ユーザ インターフェイス言語の設定
MCU でサポートする言語を設定できます。 表 3-1 に、MCU でサポートされる言語の一覧を示します。
(注) 管理インターフェイスで中国語または日本語のフォントを表示するには、Web ブラウザを実行しているコンピュータがその言語をサポートしている必要があります。Microsoft Windows オペレーティング システムでは、[Control Panel] > [Regional and Language] オプションでデフォルトの言語を設定できます。
表 3-1 MCU インターフェイスでサポートされる言語
言語 |
管理インターフェイス |
会議制御インターフェイス |
会議ビデオのテキスト オーバーレイ |
英語 |
* |
* |
* |
中国語(簡体字) |
* |
* |
* |
日本語 |
* |
* |
* |
ポルトガル語 |
* |
* |
|
スペイン語 |
* |
* |
|
ロシア語 |
* |
* |
|
手順
ステップ 1 MCU ユーザ インターフェイスで [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Basics] セクションを見つけます。
ステップ 4 [Default user interface language] フィールドで言語を選択します。
ステップ 5 [Apply] をクリックします。
(注) [Configuration] > [Customization] でテキスト オーバーレイを設定します。詳細については、「テキスト オーバーレイの言語の設定」を参照してください。
Cisco Unified Videoconferencing 5100 MCU ID の設定
MCU ID を設定できます。この ID は、次の状況で MCU を識別します。
• ゲートキーパー/SIP の登録中
• エンドポイントを会議に招待するとき
• カスケード会議でカスケードされた MCU にテキスト オーバーレイを使用するとき
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Basics] セクションを見つけます。
ステップ 4 [MCU Identifier] フィールドに ID を入力します(最大 32 文字)。例:「London office」。
ステップ 5 [Apply] をクリックします。
Cisco Unified Videoconferencing 5100 MCU の日時の設定
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] をクリックします。
ステップ 3 [Basics] セクションを見つけます。
ステップ 4 (オプション)[Date and time] セクションで [Set manually] を選択します。
ステップ 5 [Get local time] をクリックするか、またはカレンダー アイコンをクリックして目的の時間を設定します。
ステップ 6 (オプション)[Set NTP server] を選択し、時刻をネットワーク サーバの時計と同期させます。
ステップ 7 目的の NTP サーバの IP アドレスを入力します。
ステップ 8 時間帯を選択します。
ステップ 9 [Apply] をクリックします。
アドレス設定の変更
MCU の IP アドレス情報、DNS 情報、イーサネット ポートの速度、二重設定を変更できます。
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Network] セクションを見つけます。
ステップ 4 IP アドレス設定を変更するには、次のいずれかの手順を実行します。
a. MCU に割り当てる IP アドレスを [IP address] フィールドに入力します。
b. MCU で使用するルータの IP アドレスを [Router IP] フィールドに入力します。
c. MCU で使用するサブネット マスクを [Subnet Mask] フィールドに入力します。
ステップ 5 DNS 情報を変更または追加するには、次の手順を実行します。
a. 現在の MCU に割り当てるエイリアスを [DNS suffix] フィールドに入力します。
b. MCU で使用するプライマリ DNS サーバの IP アドレスを [DNS server1] フィールドに入力します。
c. MCU で使用するバックアップ DNS サーバの IP アドレスを [DNS server2] フィールドに入力します。
ステップ 6 イーサネット ポートと二重化の速度値を選択し、[Port settings] フィールドに設定します。
(注) [Port settings] オプションを [Auto] に設定することを推奨します。
ステップ 7 [Apply] をクリックします。
Cisco Unified Videoconferencing 5100 MCU のセキュリティ設定
外部プログラムによる MCU に対するアクセスを設定できます。これらの外部プログラムには、Telnet、Simple Network Management Protocol(SNMP; 簡易ネットワーク管理プロトコル)、File Transfer Protocol(FTP; ファイル転送プロトコル)、Internet Control Message Protocol(ICMP; インターネット制御メッセージ プロトコル、「ping」)などがあります。
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Security] セクションを見つけます。
ステップ 4 MCU でサポートするアクセス レベルを [Security mode] フィールドで選択します。
• [Standard]:SNMP、Telnet、FTP、および ICMP による MCU へのアクセスを許可します。
• [High (no Telnet or FTP)]:SNMP と ICMP による MCU へのアクセスだけを許可します。
• [Maximum (no Telnet, FTP, SNMP, or ICMP)]:外部プログラムによる MCU へのアクセスを禁止します。
ステップ 5 [Apply] をクリックします。
Web サーバ証明書の作成およびインポート
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Security] セクションを見つけます。
ステップ 4 ウィザードで、[Manage ] を選択すると Web サーバ証明書を作成できます。[Import] を選択すると既存の証明書をインポートできます。または、[Export ] を選択して既存の証明書をファイルに保存できます。
ステップ 5 [Enable HTTPS] を選択します。
ステップ 6 [Apply] をクリックします。
SNMP トラップ サーバの管理方法
• 「SNMP トラップ サーバの表示」
• 「SNMP トラップ サーバの設定」
• 「SNMP トラップ サーバの変更」
• 「SNMP トラップ サーバの削除」
SNMP トラップ サーバの表示
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Trap servers] セクションに、MCU の SNMP トラップの送信先として設定済みの SNMP トラップ サーバがすべて表示されます。
SNMP トラップ サーバの設定
MCU の SNMP トラップの送信先として、複数の SNMP トラップ サーバの IP アドレスとポート番号を指定できます。
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Trap servers] セクションを見つけます。
ステップ 4 [Add new server...] を選択します。
ステップ 5 SNMP トラップ サーバの IP アドレスとポートを入力します。
SNMP サーバのデフォルトのポートは 162 です。
ステップ 6 [Apply] をクリックして設定を保存します。
SNMP トラップ サーバの変更
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Trap servers] セクションを見つけます。
ステップ 4 変更するサーバの [Review] カラムでボタンを選択します。
ステップ 5 必要な設定を変更します。
ステップ 6 [Apply] をクリックして設定を保存します。
SNMP トラップ サーバの削除
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [Trap servers] セクションを見つけます。
ステップ 4 削除するサーバの [Review] カラムでボタンを選択します。
ステップ 5 [Delete] をクリックします。
ステップ 6 [Yes] を選択して削除を確認します。
Quality of Service の設定と表示
設定済みのシステム設定を使用するか、またはユーザ固有の設定を作成して、ビデオ コールや音声コールに Quality of Service(QoS)のプライオリティ レベルを割り当てることができます。
QoS を設定する場合、MCU を設定してアウトバウンド パケットの IP ヘッダー内に、DiffServ Code Point(DSCP; DiffServ コード ポイント)値を追加します。QoS をサポートするネットワーク上のルータは、そのようなコード化パケットに帯域幅、遅延、ジッタの優先処理を指定し、パケット転送の効率を向上できます。MCU の QoS パラメータは、音声コール、ビデオコール、またはその両方に対して設定できます。
手順
ステップ 1 [Configuration] を選択します。
ステップ 2 [Setup] を選択します。
ステップ 3 [QoS] セクションを見つけます。
ステップ 4 [Enable QoS support] を選択します。
ステップ 5 次のいずれかのオプションを選択して、メディア タイプごとに必要な DSCP 値を設定します。
• [Auto attendant service]:各メディア タイプにデフォルトの DSCP 値が割り当てられます。このデフォルト設定は、Cisco の推奨値です。
• [Custom]:各メディア タイプにユーザ固有の DSCP 値が割り当てられます。
ステップ 6 (オプション。[Custom] を選択した場合にだけ)次の手順を実行します。
• [Video calls] セクションの [Voice priority] フィールドに 0 ~ 63 の整数を入力し、MCU が送信する音声パケットの DSCP 値を設定します。デフォルト値は 34 です。
• [Video calls] セクションの [Video priority] フィールドに 0 ~ 63 の整数を入力し、MCU が送信するビデオ パケットの DSCP 値を設定します。デフォルト値は 34 です。
• [Audio calls] セクションの [Voice priority] フィールドに 0 ~ 63 の整数を入力し、MCU が送信する音声パケットの DSCP 値を設定します。デフォルト値は 46 です。
ステップ 7 [Apply] をクリックします。