GUI を使用した IP ベースの EPG 構成の確認
この手順では、GUI および Visore ツールを使用して IP ベースの EPG が正しく構成されていることを確認する方法について説明します。
手順
ステップ 1 |
作成した IP ベースの EPG が GUI の uSeg EPGs フォルダーの下に表示されていることを確認します(次のスクリーン キャプチャを参照)。 |
||
ステップ 2 |
各 EPG IP(IP ベースの EPG)の EPG - IP プロパティ画面(右側のウィンドウ ペイン)で情報が正しいことを確認します。 |
||
ステップ 3 |
Web ブラウザから、APIC の IP アドレスに続けて「/visore.html」を入力します。Visore は、EPG など、システム内のすべてのオブジェクトを表示できるツールです。Visore を使用して、IP ベースの EPG が正しく構成されていることを確認できます。Visore の詳細については、『アプリケーション ポリシー インフラストラクチャ コントローラ Visore ツールの紹介』を参照してください。 |
||
ステップ 4 |
ユーザー名とパスワードを入力し、[ログイン(Login)] をクリックします。 |
||
ステップ 5 |
クラスまたは DN の隣のフィールド(たとえば、「fvAEPg」)にクラスの名前を入力して、GUI で確認した IP ベースの EPG のクエリを実行します。
|
||
ステップ 6 |
スイッチ側から見た図です。スイッチで、fvEpP クラスのクエリを実行して EPG を表示し、「crtrnEnabled」属性を確認できます。IP ベースの EPG の場合は「yes」に設定されます。 |
||
ステップ 7 |
構成したすべてのエンドポイントと IP アドレスの pcTag が一致することを確認します。すべての EPG には pcTag があります。構成した IP アドレスと一致するすべてのエンドポイントは、この pcTag に分類されます。すべてのエンドポイントには、クラス クエリを実行できる IP アドレスがあります。トラブルシューティングを行うときは、これらのエンドポイント(サーバー)がこの IP ベースの EPG に正しく分類されているかどうかを確認する必要があります。(pcTags は IP ベースの EPG に一致する必要があります。) |