前提条件
-
サービス ノード データ ネットワーク IP 接続の EPG / L3out を事前に設定する必要があります。
-
Cisco ACI インバンド EPG からのネットワーク IP 接続を事前に設定する必要があります。
-
サービス ノードからデータ ネットワーク上のリーフおよびスパインへの IP 接続を設定する必要があります(これは Cisco NIR および Cisco NIA にのみ適用されます)。
-
推奨されるデータ ネットワーク接続オプション: Cisco Application Services Engine は、最初の 2 つのファブリック ポートでアクティブ/バックアップ ボンディングを使用します。信頼性のために両方のリンクを接続します。これらのポートは、Cisco ACI ファブリックリーフノードに直接接続することも、外部のレイヤ 2 またはレイヤ 3 ネットワークに接続することもできます。
直接接続:
Cisco ACI ファブリックで Cisco Application Services Engine 接続ポートの EPG を設定し、Cisco Application Services Engine EPG とファブリック インバンド ネットワーク EPG 間のコントラクトを作成します。
レイヤ 2 またはレイヤ 3 ネットワークを使用して接続済み:
L2Out または L3out を設定し、Cisco APIC インバンド ネットワーク EPG へのコントラクトを作成します。