configure
   bulkstats mode
      schema name format format_string
      sample-interval time_interval
      transfer-interval xmit_time_interval
      limit mem_limit
      exit
    bulkstats collection
    end

configure
  bulkstats mode
    file number
      receiver ip_address { primary | secondary } 
       [ mechanism { { { ftp | sftp } login user_name 
       [ encrypted ] password pwd } | tftp } } ] }
      receiver mode { redundant | secondary-on-failure }
      remotefile format naming_convention [ both-receivers | primary-receiver | secondary-receiver ]
      header format header_format
      footer format footer_format
      exit
    schema_type schema format format_string
    sample-interval time_interval
    transfer-interval xmit_time_interval
    limit mem_limit
    exit
  bulkstats collection
  end

configure
  bulkstats mode
    schema_type schema format format_string

configure

   [no] bulkstats config [ schema | supplement ] url

   end

show bulkstats schemas

Bulk Statistics Server Configuration:
    Server State:                            Enabled 
    File Limit:                              6000 KB 
    Sample Interval:                         15 minutes (0D 0H 15M)
    Transfer Interval:                       480 minutes (0D 0H 15M)
    Collection Mode:                         Cumulative 
    Receiver Mode:                           Secondary-on-failure 
    Local File Storage:                      None
Bulk Statistics Server Statistics:
    Records awaiting transmission:  114
    Bytes awaiting transmission:    8092
    Total records collected:        59926
    Total bytes collected:          4190178 
    Total records transmitted:      59812
    Total bytes transmitted:        4188512 
    Total records discarded:        0
    Total bytes discarded:          0
    Last collection time required:  2 second(s)
    Last transfer time required:    0 second(s)
    Last successful transfer:       Wednesday December 7 12:14:30 EDT 2011
    Last successful tx recs:        190
    Last successful tx bytes:       13507
    Last attempted transfer:        Wednesday December 7 12:14:30 EDT 2011
File 1
    Remote File Format:     /users/ems/server/data/chicago/bulkstat%date%%time%.txt
    File Header:            "CHI_test %time%"
    File Footer:            ""
Bulkstats Receivers:
    Primary: 192.168.0.100 using FTP with username administrator
    Records awaiting transmission:    0
    Bytes awaiting transmission:      0
    Total records collected:          0
    Total bytes collected:            0 
    Total records transmitted:        0 
    Total bytes transmitted:          0 
    Total records discarded:          0 
    Total bytes discarded:            0 
    Last transfer time required:      0 second(s) 
    No successful data transfers
    No attempted data transfe

File 2 not configured

File 3 not configured

File 4 not configured

• Counter: A counter records incremental data cumulatively and rolls over when the counter limit is reached.

  • All counter statistics are cumulative and reset only by one of the following methods: roll-over when the limit is reached, after a system restart, or after a clear command is performed.

  • The limit depends upon the data type.

• Gauge: A gauge statistic indicates a single value; a snapshot representation of a single point in time within a defined time frame. The gauge changes to a new value with each snapshot though a value may repeat from one period to the next. The limit depends upon the data type.

• Information: This type of statistic provides information, often intended to differentiate sets of statistics; for example, a VPN name or IP address. The type of information provided depends upon the data type.

• Incremental: An incremental data type records incremental data cumulatively and rolls over when the counter limit is reached.

  • All incremental statistics are cumulative and reset only by one of the following methods: roll-over when the limit is reached, after a system restart, or after a clear command is performed.

  • The limit depends upon the data type.

• Gauge: A gauge statistic indicates a single value; a snapshot representation of a single point in time within a defined time frame. The gauge changes to a new value with each snapshot though a value may repeat from one period to the next. The limit depends upon the data type.

• Primary-key: This type of statistic provides information, often intended to differentiate sets of statistics; for example, a VPN name or IP address. The type of information provided depends upon the data type.

• Int32: A 32-bit integer; the roll-over to zero limit is 4,294,967,295.

• Int64: A 64-bit integer; the roll-over to zero limit is 18,446,744,073,709,551,615.

• Float: A numeric value that includes decimal points; for example, 1.345.

• String: A series of ASCII alphanumeric characters in a single grouping, usually pre-configured.