T1/E1 & T3/E3
Digital WAN carrier facility. T1 transmits DS-1-formatted data at 1.544 Mbps through the telephone-switching network, using AMI or B8ZS coding. Compare with E1. See also AMI, B8ZS, and DS-1.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback-
Top Search Results
Key Information
Customers Also Viewed
Saved Content
-
You can now save documents for easier access and future use. Saved documents for this product will be listed here, or visit the My Saved Content page to view and manage all saved content from across Cisco.com.
Log in to see your Saved Content.
-
Technology Information
- Line Coding Info
Technology Q&A
-
Design
-
Configuration
- Configure SM-X-1T3/E3 on Cisco ISR 4000 Platform
- Configuring an AS5350/AS5400 for Incoming Async and ISDN Calls
- Configuring and Troubleshooting E1 R2 Signaling for Data Calls
- Master and Slave Relationships on a T1 Back-to-Back Connection
- Configuring a T1 or E1 Interface for Outgoing Analog Calls Using the modem dialout controller Command
- Sample Configuration - Inverse MUX Application using Multilink PPP
- Configuring NFAS with Four T1s
- Configuring Dialin and Dialout on the Same T1/E1 PRI Circuits
- Configuring a Cisco 3600 Router with T1/E1 and Digital Modem Network Modules
Configuration Examples and TechNotes
-
Operation and Troubleshooting
- T1 Layer 1 Troubleshooting Flowchart
- Hard Plug Loopback Test
- Blue and Yellow T1 Alarm Troubleshooting
- T1 Layer 1 Troubleshooting
- T1 Alarm Troubleshooting
- E1 Alarm Troubleshooting
- E3 Alarm Troubleshooting
- Loopback Tests for T1/56K Lines
- E1 Error Event Troubleshooting Flowchart
- Hard Plug Loopback Tests for E1 Lines
- Overview of General Modem and NAS Line Quality
- E1 Layer 1 Troubleshooting
- E1 PRI Troubleshooting Flowchart
- T1 Troubleshooting
- E1 Error Events Troubleshooting
Troubleshooting TechNotes
-
