Feature Defaults Quick Reference

Feature Defaults

The following table indicates what features are enabled or disabled by default.

Feature

Default

APN, QCI, and ARP-based DSCP Mapping for WPS Sessions

Disabled - Configuration Required

Capability to Record and Produce Call Transactions on ePDG

Disabled - Configuration Required

Cisco Ultra Traffic Optimization Bulk Statistics Enhancements

Disabled - Configuration Required

Closed Subscriber Groups Mobility Event Support on P-GW and GGSN

Disabled - Configuration Required

Crowd Sourcing Optimization

Disabled - Configuration Required

Customizing Last User Location Information

Disabled - Configuration Required

Customizing TAC Field in CDR

Disabled - Configuration Required

Enhanced Event Logging

Enabled - Always-on

Diameter Route Table Entries Display Limit and Filtration Enhancement

Not Applicable

Dynamic Enabling of UBR Buffering in MME Services

Disabled - Configuration Required

Extraction of IPv4 Addresses Embedded in IPv6 Addresses

Disabled - License Required

Failure Counters for CSFB MT Counters

Enabled - Always-on

Gy Interface Spec Compliance 2019

Disabled - Configuration Required

IMS PCO Configurations when Gx is Down

Disabled - Configuration Required

Increasing Maximum Chunks Per User NAPT for 5G MiFi

Disabled - Configuration Required

Inter-MME Handover for Modify Bearer Requests without S11-U TEID

Disabled - Configuration Required

MME Masked IMEISV

Disabled - Configuration Required

MME Bearer Request Message Enhancements During Handover Process

Disabled - Configuration Required

Mobile Hot Spot Usage on RADIUS Accounting

Disabled - Configuration Required

4G Network Upgrade Gx Interface

Disabled - Configuration Required

Password Expiration Notification

Enabled - Always-on

P-GW Buffering Mechanism

Enabled - Configuration Required

P-GW Buffering Optimization

Enabled - Always-on

PLMN Level Statistics for ePDG Services

Disabled - Configuration Required

PLMN Level Statistics for SaMOG Services

Disabled - Configuration Required

Separation of 2G 3G 4G and WLAN Bulkstatistics

Disabled - Configuration Required

Sessmgr Restart While Processing Secondary RAT Usage CDR Records

Enabled - Configuration Required

Secondary RAT Usage Report in CDR Records

Disabled - Configuration Required

Suppressing Handover Request for VoWiFi IR Subscribers

Disabled - Configuration Required

Support to Add Two Additional Attributes in EDR

Enabled - Always-on

Timeout Exclusion from CSFB Counters

Enabled - Always-on