Indicates whether the call control profile is configure to allow or restrict mobile subscribers with UMTS access-type extensions from the inter-RAU procedure.

UMTS RAU Inter All Failure Code

The configured GMM failure cause code that identifies the reason an inter-SGSN RAU does not occur. This GMM cause code will be sent in the reject message to the UMTS mobile subscriber.

Failure Code For Peer Sgsn Address Resolution Failure

The configured GMM failure cause code that indicates that the SGSN cannot resolve the IP address for a peer SGSN. This GMM cause code will be sent in the reject message to the mobile subscriber.

GPRS SMS MO All

Indicates whether the call control profile allows or restricts mobile-originated SMS messages from subscribers using the GPRS access type.

GPRS SMS MO All Failure Code

The configured GMM failure cause code that indicates that mobile-originated SMS messages from GPRS subscribers are not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

UMTS SMS MO All

Indicates whether the call control profile allows or restricts mobile-originated SMS messages from subscribers using the UMTS access type.

UMTS SMS MO All Failure Code

The configured GMM failure cause code that indicates that mobile-originated SMS messages from UMTS subscribers are not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

GPRS SMS MT All

Indicates whether the call control profile allows or restricts mobile-terminated SMS messages to subscribers using the GPRS access type.

GPRS SMS MT All Failure Code

The configured GMM failure cause code that indicates that mobile-terminated SMS messages to GPRS subscribers are not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

UMTS SMS MT All

Indicates whether the call control profile allows or restricts mobile-terminated SMS messages to subscribers using the UMTS access type.

UMTS SMS MT All Failure Code

The configured GMM failure cause code that indicates that mobile-terminated SMS messages to UMTS subscribers are not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

GPRS Primary PDP Context Activation All

Indicates whether primary PDP context activation is allowed for GPRS mobile subscribers.

GPRS Secondary PDP Context Activation All

Indicates whether secondary PDP context activation is allowed for GPRS mobile subscribers.

GPRS PDP Context Activation All Failure Code

The configured GMM failure cause code that indicates that PDP context activation by GPRS subscribers is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

UMTS Primary PDP Context Activation All

Indicates whether primary PDP context activation is allowed for UMTS mobile subscribers.

UMTS Secondary PDP Context Activation All

Indicates whether secondary PDP context activation is allowed for UMTS mobile subscribers.

UMTS PDP Context Activation All Failure Code

The configured GMM failure cause code that indicates that PDP context activation by UMTS subscribers is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

GPRS Nw Init Primary PDP Context Activation All

Indicates whether network-initiated primary PDP context activation is allowed for GPRS mobile subscribers.

GPRS Nw Init Primary PDP Ctxt Activation All Failure Code

The configured GMM failure cause code that indicates that network-initiated primary PDP context activation by GPRS subscribers is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

GPRS Nw Init Secondary PDP Ctxt Activation All

Indicates whether network-initiated secondary PDP context activation is allowed for GPRS mobile subscribers.

GPRS Nw Init Secondary PDP Ctxt Activation All Failure Code

The configured GMM failure cause code that indicates that network-initiated secondary PDP context activation by GPRS subscribers is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

UMTS Nw Init Primary PDP Context Activation All

Indicates whether network-initiated primary PDP context activation is allowed for UMTS mobile subscribers.

UMTS Nw Init Primary PDP Ctxt Activation All Failure Code

The configured GMM failure cause code that indicates that network-initiated primary PDP context activation by UMTS subscribers is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

UMTS Nw Init Secondary PDP Ctxt Activation All

Indicates whether network-initiated secondary PDP context activation is allowed for UMTS mobile subscribers.

UMTS Nw Init Secondary PDP Ctxt Activation All Failure Code

The configured GMM failure cause code that indicates that network-initiated secondary PDP context activation by UMTS subscribers is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

SRNS Intra All

Indicates whether intra-SRNS (Serving Radio Network Subsystem) relocation is allowed for mobile subscribers.

SRNS Intra All Failure Code

The configured GMM failure cause code that indicates that intra-SRNS relocation is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

SRNS Inter All

Indicates whether inter-SRNS relocation is allowed for mobile subscribers.

SRNS Inter All Failure Code

The configured GMM failure cause code that indicates that inter-SRNS relocation is not permitted. This GMM cause code will be sent in the reject message to the mobile subscriber.

S6a Hss Service

Indicates the name of the home subscriber server, if configured, that the SGSN will access via the S6a interface.

S13 Hss Service

If configured, indicates the name of the home subscriber server that the SGSN will access via the S13 interface.

S6d Hss Service

S4-SGSN only. Indicates the name of the home subscriber server, if configured, that the SGSN will access via the S6d interface to obtain subscriber-related information.

S13 prime Hss Service

S4-SGSN only. Indicates the name of the home subscriber server (HSS), if configured, that the SGSN will access via the S13' interface to perform Mobile Equipment Identity checks.

Preferred Subscription Interface

If configured, indicates the preferred subscription interface (HLR or HSS). HLR indicates that the MAP protocol will be used to exchange messages with the HLR. HSS indicates that the Diameter protocol will be used to exchange messages with the HSS.

The preferred subscription interface is displayed as hss for epc-ue if prefer subscription-interface hss epc-ue is configured under the Call Control Profile. This keyword is configured to select the HSS interface for EPC capable subscribers.

DNS GGSN Context

On an S4-SGSN, indicates the context associated for DNS lookup for a GGSN.

DNS SGSN Context

On an S4-SGSN, indicates the context associated for DNS lookup for an SGSN.

DNS PGW Context

Indicates the context associated for DNS lookup for a P-GW.

DNS SGW Context

Indicates the context associated for DNS lookup for an S-GW.

DNS MSC Context

On an MME, indicates the context associated for DNS lookup for an Mobile Switching Center (MSC).

Sgtp-service Context

The name of the context that has the applicable SGTP service for this call control profile associated with it.

Service

The name of the SGTP service associated with the context.

Authentication All-Events

Indicates whether authentication for all events (attaches, activates, and so forth) has been enabled or disabled.

Authentication Attach

Indicates whether authentication for an Attach with a local P-TMSI or Attaches with an IMSI has been enabled or disabled.

Authentication Attach (Inter RAT)

Indicates whether Attach message authentication has been enabled or disabled for re-authorizing subscribers on a change in Radio Access Type (RAT) of the subscriber's node.

Authentication Attach (Gprs only)

Indicates whether Attach message authentication has been enabled or disabled for calls from GPRS mobile subscribers.

Authentication Attach (Combined)

Indicates whether authentication for combined GPRS/IMSI Attaches has been enabled or disabled.

Authentication Activate

Indicates whether authentication for activate requests has been enabled or disabled.

Authentication Service Request

Indicates whether authentication for all service requests has been enabled or disabled.

Authentication Service Request (Signaling)

Indicates whether authentication for signaling service requests has been enabled or disabled.

Authentication Service Request (Data)

Indicates whether authentication for data service requests has been enabled or disabled.

Authentication Service Request (Page Response)

Indicates whether authentication for page response service requests has been enabled or disabled.

Authentication RAU

Indicates whether authentication for routing area updates has been enabled or disabled.

Authentication RAU (Periodic)

Indicates whether authentication for periodic RAU Requests has been enabled or disabled.

Authentication RAU (Ra update)

Indicates whether authentication for RA update RAU Requests has been enabled or disabled.

Authentication RAU (Ra update with Local Ptmsi)

Indicates whether authentication for RA update using the local P-TMSI type of RAU Requests has been enabled or disabled.

Authentication RAU (Ra update with Foreign Ptmsi)

Indicates whether authentication for RA update using foreign P-TMSI type of RAU Requests has been enabled or disabled.

Authentication RAU (Imsi Combined Update)

Indicates whether authentication for RA update RAU Requests using the inter-RAT P-TMSI has been enabled or disabled.

Authentication RAU (Combined Update)

Indicates whether authentication for RAU Requests using the local P-TMSI has been enabled or disabled.

Authentication RAU (Combined Update IRAT PTMSI)

Indicates whether authentication for RAU Requests using inter-RAT and the local P-TMSI has been enabled or disabled.

Authentication RAU (Imsi Combined Update)

Indicates whether authentication for RAU Requests using IMSI and local P-TMSI values has been enabled or disabled.

Authentication RAU (Imsi Combined Update IRAT PTMSI)

Indicates whether authentication for RAU Requests using IMSI values, inter-RAT, and the local P-TMSI has been enabled or disabled.

Authentication Detach

Indicates whether authentication for Detach Requests has been enabled or disabled.

Authentication SMS

Indicates whether authentication for all SMS messages has been enabled or disabled.

Authentication SMS (MO-SMS)

Indicates whether authentication for mobile-originated SMS messages has been enabled or disabled.

Authentication SMS (MT-SMS)

Indicates whether authentication for mobile-terminated SMS messages has been enabled or disabled.

Regional Subscription Restriction Failure Code Value

The configured GMM failure cause code that indicates that mobile subscriber lacks the required subscription to place calls to the region. This GMM cause code will be sent in the reject message to the mobile subscriber.

ARD-Checking

Indicates whether access restriction data (ARD) checking in incoming subscriber data (ISD) messages has been enabled or disabled.

ARD Failure Code

The configured GMM failure cause code that indicates the incoming subscriber data has failed ARD checking. This GMM cause code will be sent in the reject message to the mobile subscriber.

Access Restriction Data

Indicates if the eutran-not-allowed parameter is enabled to verride the "eutran-not-allowed" flag received from the HLR/HSS in the ISD/ULA request for the Access Restriction Data (ARD) parameter. The helps ensure that an SRNS relocation handover to E-UTRAN is not allowed for E-UTRAN capable UEs that have only a UTRAN/GERAN roaming agreement.

Zone-Code Check

Indicates whether zone code checking has been enabled or disabled.

Usage of Auth Vectors From Old Sgsn

Indicates whether the ability of an SGSN to receive authorization vectors from other SGSNs has been enabled or disabled.

SGSN Address

Provides information on how the peer SGSN is configured, including the peer IP address, RAC and LAC values or RNC_ID, and interface type.

PEER-MME

Provides information on how the peer MME is configured, including the peer IP address, MME Group ID or TAC, and interface type.

Order of Preference for Integrity Algorithm is

The integrity algorithm that receives the first priority.

Order of Preference for Encryption Algorithm is

The encryption algorithm that receives the first priority.

Order of Preference for Gprs Ciphering Algorithm is

The GPRS ciphering algorithm that receives the first priority.

PTMSI-signature allocation

Indicates whether P-TMSI signature allocation has been enabled or disabled.

PTMSI-Signature-Realloc Interval value UMTS

The time interval (in minutes) for skipping the P-TMSI signature service/RAU/attach request message procedure for UMTS mobile subscribers.

PTMSI-Signature-Realloc Interval value GPRS

The time interval (in minutes) for skipping the P-TMSI signature service/RAU/attach request message procedure for GPRS mobile subscribers.

PTMSI-Signature-Realloc Frequency value UMTS

How many times P-TMSI signature reallocation for service requests can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc Frequency value GPRS

How many times P-TMSI signature reallocation for service requests can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc Attach Frequency value UMTS

How many times P-TMSI signature reallocation for Attach requests can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc Attach Frequency value GPRS

How many times P-TMSI signature reallocation for Attach requests can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc RAU (Generic) Frequency value UMTS

How many times P-TMSI signature reallocation for routing area updates can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc RAU (Generic) Frequency value GPRS

How many times P-TMSI signature reallocation for routing area updates can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc RAU Periodic Frequency value UMTS

How many times P-TMSI signature reallocation for periodic routing area updates can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc RAU Periodic Frequency value GPRS

How many times P-TMSI signature reallocation for periodic routing area updates can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc RAU RA Update Frequency value UMTS

How many times P-TMSI signature reallocation for routing area update RA updates can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc RAU RA Update Frequency value GPRS

How many times P-TMSI signature reallocation for routing area update RA updates can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc RAU Combined Update Frequency value UMTS

How many times P-TMSI signature reallocation for combined requests can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc RAU Combined Update Frequency value GPRS

How many times P-TMSI signature reallocation for combined requests can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc RAU Imsi Combined Update Frequency value UMTS

How many times P-TMSI signature reallocation for combined RAU updates with IMSI values can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc RAU Imsi Combined Update Frequency value GPRS

How many times P-TMSI signature reallocation for combined RAU updates with IMSI values can be skipped for GPRS mobile subscribers.

PTMSI-Signature-Realloc Ptmsi-Reallocation-Cmd Update Frequency value UMTS

How many times P-TMSI signature reallocation during PTMSI reallocation can be skipped for UMTS mobile subscribers.

PTMSI-Signature-Realloc Ptmsi-Reallocation-Cmd Update Frequency value GPRS

How many times P-TMSI signature reallocation during PTMSI reallocation can be skipped for GPRS mobile subscribers.

PTMSI-Realloc Attach

Indicates whether P-TMSI reallocation has been enabled or disabled.

PTMSI-Realloc Interval

The time interval (in minutes) for skipping the P-TMSI reallocation during the service/RAU/attach request message procedure.

PTMSI-Realloc Frequency

How many times P-TMSI reallocation can be skipped during service/RAU/attach request message procedure.

PTMSI-Realloc RAU

Indicates whether P-TMSI reallocation during routing area updates has been enabled or disabled.

PTMSI-Realloc RAU (Periodic)

Indicates whether P-TMSI reallocation during periodic routing area updates has been enabled or disabled.

PTMSI-Realloc RAU (Periodic) Frequency value

How many times P-TMSI reallocation can be skipped during the periodic RAU message procedure.

PTMSI-Realloc RAU (Ra-Update)

Indicates whether P-TMSI reallocation during the RA update RAU request procedure has been enabled or disabled.

PTMSI-Realloc RAU (Ra-Update) Frequency

How many times P-TMSI reallocation can be skipped during the RA update RAU message procedure.

PTMSI-Realloc RAU (Combined-Update)

Indicates whether P-TMSI reallocation during the RAU combined update procedure has been enabled or disabled.

PTMSI-Realloc RAU (Combined-Update) Frequency

How many times P-TMSI reallocation can be skipped during the RAU combined update message procedure.

PTMSI-Realloc RAU (Combined-Update with IMSI attach)

Indicates whether P-TMSI reallocation during the RAU combined update with IMSI procedure has been enabled or disabled.

PTMSI-Realloc RAU (Combined-Update with IMSI) Frequency

How many times P-TMSI reallocation can be skipped during the RAU combined update with IMSI message procedure.

PTMSI-Realloc Service Request (Signalling)

Indicates whether P-TMSI reallocation during signaling service requests has been enabled or disabled.

PTMSI-Realloc Service Request (Signalling) Freq

How many times P-TMSI reallocation can be skipped during the signaling service request message procedure.

PTMSI-Realloc Service Request (Data)

Indicates whether P-TMSI reallocation during data service requests has been enabled or disabled.

PTMSI-Realloc Service Request (Data) Freq

How many times P-TMSI reallocation can be skipped during the data service request message procedure.

PTMSI-Realloc Service Request (Page Response)

Indicates whether P-TMSI reallocation during page response service requests has been enabled or disabled.

PTMSI-Realloc Service Request (Page Response) Freq

How many times P-TMSI reallocation can be skipped during the page response service request message procedure.

Inactivity detection for establishing pdp contexts

Indicates whether an SGSN will be periodic polled to verify that it can accept requests to establish a PDP context.

Inactivity detection for establishing pdp contexts - Timer

The timeout value in milliseconds for determining that a SGSN is unresponsive.

Inactivity detection for establishing pdp contexts - Action

The action to be taken if a SGSN is declared unresponsive.

Monitor Re-attaches after Inactivity Detach

Indicates whether the SGSN will be monitored to determine if it has become responsive again after an inactivity timeout and detach.

Charging Characteristics Prefer Local

When enabled, indicates whether the call-control profile prefers the charging characteristics settings from the call control profile instead of the charging characteristics received from the HLR.

Charging Characteristics Behavior

The behavior bit in charging characteristics provided by the call control profile when the HLR does not provide a value.

Charging Characteristics Profile-Index

The charging characteristics profile index specified by the call control profile, such as 4 for prepaid billing or 8 for normal billing.

Charging Characteristics Behavior No Records

The behavior bit in charging characteristics that is used to determine that no accounting records will be generated.

APN restriction

If this feature is enable, the SGSN sends the maximum APN restriction value in every CPC Request message sent to the GGSN

UMTS Gmm-Information

When this feature is enabled, indicates that GPRS mobility management (GMM) parameters will be included in message to UMTS mobile subscribers.

GPRS Gmm-Information

When this feature is enabled, indicates that GMM parameters will be included in message to GPRS mobile subscribers.

User Equipment Identity Retrieval

Indicates whether International Mobile Equipment Identity (IMEI) or software version (SV) retrieval and validation has been enabled or disabled.

MAP UGL Message. Include Access Type Private Extension

The specific access-type private extension included in GPRS Location Update (GLU) request MAP messages.

MAP UGL Message. Include IMEISV

The specific International Mobile equipment Identity-Software Version (IMEI-SV) information included in GLU request MAP messages.

MAP MO-FWD-SM Message. Include IMSI

Indicates if the inclusion of the IMSI of the originating subscriber in the mobile-originated SM transfer is enabled or disabled. This parameter is included when the sending entity (MSC or SGSN) supports mobile number portability (MNP). This IMSI IE is required in the in MAP-MO-FORWARD-SHORT-MESSAGE in countries where MNP is deployed.

Reuse of authentication triplets

Indicates whether the reuse of authentication triplets in the event of a failure has been enabled or disabled.

Re-Authentication

Indicates whether the re-authentication feature, which instructs the SGSN to retry authentication with another RAND in situations where failure of the first authentication has occurred, has been enabled or disabled.

Direct Tunnel

Indicates if the SGSN allows direct tunneling if the direct tunneling is supported by destination node.

GTPU Fast Path

Indicates whether Fast Path support for network processing unit (NPU) processing of GTP-U packets of user sessions has been enabled or disabled.

Super Charger

Indicates whether the SGSN's ability to work with a super-charged network is enabled or disabled. By enabling the super charger functionality for 2G or 3G connections controlled by an operator policy, the SGSN changes the hand-off and location update procedures to reduce signaling traffic management.

Sending Radio Access Technology (RAT) IE

When this feature is enabled, the SGSN sends RAT information elements (IEs) within GTP messages.

Sending User Location Information (ULI) IE

When this feature is enabled, the SGSN sends ULI IEs within GTP messages.

Sending IMEISV IE

When this feature is enabled, the SGSN includes the IMEISV values of the mobile subscriber when sending GTP messages of the type "Create PDP Context Request".

Derive IMEISV from IMEI

When this feature is enabled, the SGSN sends the IMEI to the GGSN as an IMEI-SV.

Sending MS Time Zone IE

When this feature is enabled, the SGSN sends the mobile subscribers timezone IE in GTP messages of the type "Create PDP Request" and "Update PDPContext Request".

Treat as HPLMN

When this feature is enabled, the MME or SGSN treats an IMSI series as coming from the home PLMN.

Idle-mode-Signaling-Reduction (ISR) for UMTS

Indicates if the Idle-Mode-Signaling-Reduction (ISR) feature is enabled for UMTS (3G) subscribers. When ISR is enabled, the MME and SGSN allow the UE to be registered simultaneously in both the UMTS network on the SGSN and on the E-UTRAN on the MME. A separate feature license is required to enable ISR.

Idle-mode-Signaling-Reduction (ISR) for GPRS

Indicates if the Idle-Mode-Signaling-Reduction (ISR) feature is enabled for GPRS (2G) subscribers. When this feature is enabled, the MME and SGSN allow the UE to be registered simultaneously in both the GPRS network on the SGSN and on the E-UTRAN on the MME. A separate feature license is required to enable ISR.

Location Reporting for UMTS

When this feature is enabled, the MME can query and receive UE location reports from an eNodeB.

Location Reporting for GPRS

When this feature is enabled, the MME can query and receive UE location reports from an eNodeB.

SMS in MME

Displays the configured value (preferred / not-preferred) for SMS in MME.

SMSC Address

Displays the configured SMSC address.

Send SMS Subscription Request to HSS

Indicates whether the SMS Subscription Request to HSS is enabled or disabled.

Send SMS Subscription Notification to UE

Indicates whether the SMS Subscription Notification to UE is enabled or disabled.

MME S6a Message Options

Notify Req (Trigger : MNRF flag)

Indicates whether the MNRF flag trigger for Notify Request is enabled or disabled

MME SGd Message Options

Alert SC Request (Trigger : MNRF flag)

Indicates whether the MNRF flag trigger for Alert SC Request is enabled or disabled.

EPS Attach Restrict

Voice Unsupported

When this feature is enabled, the MME can restrict UE attaches when the network does not support voice, for example when Voice over IMS is not supported in the network and the UE does not support CSFB.

IMSI Attach Fail

When this feature is enabled, the MME can restrict UE attaches when the IMSI Attach fails.

EPS Network

N1 mode

This sub-group displays interworking with 5GS for UEs supporting N1 mode.

5GS to EPS handover using N26 interface

When this setting is enabled under N1 mode, the MME allows 5GS-EPS interworking with N26 interface.

CSFB Restrictions

SMS Only

When this setting is enabled, the MME allows SMS-only attaches for Circuit Switched Fall Back (CSFB) services.

Not Allowed

When this setting is enabled, the MME disallows CSFB services (both SMS-only and voice services).

Not Preferred

When this setting is enabled, the MME returns "not-preferred" for CSFB services for combined EPS/IMSI attach requests.

Network Feature Support

IMS Voice Over PS

Indicates whether IMS Voice over Packet-Switched information element (IE) is supported as part of the MME (Network) Feature

Qos

Indicates the transmission of quality of service (QoS) parameters has been enabled or disabled.

AMBR

Indicates whether an aggregate maximum bit rate (AMBR) will be enforced for user equipment.

Gn/Gp ARP

Indicates whether Gn-Gp pre-release 8 ARP and pre-emption parameters will be enforced or not.

High Priority (H) (Default)

The high-priority (address retention protocol) ARP value used for QoS.

Medium Priority (M) (Default)

The medium-priority ARP value used for QoS.

Gn/Gp Pre-Emption Capabilities (Default)

The pre-emption capability criteria for PDP contexts imported from an SGSN on Gn/Gp interfaces.

Gn/Gp Pre-Emption Vulnerabilities (Default)

The pre-emption vulnerability criteria for PDP contexts imported from an SGSN on Gn/Gp interfaces.

GPRS PDP Type IPV4V6 Override

Indicates whether the MME is configured to override the requested Packet Data Network (PDN) type (IPv4 or IPv6) based on the inbound roamer PLMN.

UMTS PDP Type IPV4V6 Override

Indicates whether the MME is configured to override the requested Packet Data Network (PDN) type (IPv4 or IPv6) based on the inbound roamer PLMN.

EPS PDN Type IPV4V6 Override

Indicates whether the MME is configured to override the requested Packet Data Network (PDN) type (IPv4 or IPv6) based on the inbound roamer PLMN.

RFSP

Displays the configuration of the rfsp-override command which the MME uses to control the override of RAT Frequency Selection Priority (RFSP).

Rfsp-override eutran-ho-restricted

Displays the configured value for RAT frequency selection priority when Handover to EUTRAN is restricted. This value overrides the RFSP ID value sent by the HLR/HSS in an EPS subscription.

PDN Type IPv6 Denied

Indicates whether the MME is enabled to allow only IPv4 addresses to a PDN connection.

Cause Code Mapping

Restricted zone code

Displays the emm-cause-code to be returned to the UE when the UE requests access to a restricted zone during an EMM procedure.

Congestion

Displays the emm-cause-code to be returned to the UE when the system has detected a congestion condition during an EMM procedure.

Newcall policy restrict

Displays the emm-cause-code to be returned to the UE when the policy restricts new calls.

APN mismatch

Displays the emm-cause-code to be returned to the UE when the system has detected an APN mismatch condition during an EMM procedure.

VLR down

Displays the emm-cause-code to be returned to the UE when the system has detected a VLR down condition during an EMM procedure.

VLR unreachable

Displays the emm-cause-code to be returned to the UE when the system has detected a VLR unreachable condition during an EMM procedure.

Auth failure

Displays the emm-cause-code to be returned to the UE when an authentication failure occurs.

PEER NODE unknown

Displays the emm-cause-code to be returned to the UE when peer node resolution is not successful.

CTXT transfer fail SGSN

Displays the emm-cause-code to be returned to the UE when a UE context transfer failure from a peer SGSN occurs.

CTXT transfer fail MME

Displays the emm-cause-code to be returned to the UE when a UE context transfer failure from a peer MME occurs.

HSS unavailable

Displays the emm-cause-code to be returned to the UE when HSS resolution fails in the MME or the HSS does not respond in time.

SGW selection failure

Displays the emm-cause-code to be returned to the UE when a failure occurs during S-GW selection.

PGW selection failure

Displays the emm-cause-code to be returned to the UE when a failure occurs during P-GW selection.

GW unreachable Attach

Displays the emm-cause-code to be returned to the UE when a gateway (S-GW or P-GW) does not respond during an EMM Attach procedure.

GW unreachable TAU

Displays the emm-cause-code to be returned to the UE when a gateway (S-GW or P-GW) does not respond during an EMM TAU procedure.

NO bearers active

Displays the emm-cause-code to be returned to the UE when the context received from a peer SGSN (during a TAU procedure) does not contain any active PDP contexts

SGSN Core Network Interface Selection

Displays the SGSN Core Network Interface selection.

SGSN Core Network Interface Type

Displays the interface type selected as either Gn or S4.

S4 for EPC Capable Devices

Displays the configuration as either Always or When EPS Subscription Available , based on the CLI configured in the command sgsn-core-nw-interface in the Call-Control Profile.

S4 for Non-EPC Capable Devices

Displays the configuration as Never or Always or When EPS Subscription Available , based on the CLI configured in the command sgsn-core-nw-interface in the Call-Control Profile.

Uplink data status IE in service request

This field displays whether the Uplink Data Status IE is Processed or Ignored.

GUTI Reallocation

This parameter indicates if GUTI Reallocation is configured. The configured status is displayed as "Enabled" or "Disabled".

GUTI Reallocation Frequency

Displays the value of GUTI Reallocation Frequency in number of NAS requests.

GUTI Reallocation Periodicity

Displays the value of GUTI Reallocation Periodicity in minutes.

Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Frequency

This parameter indicates if Selective Authentication frequency for all events is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Frequency Value

Displays the value of the configured Selective Authentication Frequency for all events.

Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Periodicity

This parameter indicates if Selective Authentication periodicity for all events is configured. If the Periodicity is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for all events.

Authentication Attach ANY Frequency

This parameter indicates if Selective Authentication frequency for Attach procedure is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Attach ANY (UMTS/GPRS/EUTRAN) Frequency Value

Displays the value of the configured Selective Authentication Frequency for Attach procedures.

Authentication Attach ANY Periodicity

This parameter indicates if Selective Authentication periodicity for Attach procedure is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Attach ANY Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Attach procedures.

Authentication Attach Inter-rat ANY (UMTS/GPRS/EUTRAN) Frequency

This parameter indicates if Selective Authentication frequency for Attach during Inter-RAT procedure is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Attach Inter-rat ANY (UMTS/GPRS/EUTRAN) Frequency Value

Displays the value of the configured Selective Authentication Frequency for Attach during Inter-RAT procedures.

Authentication Attach Inter-rat ANY Periodicity

This parameter indicates if Selective Authentication periodicity for Attach during Inter-RAT procedure is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Attach Inter-rat ANY Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Attach during Inter-RAT procedures.

Authentication Service Req Frequency

This parameter indicates if Selective Authentication frequency for Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Frequency Value

Displays the value of the configured Selective Authentication Frequency for Service Requests.

Authentication Service Req Periodicity

This parameter indicates if Selective Authentication periodicity for Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Service Requests.

Authentication Service Req Data Frequency

This parameter indicates if Selective Authentication frequency for Data Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Data Frequency Value

Displays the value of the configured Selective Authentication Frequency for Data Service Requests.

Authentication Service Req Data Periodicity

This parameter indicates if Selective Authentication periodicity for Data Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Data Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Data Service Requests.

Authentication Service Req Signaling Frequency

This parameter indicates if Selective Authentication frequency for Signaling Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Signaling Frequency Value

Displays the value of the configured Selective Authentication Frequency for Signaling Service Requests.

Authentication Service Req Signaling Periodicity

This parameter indicates if Selective Authentication periodicity for Signaling Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Signaling Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Signaling Service Requests.

Authentication Service Req Page Response Frequency

This parameter indicates if Selective Authentication frequency for Page Response Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Page Response Frequency Value

Displays the value of the configured Selective Authentication Frequency for Page Response Service Requests.

Authentication Service Req Page Response Periodicity

This parameter indicates if Selective Authentication periodicity for Page Response Service Requests is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Service Req Page Response Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Page Response Service Requests.

Authentication TAU Frequency

This parameter indicates if Selective Authentication frequency for TAU Procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Frequency Value

Displays the value of the configured Selective Authentication Frequency for TAU Procedures.

Authentication TAU Periodicity

This parameter indicates if Selective Authentication periodicity for TAU Procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for TAU Procedures.

Authentication Inter-RAT TAU Frequency

This parameter indicates if Selective Authentication frequency for TAU during Inter-RAT procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Frequency Value

Displays the value of the configured Selective Authentication Frequency for TAU during Inter-RAT procedures.

Authentication TAU Inter-rat Periodicity

This parameter indicates if Selective Authentication periodicity for TAU during Inter-RAT procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Inter-rat Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for TAU during Inter-RAT procedures.

Authentication Intra-RAT TAU Frequency

This parameter indicates if Selective Authentication frequency for TAU during Intra-RAT procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Intra-RAT TAU Frequency Value

Displays the value of the configured Selective Authentication Frequency for TAU during Intra-RAT procedures.

Authentication TAU Intra-rat Periodicity

This parameter indicates if Selective Authentication periodicity for TAU during Intra-RAT procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Intra-rat Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for TAU during Intra-RAT procedures.

Authentication Normal TAU Frequency

This parameter indicates if Selective Authentication frequency for Normal TAU procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Normal TAU Frequency Value

Displays the value of the configured Selective Authentication Frequency for Normal TAU procedures.

Authentication TAU Normal Periodicity

This parameter indicates if Selective Authentication periodicity for Normal TAU procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Normal Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Normal TAU procedures.

Authentication Periodic TAU Frequency

This parameter indicates if Selective Authentication frequency for Periodic TAU procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication Periodic TAU Frequency Value

Displays the value of the configured Selective Authentication Frequency for Periodic TAU procedures.

Authentication TAU Periodic Periodicity

This parameter indicates if Selective Authentication periodicity for Periodic TAU procedures is configured. If the frequency is configured the status is displayed as "Enabled" or it is displayed as "Disabled".

Authentication TAU Periodic Periodicity Value

Displays the value of the configured Selective Authentication Periodicity for Periodic TAU procedures.

Mapped SM Cause For Req APN not sup in current RAT and PLMN combination

Displays the mapped SM caused code for APN request not supported in current RAT and PLMN combination.

Cause Code Mapping

Displays the cause code mapping information.

APN not supported PLMN-RAT esm-proc

Displays the cause code configured for APN not supported PLMN-RAT esm-proc.

APN not supported PLMN-RAT Attach

Displays the cause code configured for APN not supported PLMN-RAT in attach requests.

APN not supported PLMN-RAT TAU

Displays the cause code configured for APN not supported PLMN-RAT in TAU requests.

Paging priority to be sent to eNodeB

If paging priority support is enabled this field displays the configured value of paging priority sent to eNodeB for CS paging. For example, if the paging priority value is set to "1", this field is displayed as "Enabled with value: 1". If paging priority support is disabled this field is displayed as "Disabled".

MPS CS priority

The MPS CS priority is displayed as either "Subscribed" or "None" based on the configuration.

MPS EPS priority

The MPS EPS priority is displayed as either "Subscribed" or "None" based on the configuration.

Paging priority to be sent to eNodeB for CS

Displayed as "Enabled" with value if paging-priority cs value is configured.

Paging priority mapping for CS

Displayed as “Enabled” with emlpp-priority to paging-priority mapping information if mapping is configured, otherwise it is displayed as “Disabled”.

Paging priority mapping for EPS

Displayed as “Enabled” with ARP to paging-priority mapping information if mapping is configured, otherwise it is diplayed as “Disabled”.

Handover Restriction

Displayed as "Enabled" if HO restriction is configured, else it is displayed as "Disabled".

SCEF Service

Displays the name of the configured SCEF service.

Attach without PDN Support for WB-EUTRAN

Indicates whether Attach without PDN for WB-EUTRAN is enabled or disabled.

Attach without PDN Support for NB-IoT

Indicates whether Attach without PDN for NB-IoT is enabled or disabled.

IE Override:

S6A Interface

Indicates whether the S6a interface is enabled or disabled.

Supported RAT Type AVP

Displays the configured RAT type AVP IE.

Extended DRX

Specifies the following eDRX parameters:

• Paging Time Window

• eDRX Cycle Length

• Downlink Buffer Duration in DDN Ack

• DL Buffering Suggested Packet Count in DDN Ack

CIoT Optimisation:

CP-Optimisation

Indicates whether CP CIoT optimization is enabled or disabled.

Access-Type

If CP CIoT optimization is enabled, displays the access type based on the configuration as: NB-IoT, or both WB-EUTRAN and NB-IoT.

If CP CIoT optimization is disabled, this field displays N/A.

Serving PLMN Rate Control

Indicates whether serving PLMN rate control for CP CIoT optimization is enabled or disabled.

UL Rate

Displays the maximum number of data NAS PDUs that the UE sends in uplink path per deci-hour (6 minutes).

DL Rate

Displays the maximum number of data NAS PDUs that the P-GW or SCEF sends in the downlink path to the UE per deci-hour (6 minutes).

Gtp Tunnel ECN Ingress Mode

Displays the mode of ECN configured for the GTP tunnel.

ESM-T3396 Timer

This fields displays "Not Configured" if the ESM T3396 timeout is not configured for any cause code.

If the ESM T3396 timeout is configured for a cause code, the following two fields display the configured values.

Value for Cause Code UNKNOWN OR MISSING APN(27)

This fields displays the configured T3396 timeout value in seconds for cause code value 27.

Value for Cause Code INSUFFICIENT RESOURCES(26)

This fields displays the configured T3396 timeout value in seconds for cause code value 26.

SRVCC

SRVCC Service

This fields displays the status of the SRVCC service, that is, if SRVCC handovers are authorized or unauthorized, in a roaming network.

IMS APN

Displays IMS APN is "Configured" or "Not Configured".

Access Policy

Displays the configured access-policy name.

If access-policy is not associated with call-control profile, this field displays "Not Defined".

Sending Ue-Usage-Type in CSR

Enables the sending of mapped Ue-Usage to Dedicated Core Network Configuration.