この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章は、次の内容で構成されています。
設定を確認するには、次のいずれかのコマンドを使用します。
コマンド出力の詳細については、『Cisco Nexus 1000V Command Reference』を参照してください。
switch# show port-profile port-profile UpLinkProfile1 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on mac-pinning evaluated config attributes: channel-group auto mode on mac-pinning assigned interfaces: port-profile UpLinkProfile2 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on sub-group cdp evaluated config attributes: channel-group auto mode on sub-group cdp assigned interfaces: port-profile UpLinkProfile3 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on sub-group manual evaluated config attributes: channel-group auto mode on sub-group manual assigned interfaces: switch#
switch# show port-profile name UpLinkProfile3 port-profile UpLinkProfile3 description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: none port-group: max ports: 32 inherit: config attributes: channel-group auto mode on sub-group manual evaluated config attributes: channel-group auto mode on sub-group manual assigned interfaces: switch#
switch# show port-profile brief -------------------------------------------------------------------------------- Port Profile Remote Conf Eval Child Child Profile State Mgmt Items Items Intfs Profs -------------------------------------------------------------------------------- UplinkProfile1 enabled vmware 3 3 1 0 UplinkProfile2 enabled vmware 3 3 2 0 Ubuntu-Profile enabled vmware 3 3 1 0 switch#
switch# show port-profile virtual usage ------------------------------------------------------------------------------- Port Profile Port Adapter Owner ------------------------------------------------------------------------------- n1kv-uplink0 Po1 Eth3/2 vmnic1 localhost. Eth3/3 vmnic2 localhost. vlan1767 Veth7 Net Adapter 1 all-tool-7 Veth8 Net Adapter 1 all-tool-8 aipc1765 Veth4 Net Adapter 1 bl-h-s inband1766 Veth6 Net Adapter 3 bl-h-s mgmt1764 Veth5 Net Adapter 2 bl-h-s vpc-mac-uplink Po7 Eth5/2 vmnic1 localhost. Eth5/3 vmnic2 localhost. ch-vpc-mac-uplink Po2 Po3 Eth4/2 vmnic1 VDANIKLNCOS Eth4/3 vmnic2 VDANIKLNCOS ch-aipc1765 Veth1 Net Adapter 1 bl-h-p ch-mgmt1764 Veth2 Net Adapter 2 bl-h-p ch-inband1766 Veth3 Net Adapter 3 bl-h-p switch#
switch# show port-profile expand-interface name UplinkProfile1 port-profile UplinkProfile1 Ethernet2/2 switchport mode trunk switchport trunk allowed vlan 110-119 no shutdown switch#
switch# show port-profile expand-interface port-profile UplinkProfile1 Ethernet2/2 switchport mode trunk switchport trunk allowed vlan 110-119 no shutdown port-profile UplinkProfile2 Ethernet2/3 switchport mode trunk switchport trunk allowed vlan 117 no shutdown Ethernet2/4 switchport mode trunk switchport trunk allowed vlan 117 no shutdown port-profile Ubuntu-Profile Vethernet439 switchport mode access switchport access vlan 118 no shutdown switch#
switch# show port-profile sync-status interface ethernet 3/2 Ethernet3/2 port-profile: uplink interface status: quarantine sync status: out of sync cached commands: errors: command cache overrun recovery steps: bring interface online switch#
switch# show running-config port-profile port-profile type ethernet UplinkProfile1 description "Profile for critical system ports" vmware port-group switchport mode access switchport access vlan 113 switchport trunk native vlan 113 channel-group auto mode on no shutdown port-profile type vethernet UplinkProfile2 vmware port-group vmware max-ports 5 switchport mode trunk switchport trunk native vlan 112 channel-group auto mode on sub-group cdp no shutdown switch#
switch# show port-profile-role name adminUser Name: adminUser Description: adminOnly Users: hdbaar (user) Assigned port-profiles: allaccess2 switch#
switch# show port-profile-role users Groups: Administrators TestGroupB Users: dbaar fgreen suchen mariofr switch#
機能名 | リリース | 機能情報 |
---|---|---|
show port-profile-role users |
4.2(1)SV1(4) |
このコマンドの出力は、使用可能なユーザおよびグループを示します。 |
show port-profile-role |
4.2(1)SV1(4) |
このコマンドの出力は、ポート プロファイル ロールの設定を示します。 |
show running-config port-profile |
4.0(4)SV1(2) |
このコマンドの出力は、ポート プロファイルの設定を示します。 |
show running-config |
4.0(4)SV1(2) |
このコマンドの出力は、次のように変更されました。 |
show port-profile name |
4.0(4)SV1(2) |
このコマンドの出力は、ポート プロファイル タイプ、ピン接続、およびチャネルグループ設定を示すようになりました。 アップリンクとして使用されるポート プロファイルはイーサネット タイプとして設定されるようになったため、アップリンク機能はこのコマンドの出力から削除されました。 |
ポート プロファイルの確認 |
4.0(4)SV1(1) |
この機能が導入されました。 |