この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章は、次の内容で構成されています。
システム ポート プロファイルは、VEM が VSM と通信する前に設定されている必要がある、これらのポートと VLAN の確立および保護が目的です。
この理由から、次のポートでシステム VLAN を使用する必要があります。
システム ポート プロファイルとシステム VLAN の詳細については、『Cisco Nexus 1000V Installation and Upgrade Guide』を参照してください。
ポート プロファイルで使用されるデフォルト設定の概要については、デフォルト設定を参照してください。
システム ポート プロファイルはイーサネット タイプであることが必要です。これは、物理ポートに使用されるからです。 この手順では、イーサネット タイプを設定します。
次に、システム ポート プロファイルを作成する例を示します。
switch# configure terminal switch(config)# port-profile AccessProf switch(config-port-prof)# description “System profile for critical ports” switch(config-port-prof)# system vlan 1 switch(config-port-prof)# show port-profile name AccessProf port-profile AccessProf description: type: vethernet status: disabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: 1 port-group: max ports: 32 inherit: port-profile xyz config attributes: switchport mode access switchport access vlan 1 switchport trunk allowed vlan 1-10 channel-group auto mode on sub-group cdp no shutdown evaluated config attributes: switchport mode access switchport access vlan 1 switchport trunk allowed vlan 1-10 mtu 1500 channel-group auto mode on sub-group cdp no shutdown assigned interfaces: switch(config-port-prof)#
ステップ 1 | vCenter Server で、ポートを DVS から削除します。 |
ステップ 2 | 別の、または変更されたポート プロファイルを指定してポートを vCenter Server に追加します。 |
下記の手順を使用すると、トランク モードのポート プロファイルのシステム VLAN のセットの変更を、すべてのシステム VLAN を削除せずに行うことができます。
ステップ 1 | このプロファイルを伝送する各 VEM のアップストリーム スイッチから、制御 VLAN を伝送するスイッチ ポートを停止します。 |
ステップ 2 |
ポート プロファイルを、システム VLAN のあるアクセス プロファイルに変換します。 ポート プロファイルからシステム VLAN のあるアクセス プロファイルへの変換を参照してください。 |
ステップ 3 |
アクセス ポート プロファイルを再びトランク プロファイルに変換します。 アクセス ポート プロファイルからトランク ポート プロファイルへの変換を参照してください。 |
ステップ 4 |
このプロファイルを伝送する各 VEM のアップストリーム スイッチから、制御 VLAN を伝送するスイッチ ポートの停止を解除します。 VEM が VSM に再接続します。 |
この手順を使用すると、トランク モードのポート プロファイルのシステム VLAN のセットの変更を、すべてのシステム VLAN を削除せずに行うことができます。
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | switch# configure terminal | グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 | switch(config)# port-profile [type {ethernet | vethernet}] name | 名前付きポート プロファイルのポート プロファイル コンフィギュレーション モードを開始します。 ポート プロファイルがない場合は、次の特性を使用して作成されます。
|
||
ステップ 3 | switch(config-port-prof)# no system vlan | ポート プロファイルからシステム VLAN を削除します。 |
||
ステップ 4 | switch(config-port-prof)# switchport mode access | ポート モード アクセスを設定します。 |
||
ステップ 5 | switch(config-port-prof)# switchport access vlan vlan-id | インターフェイスのアクセス モードを設定します。 |
||
ステップ 6 | switch(config-port-prof)# no shutdown | システム VLAN を設定できるようにポートを管理ステータスに変更します。
|
||
ステップ 7 | switch(config-port-prof)# system vlan vlan-id-list | このポート プロファイルにシステム VLAN を追加します。 |
トランク ポート プロファイルは、システム VLAN のあるアクセス ポート プロファイルに変換されます。
次の例では、トランク ポート プロファイルをアクセス ポート プロファイルに変換する方法を示します。
switch# configure terminal switch(config)# port-profile Trunk_System_Prof switch(config-port-prof)# no system vlan switch(config-port-prof)# switchport mode access switch(config-port-prof)# switchport access vlan 1 switch(config-port-prof)# system vlan 300 switch(config-port-prof)#
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | switch# configure terminal | グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 | switch(config)# port-profile [type {ethernet | vethernet}] name | 名前付きポート プロファイルのポート プロファイル コンフィギュレーション モードを開始します。 ポート プロファイルがない場合は、次の特性を使用して作成されます。
|
||
ステップ 3 | switch(config-port-prof)# switchport mode trunk | インターフェイスがトランキング ポートとして使用されるものであることを指定します。 トランク ポートは、ネイティブ VLAN に対しては非タグ付きパケットを伝送し、他のすべての VLAN に対してはカプセル化されたタグ付きパケットを伝送します。 |
||
ステップ 4 | system vlan vlan-id-list |
このポート プロファイルにシステム VLAN を追加します。 |
||
ステップ 5 | switch(config-port-prof)# show port-profile [brief | expand-interface | usage] [name profile-name] | (任意) 確認のためにコンフィギュレーションを表示します。 |
||
ステップ 6 | switch(config-port-prof)# copy running-config startup-config | (任意) リブートおよびリスタート時に実行コンフィギュレーションをスタートアップ コンフィギュレーションにコピーして、変更を永続的に保存します。 |
次の例では、アクセス ポート プロファイルをトランク ポート プロファイルに変換する方法を示します。
switch# config terminal switch(config)# port-profile Trunk_System_Prof switch(config-port-prof)# switchport mode trunk switch(config-port-prof)# system vlan 114,115 switch(config-port-prof)# show port-profile name Trunk_System_Prof port-profile Trunk_System_Prof description: type: vethernet status: enabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: 114,115 port-group: max ports: 32 inherit: config attributes: switchport mode trunk switchport trunk allowed vlan all no shutdown evaluated config attributes: switchport mode trunk switchport trunk allowed vlan all mtu 1500 no shutdown assigned interfaces: switch(config-port-prof)# copy running-config startup-config
この手順を使用すると、アクセス ポート プロファイルのシステム VLAN のセットの変更を、すべてのシステム VLAN を削除せずに行うことができます。
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | switch# configure terminal | グローバル コンフィギュレーション モードを開始します。 |
||
ステップ 2 | switch(config)# port-profile [type {ethernet | vethernet}] name | 名前付きポート プロファイルのポート プロファイル コンフィギュレーション モードを開始します。 ポート プロファイルがない場合は、次の特性を使用して作成されます。
|
||
ステップ 3 | switch(config-port-prof)# system vlan vlan-id-list | このポート プロファイルにシステム VLAN を追加します。 |
||
ステップ 4 | switch(config-port-prof)# show port-profile [brief | expand-interface | usage] [name profile-name] | (任意) 確認のためにコンフィギュレーションを表示します。 |
||
ステップ 5 | switch(config-port-prof)# copy running-config startup-config | (任意) リブートおよびリスタート時に実行コンフィギュレーションをスタートアップ コンフィギュレーションにコピーして、変更を永続的に保存します。 |
次の例では、アクセス ポート プロファイルのシステム VLAN のセットの変更を、すべてのシステム VLAN を削除せずに行う方法を示します。
switch# configure terminal switch(config)# port-profile Access_System_Prof switch(config-port-prof)# system vlan 114,115 switch(config-port-prof)# show port-profile name Access_System_prof port-profile Access_System_Prof description: type: vethernet status: enabled capability l3control: no pinning control-vlan: - pinning packet-vlan: - system vlans: 114,115 port-group: max ports: 32 inherit: config attributes: switchport mode access switchport trunk allowed vlan all no shutdown evaluated config attributes: switchport mode access switchport trunk allowed vlan all mtu 1500 no shutdown assigned interfaces: switch(config-port-prof)# copy running-config startup-config
このプロファイルを伝送する各 VEM のアップストリーム スイッチから、制御 VLAN を伝送するスイッチ ポートの停止を解除します。
機能名 |
リリース |
機能情報 |
---|---|---|
MTU |
4.2(1)SV1(4) |
system mtu コマンドは削除され、mtu コマンドで置き換えられました。 |
system mtu |
4.0(4)SV1(3) |
system mtu コマンドを使用すると、Cisco Nexus 1000V に接続された PNIC のデフォルト以外の MTU 設定を ESX サーバのリブート後も維持することができます。 |
システム ポート プロファイル |
4.0(4)SV1(1) |
この機能が導入されました。 |