クラスタのトラブルシューティング シナリオ
問題 | ソリューション | ||
---|---|---|---|
APIC ノードはクラスタ内でエラーが発生します。たとえば、5 つの APIC のクラスタのノード 2 がエラーを起こすとします。 |
2 つの解決策があります。
|
||
新しい APIC はファブリックに接続し、リーフ スイッチへの接続は失われます。 |
インフラ(インフラストラクチャ)VLAN の不一致があるかを確認するには、次のコマンドを使用します。
これらのコマンドの出力が異なる VLAN を表示する場合、新しい APIC は正しいインフラ(インフラストラクチャ)VLAN で設定されていません。この問題を解決するには、次の手順に従います。
|
||
2 つの APIC は、再起動後に通信できません。 |
この問題は次の一連のイベントの後に発生することがあります。
このシナリオでは、APIC1a が APIC2 を検出しますが、APIC2 はオフラインと見なされる APIC1 があるクラスタ内に存在するので使用できません。その結果、APIC1a は APIC2 からのメッセージを受け入れません。 この問題を解決するには、APIC2 上の APIC1 をデコミッションし、再度 APIC1 を稼働させます。 |
||
デコミッションされた APIC がクラスタに参加します。 |
この問題は次の一連のイベントの後に発生することがあります。
この問題を解決するには、クラスタの回復後に APIC をデコミッションします。 |
||
再起動後の ChassisID が一致しません。 | この問題は、APIC がクラスタで登録されたシャーシ ID と異なるシャーシ ID で起動したときに起こります。その結果、この APIC からのメッセージが廃棄されます。
この問題を解決するには、リブートの前に APIC が解放されていることを確認してください。 |
||
APIC はクラスタ サイズの変更時のエラーを表示します。 |
さまざまな条件が、AdminstrativeClusterSize に合わせたクラスタによる OperationalClusterSize の拡張の妨げになる可能性があります。詳細については、障害を調べて、Cisco APIC ベーシック コンフィギュレーション ガイド の「クラスタ障害」セクションを確認してください。 |
||
APIC がクラスタに参加できない |
この問題は、クラスタを拡大するときに 2 つの APIC が同じクラスタ ID で設定されると起こります。その結果、2 つのうち 1 つの APIC がクラスタに参加できず、拡張競合シャーシ ID 不一致のエラーが表示されます。 この問題を解決するには、新しいクラスタ ID でクラスタの外側に APIC を設定します。 |
||
APIC がクラスタで到達不能です。 |
この問題を診断するには、次の設定を確認してください。
|
||
クラスタは拡張しません。 |
この問題は、次の状況で発生します。
|
||
APIC がダウンしています。 |
|