Counters

Description

uplnk-bytes-gtpv2-s2a

Indicates the total number of bytes sent from the APN for a GTPV2 based S2A RAT type towards the Internet/PDN on the Gi interface.

dnlnk-bytes-gtpv2-s2a

Indicates the total number of bytes received for a GTPV2 based S2A RAT type on the Gi interface for the APN.

uplnk-bytes-gtpv2-s2b

Indicates the total number of bytes sent from the APN for a GTPV2 based S2B RAT type towards the Internet/PDN on the Gi interface.

dnlnk-bytes-gtpv2-s2b

Indicates the total number of bytes received for a GTPV2 based S2B RAT type on the Gi interface for the APN.

dyn-ipv4-success-eutran

Indicates the total number of IPv4 contexts requesting dynamically assigned IP addresses that were successfully setup for a EUTRAN RAT type.

dyn-ipv4-success-gtpv2-s2a

Indicates the total number of IPv4 contexts requesting dynamically assigned IP addresses that were successfully setup for a GTPV2 based S2A RAT type.

dyn-ipv4-success-gtpv2-s2b

Indicates the total number of IPv4 contexts requesting dynamically assigned IP addresses that were successfully setup for a GTPV2 based S2B RAT type.

dyn-ipv6-success-eutran

Indicates the total number of IPv6 contexts requesting dynamically assigned IP addresses that were successfully setup for a EUTRAN RAT type.

dyn-ipv6-success-gtpv2-s2a

Indicates the total number of IPv6 contexts requesting dynamically assigned IP addresses that were successfully setup for a GTPV2 based S2A RAT type

dyn-ipv6-success-gtpv2-s2b

Indicates the total number of IPv6 contexts requesting dynamically assigned IP addresses that were successfully setup for a GTPV2 based S2B RAT type.

dyn-ipv4v6-success-eutran

Indicates the total number of IPv4v6 contexts requesting dynamically assigned IP addresses that were successfully setup for a EUTRAN RAT type.

dyn-ipv4v6-success-gtpv2-s2a

Indicates the total number of IPv4v6 contexts requesting dynamically assigned IP addresses that were successfully setup for a GTPV2 based S2A RAT type.

dyn-ipv4v6-success-gtpv2-s2b

The total number of IPv4v6 contexts requesting dynamically assigned IP addresses that were successfully setup for a GTPV2 based S2B RAT type.

upc-rx-geran

Indicates the total number of Update PDP Context Request messages received from the SGSN(s) for a GERAN RAT type per APN.

upc-tx-geran

Indicates the total number of Update PDP Context Request messages sent to the SGSN(s) for a GERAN RAT type per APN.

upc-rx-accept-geran

Indicates the total number of Update PDP Context Response messages received from SGSN(s) containing a cause value of 128 (80H, Request accepted) for a GERAN RAT type per APN.

upc-tx-accept-geran

Indicates the total number of Update PDP Context Response messages sent to the SGSN(s) containing a cause value of 128 (80H, Request accepted) for a GERAN RAT type per APN.

upc-rx-utran

Indicates the total number of Update PDP Context Request messages received from the SGSN(s) for a UTRAN RAT type per APN.

upc-tx-utran

Indicates the total number of Update PDP Context Request messages sent to the SGSN(s) for a UTRAN RAT type per APN.

upc-rx-accept-utran

Indicates the total number of Update PDP Context Response messages received from SGSN(s) containing a cause value of 128 (80H, Request accepted) for a UTRAN RAT type per APN.

upc-tx-accept-utran

Indicates the total number of Update PDP Context Response messages sent to the SGSN(s) containing a cause value of 128 (80H, Request accepted) for a UTRAN RAT type per APN.

cpc-accept-geran

Indicates the total number of Create PDP Context Response messages transmitted containing a cause value of 128 (80H, Request accepted)for a GERAN RAT type per APN.

cpc-accept-utran

Indicates the total number of Create PDP Context Response messages transmitted containing a cause value of 128 (80H, Request accepted) for a UTRAN RAT type per APN.

cpc-nomem-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 212 (D4H, No memory is available) for a GERAN RAT type per APN.

cpc-nomem-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 212 (D4H, No memory is available) for a UTRAN RAT type per APN.

cpc-noresource-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 199 (C7H, No resources available) for a GERAN RAT type per APN.

cpc-noresource-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 199 (C7H, No resources available) for a UTRAN RAT type per APN.

cpc-srv-not-supp-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 200 (C8H, service not Supported) for a GERAN RAT type per APN.

cpc-srv-not-supp-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 200 (C8H, service not Supported) for a UTRAN RAT type per APN.

cpc-sys-fail-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 204 (CCH, System failure) for a GERAN RAT type per APN.

cpc-sys-fail-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 204 (CCH, System failure) for a UTRAN RAT type per APN.

cpc-auth-fail-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 209 for a GERAN RAT type per APN.

cpc-auth-fail-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 209 for a UTRAN RAT type per APN.

cpc-no-apn-subscription-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent for a GERAN RAT type per APN because there was no apn subscription.

cpc-no-apn-subscription-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent for a UTRAN RAT type per APN because there was no apn subscription.

cpc-missing-apn-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 219 (DBH, Missing or unknown APN) for a GERAN RAT type per APN.

cpc-missing-apn-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 219 (DBH, Missing or unknown APN) for a UTRAN RAT type per APN.

cpc-addr-occupied-geran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 211 (D3H, All dynamic PDP addresses are occupied) for a GERAN RAT type per APN.

cpc-addr-occupied-utran

Indicates the total number of reject Create PDP Context Response messages transmitted to the SGSN(s) sent with a cause code of 211 (D3H, All dynamic PDP addresses are occupied) for a UTRAN RAT type per APN.

Counters

Description

dpca-imsa-exp-late-overlapping-request

Displays the total number of times the diameter experimental result code DIAMETER_ERROR_LATE_OVERLAPPING_REQUEST(5453) is received in CCA message.

dpca-imsa-exp-timed-out-request

Displays the total number of times the diameter experimental result code DIAMETER_ERROR_TIME_OUT_REQUEST(5454) is received in CCA message.

s11-tun-recv-modbearerreq-wps

Shows the total number of tunnel modify bearer request messages received by the system for WPS subscriber on the s11 interface.

s11-tun-sent-modbearerresp-wps

Shows the total number of tunnel modify bearer response messages sent by the system for WPS subscriber on the s11 interface.

s11-tun-sent-crebearerreq-wps

Shows the total number of tunnel create bearer request messages sent by the system for WPS subscriber on the s11 interface.

s11-tun-recv-crebearerresp-wps

Shows the total number of tunnel create bearer response messages received by the system for WPS subscriber on the s11 interface.

s11-tun-sent-updbearerreq-wps

Shows the total number of tunnel update bearer request messages sent by the system for WPS subscriber on the s11 interface s11.

s11-tun-recv-updbearerresp-wps

Shows the total number of tunnel update bearer response messages received by the system for WPS subscriber on the s11 interface .

tun-sent-cresessreq-wps

Shows the total number of tunnel create session request messages sent by the system for WPS subscriber on the S5/S8 interface .

tun-recv-updbearerresp-wps

Shows the total number of tunnel update bearer response messages received by the system for WPS subscriber on the S5/S8 interface.

tun-sent-updbearerresp-wps

Shows the total number of tunnel update bearer response messages sent by the system for WPS subscriber on the S5/S8 interface .

plmn-mcc

The PLMN MCC for which this statistics is collected. This is a key variable.

plmn-mnc

The PLMN MNC for which this statistics is collected. This is a key variable.

plmn-totsetup-success

Indicates that total setup success.

plmn-tot-success-handoff

Indicates that total number of successful LTE to Wi-Fi handoffs.

plmn-tot-handoff-attempts

Indicates that total number of LTE to Wi-Fi handoff attempts.

plmn-totsetup-attempt

Indicates that total setup attempt.

plmn-totattempt-failure

Indicates that total failure attempts.

plmn-totgtp-curr-ue-in-sys

Indicates that total GTP active UEs in the system.

plmn-curses

Indicates that total number of current ePDG sessions.

plmn-tot-success-handoff

Indicates that total number of successful handoff sessions.

plmn-pgw-fallback-succeeded

Indicates that total number of P-GW Fallback sessions succeeded.

plmn-pgw-fallback-attempted

Indicates that total number of P-GW Fallback sessions attempted.

plmn-reauthor-success

Indicates that total number of reauthorization success messages.

plmn-reauthor-attempt

Indicates that total number of reauthorization attempted messages.

plmn-eap-rxsuccsrvrpassthru

Indicates that total number of successful EAP server statistics received on pass through mode.

plmn-eap-rxttlsrvrpassthru

Indicates that total number of EAP server statistics received on pass through mode.

plmn-sess-disconnect-remote

Indicates that total number of Remote disconnect sessions at PLMN level.

plmn-sess-disconnect-admin

Indicates that total number of Administrator disconnect sessions at PLMN level.

plmn-sess-disconnect-idle-timeout

Indicates that total number of disconnect sessions due to idle timeout reasons.

plmn-sess-disconnect-abs-timeout

Indicates that total number of disconnect sessions due to absolute timeout reasons.

plmn-sess-disconnect-longdur-timeout

Indicates that total number of disconnect sessions due to long duration timeout.

plmn-sess-disconnect-sesssetup-timeout

Indicates that total number of session disconnects due to setup timeout.

plmn-sess-disconnect-noresource

Indicates that total number of session disconnects due to non-availability of resources.

plmn-sess-disconnect-authfail

Indicates that total number of session disconnects due to authentication failure.

plmn-sess-disconnect-flowadd-failure

Indicates that total number of session disconnects due to flow add failure.

plmn-sess-disconnect-invalid-dest

Indicates that total number of session disconnects due to invalid destination context.

plmn-sess-disconnect-srcaddr-violation

Indicates that total number of session disconnects due to source address violation.

plmn-sess-disconnect-lmarevoc

Indicates that total number of session disconnects due to LMA revocation.

plmn-sess-disconnect-dupreq

Indicates that total number of session disconnects due to duplicate requests.

plmn-sess-disconnect-addrassign-failure

Indicates that total number of sessions disconnects due to address assignation failure.

plmn-sess-disconnect-handoff

Indicates that total number of sessions disconnects due to LTE and other handoff

plmn-sess-disconnect-misc

Indicates that total number of session disconnects due to miscellaneous reasons.

plmn-ikev2-auth-p1succ

Indicates that total number of IKEv2 authentication phase 1 success messages.

plmn-ikev2-auth-p1req

Indicates that total number of IKEv2 authentication phase 1 request messages.

plmn-ikev2-auth-p1fail

Indicates that total number of IKEv2 authentication phase 1 failure messages.

plmn-ikev2-ikesadelrep-recv

Indicates that total number of IKEv2 SA delete request received.

plmn-ikev2-ikesadelrep-sent

Indicates that total number of IKEv2 SA delete requests sent.

plmn-der-req-id-sent

Indicates total number of DER messages transmitted.

plmn-dea-chal-rcvd

Indicates that total number of DEA Challenge messages received.

plmn-dea-acpt-rcvd

Indicates that total number of DEA Accept messages received.

plmn-diamauth-msg-rar

Indicates that total number of RAR messages received.

plmn-diamauth-msg-raa

Indicates that total number of RAA messages transmitted.

plmn-diamauth-msg-asr

Indicates that total number of ASR messages received.

plmn-diamauth-msg-asa

Indicates that total number of ASA messages transmitted.

plmn-diamauth-msg-str

Indicates that total number of STR messages transmitted.

plmn-totgtp-attempt

.Indicates total number of GTP attempts on S2b interface.

plmn-totgtp-success

Indicates that total number of successful GTP sessions on S2b interface.

plmn-totgtp-failure

IndiccateDisplays total number of failed GTP sessions

plmn-tun-recv-crebear

Indicates that total number of Create Bearer Request messages received.

plmn-tun-sent-crebearrespaccept

Indicates that total number of Create Bearer Response Accepted messages transmitted.

plmn-tun-recv-crebearDiscard

Indicates that total number of Create Bearer Request Discarded messages received.

plmn-tun-sent-crebearres

Indicates that total number of Create Bearer Response transmitted.

plmn-tun-sent-crebearrespdenied

Indicates that total number of Create Bearer Response Denied messages transmitted.

plmn-tun-sent-delsessreq

Indicates that total number of Delete session requests transmitted.

plmn-tun-recv-delsessrespaccept

Indicates that total number of Delete session response accepted messages received.

plmn-mcc

The PLMN MCC context configured at the PLMN level that is currently facilitating the SaMOG Service. This is a key variable.

plmn-mnc

The PLMN MNC context configured at the PLMN level that is currently facilitating the SaMOG service. This is a key variable.

plmn-mrme-access-mode-gtpv2-selected

Indicates that the Network access mode statistics for the selected gtpv2 interface.

plmn-mrme-eap-call-attempted

Indicates that the total number of MRME EAP Session Attempted.

plmn-mrme-eap-call-success

Indicates that the total number of successful MRME EAP sessions.

plmn-mrme-eap-call-failure

Indicates that the total number of failed MRME EAP sessions.

plmn-mrme-eap-call-current

Indicates that the total number of current MRME EAP sessions.

plmn-cgw-sessstat-pdns-gtpv2-active

Indicates that the total number of session statistics active for PDN gtpv2 interface.

plmn-dhcp-curservsess

Indicates that the total number of DHCP server sessions that are active.

plmn-sess-total-setup

Indicates that the total number of DHCP Sessions setup.

plmn-total-released

Indicates that the total number of DHCP sessions released.

plmn-dhcp-msg-discover-rx

Indicates that the total number of DHCP discover messages received.

plmn-dhcp-msg-offer-tx

Indicates that the total number of DHCP offer messages transmitted.

plmn-dhcp-msg-request-rx

Indicates that the total number of DHCP request messages received.

plmn-dhcp-msg-ack-tx

Indicates that the total number of DHCP acknowledgment messages transmitted.

plmn-dhcp-msg-nak-tx

Indicates that the total number of transmitted DHCP messages that are not acknowledged.

plmn-cgw-sessstat-ipv6-router-advt-sent

Indicates that the total number of router advertisement messages sent.

plmn-tun-sent-cresess

Indicates the total number of Create Sessions Request Initially transmitted.

plmn-tun-recv-cresessrespaccept

Indicates that the total number of Create Session Response Accepted messages received.

plmn-tun-recv-crebear

Indicates that the total number of Create Bearer Requests Initial messages received.

plmn-tun-sent-crebearrespaccept

Indicates that the total number of Create Bearer Response Accepted messages transmitted.

plmn-tun-sent-delsessreq

Indicates that the total number of Delete Session Request Initial messages transmitted.

plmn-tun-recv-delsessrespaccept

Indicates that the total number of Delete Session Response Accepted messages received.

plmn-tun-recv-delbearreq

Indicates that the total number of Delete Bearer Request Initial messages received.

plmn-tun-sent-delbearrespaccept

Indicates that the total number of Delete Bearer Response Accepted messages transmitted.

plmn-der-req-id-sent

Indicates the total number of DE Requests.

plmn-dea-chal-rcvd

Indicates that the total number of DEA Challenge statistics received.

plmn-dea-acpt-rcvd

Indicates that the total number of DEA Accept statistics received.

plmn-diamauth-msg-asr

Indicates that the total number of Diameter authentication messages are received for ASR.

plmn-diamauth-msg-asa

Indicates the total number of Diameter authentication messages received for ASA.

plmn-diamauth-msg-rar

Indicates the total number of Diameter authentication messages received for RAR.

plmn-diamauth-msg-raa

Indicates that the total number of Diameter authentication messages for RAA.

plmn-diamauth-msg-str

Indicates that the total number of Diameter authentication messages are received for STR.

plmn-diamauth-msg-sta

Indicates that the total number of Diameter authentication messages are received for STA.

plmn-acc-req-sent

Indicates that the total number of PLMN accounting requests sent.

plmn-acc-rsp-rcvd

Indicates that the total number of PLMN accounting responses are received.

plmn-acc-start-sent

Indicates that the total number of PLMN accounting start messages are sent.

plmn-acc-stop-sent

Indicates that the total number of PLMN accounting stop messages sent.

plmn-acc-req-timeout

Indicates that the total number of PLMN accounting requests timed out.

Counters

Description

csfb-mt-voice-sgs-paging-request

This counter records all non-retransmitted SGS Paging Requests rx'd from MSC (i.e. The starting point of all the MT CSFB Voice procedures both Idle and Active modes).

csfb-mt-voice-failure-paging-timeout

This counter records max re-transmission timeout failure when eNB/UE do not respond to MME paging request (Idle mode error).

csfb-mt-voice-failure-miscellaneous

This counter records miscellaneous internal errors such as software errors, internal non-delivery errors, internal aborts, message validation errors, collision with start of MO Voice CSFB procedure etc (i.e. Errors not directly linked to the 3GPP spec procedures).

csfb-mt-voice-failure-ext-srv-req-reject

This counter records the failure when the cause code in the Extended Service Request is NOT CSFB Accept (Idle and Active modes).

csfb-mt-voice-failure-init-ctxt-setup

This counter records any Initial Context Setup Response failures encountered during the Idle mode scenario.

csfb-mt-voice-failure-cs-notification

This counter records non-delivery/max-retransmission timeout of the CS NOTIFICATION to the UE (Active mode scenario).

csfb-mt-voice-failure-ue-ctxt-mod

This counter records any UE Context Modification failures (either timeout or failure response - Active mode).

csfb-mt-voice-failure-sgs-service-abort-req

This counter records any procedure aborts based on the MT Voice Cancelled flag which is set when rx'ing the SGS service Abort Request from the MSC/VLR.

csfb-mt-voice-failure-ue-ctxt-rel-misc

This counter records any other S1 UE Context Release error or cause code that doesn't equal "cs-fallback-triggered = 23" but not the other cause codes stated above (Active mode no HO).

csfb-mt-voice-success-ue-ctxt-rel

This counter records the final success when a S1 UE Context Release response has cause-code "cs-fallback-triggered=23" (Active mode no HO). Successful end-point of the MT CSFB Voice with no HO.

dpca-imsa-total-session-priority-channel

Shows the cumulative number of Wireless Priority subscribers.

dpca-imsa-total-sessions- switched-from-priority-channel

Shows the cumulative number of subscribers moved from Wireless Priority to Normal.

dpca-imsa-total-sessions- switched-to-priority-channel

Shows the cumulative number of subscribers moved from Normal to Wireless Priority.

sessstat-pdn-wps-cumulative-activated

Shows the total number of P-GW PDNs that are either setup as an WPS PDN or upgrades to an WPS PDN.

sessstat-pdn-wps-cumulative-deactivated

The total number of P-GW PDNs that were either released or degrades to a non-WPS PDN.

tun-recv-cresessreq-wps

Shows the total number of tunnel create session request messages received by the system for WPS subscriber on the S5/S8 interface.

tun-sent-cresessresp-wps

Shows the total number of tunnel create session response messages sent by the system for WPS subscriber on the S5/S8 interface.

tun-recv-modbearerreq-wps

Shows the total number of tunnel modify bearer request messages received by the system for WPS subscriber on the S5/S8 interface.

tun-sent-modbearerresp-wps

Shows the total number of tunnel modify bearer response messages sent by the system for WPS subscriber on the S5/S8 interface.

tun-sent-crebearerreq-wps

Shows the total number of tunnel create bearer request messages sent by the system for WPS subscriber on the S5/S8 interface.

tun-recv-crebearerresp-wps

Shows the total number of tunnel create bearer response messages received by the system for WPS subscriber on the S5/S8 interface

tun-sent-updbearerreq-wps

Shows the total number of tunnel update bearer request messages sent by the system for WPS subscriber on the S5/S8 interface.

tun-recv-updbearerresp-wps

Shows the total number of tunnel update bearer response messages received by the system for WPS subscriber on the S5/S8 interface.

pgw-anchor-pdns-wps- cumulative-activated

Shows the total number of P-GW anchored PDNs that are either setup as an WPS PDN or upgrades to an WPS PDN.

pgw-anchor-pdns-wps- cumulative-deactivated

Shows the total number of P-GW anchored PDNs that were either released or degrades to a non-WPS PDNs.

saegw-colocated-pdns-wps- cumulative-activated

Shows the total number of SAE-GW collapsed PDNs that are either setup as an WPS PDN or upgrades to an WPS PDN.

saegw-colocated-pdns-wps- cumulative-deactivated

Shows the total number of SAE-GW collapsed PDNs that were either released or degrades to a non-WPS PDN.

sgw-anchor-pdns-wps- cumulative-activated

Shows the total number of S-GW anchored PDNs that are either setup as an WPS PDN or upgrades to an WPS PDN.

sgw-anchor-pdns-wps- cumulative-deactivated

Shows the total number of S-GW anchored PDNs that were either released or degrades to a non-WPS PDN.

sessstat-pdn-wps-cumulative-activated

Shows the total number of S-GW PDNs that are either setup as an WPS PDN or upgrades to an WPS PDN.

sessstat-pdn-wps-cumulative-deactivated

The total number of S-GW PDNs that were either released or degrades to a non-WPS PDN.