この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
Cisco IP Phone は、ハードウェアに組み込みの「Sunshine」をデフォルトの呼出音として出荷されます。 Cisco Unified Communications Manager には、一連の追加の電話呼出音もデフォルトで付属しており、これらはパルス符号変調(PCM)ファイルとしてソフトウェアに実装されています。 PCM ファイルは、サイトで使用できる呼出音リスト オプションを記述した XML ファイル(Ringlist-wb.xml)とともに、各 Cisco Unified Communications Manager サーバの TFTP ディレクトリに配置されています。
すべてのファイル名で大文字と小文字が区別されます。 ファイル名に ringlist-wb.xml を使用すると、電話機には変更が適用されません。
詳細については、『Cisco Unified Communications Manager System Guide』の「Cisco TFTP」の章、および『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」の章を参照してください。
ステップ 1 | 各カスタム呼出音の PCM ファイルを作成します(ファイルごとに呼出音 1 つ)。 PCM ファイルが、カスタム呼出音のファイル形式に示す形式のガイドラインに準拠していることを確認します。 |
ステップ 2 | 作成した新しい PCM ファイルを、クラスタ内の各 Cisco Unified Communications Manager の Cisco TFTP サーバにアップロードします。 詳細については、『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」を参照してください。 |
ステップ 3 | テキスト エディタを使用して Ringlist-wb.xml ファイルを編集します。 このファイルの形式とサンプルの Ringlist.xml ファイルについては、カスタム呼出音のファイル形式を参照してください。 |
ステップ 4 | 修正内容を保存し、Ringlist-wb.xml ファイルを閉じます。 |
ステップ 5 | 新しい Ringlist-wb.xml ファイルをキャッシュするには、Cisco Unified Serviceability を使用して TFTP サービスを停止してから起動するか、[起動時の定数および bin ファイルのキャッシングの有効化(Enable Caching of Constant and Bin Files at Startup)] TFTP サービス パラメータ([拡張サービス パラメータ(Advanced Service Parameters)] 領域に含まれる)を無効にしてから再度有効にします。 |
Ringlist.xml ファイルは、電話呼出音タイプのリストを保持した XML オブジェクトを定義しています。 このファイルには、呼出音タイプを 50 個まで記述します。 呼出音タイプごとに、呼出音タイプに使用される PCM ファイルへのポインタ、および Cisco IP Phone の [呼出音タイプ(Ring Type)] メニューに表示されるテキストを記述します。 このファイルは、各 Cisco Unified Communications Manager の Cisco TFTP サーバに保持されます。
CiscoIPPhoneRinglist XML オブジェクトは、次の簡単なタグ セットを使用して情報を記述します。
<CiscoIPPhoneRingList> <Ring> <DisplayName/> <FileName/> </Ring> </CiscoIPPhoneRingList>
定義名については、次の規則があります。 それぞれの電話呼出音タイプについて、必須の DisplayName と FileName を記述する必要があります。
(注) |
DisplayName フィールドと FileName フィールドは、長さ 25 文字以下にする必要があります。 |
次に、2 つの電話呼出音タイプを定義した Ringlist.xml ファイルの例を示します。
<CiscoIPPhoneRingList> <Ring> <DisplayName>Analog Synth 1</DisplayName> <FileName>Analog1.raw</FileName> </Ring> <Ring> <DisplayName>Analog Synth 2</DisplayName> <FileName>Analog2.raw</FileName> </Ring> </CiscoIPPhoneRingList>
呼出音の PCM ファイルを Cisco IP Phone で正常に再生するには、ファイルが次の要件を満たしている必要があります。
カスタム呼出音用の PCM ファイルを作成するには、次のファイル形式の要件に対応する任意の標準オーディオ編集パッケージを使用します。
電話機の LCD スクリーンに表示される背景イメージ(または壁紙)をユーザに提供し、選択させることができます。 ユーザは、電話機で を選択して、背景イメージを選択できます。
ユーザに見える画像の種類は、電話機が使用している TFTP サーバに保存されている PNG 画像と XML ファイル(List.xml)を元にしています。 独自の PNG ファイルを保存し、TFTP サーバ上の XML ファイルを編集すれば、ユーザが選択できる背景イメージを指定できます。 この方法を利用すれば、会社のロゴなどのカスタム画像をユーザに提供することができます。
(注) |
PNG と List.xml イメージの寸法は 800x480x24 内である必要があります。 |
すべてのファイル名で大文字と小文字が区別されます。 ファイル名に list.xml を使用すると、電話機には変更が適用されません。
Cisco Unified Communications Manager Administration(
)の [共通の電話プロファイルの設定(Common Phone Profile Configuration)] ウィンドウで [背景イメージ設定へのアクセスの有効化(Enable End User Access to Phone Background Image Setting)] チェックボックスへのエンド ユーザ アクセスをオフにして、背景イメージを選択するユーザのオプションをディセーブルにできます。 このチェックボックスをオフにしないと、 オプションが電話機に表示されません。ステップ 1 | 各画像に 2 つの PNG ファイル(フルサイズ画像とサムネール画像)を作成します。 PNG ファイルが、カスタム背景ファイル形式に示す形式のガイドラインに準拠していることを確認します。 | ||||
ステップ 2 |
作成した新しい PNG ファイルを、Cisco Unified Communications Manager の TFTP サーバの次のサブディレクトリにアップロードします。 Desktops/800x480x24
ファイルをアップロードするには、Cisco Unified Communications Operating System の管理ページで、 を選択します。 詳細については、『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」を参照してください。
|
||||
ステップ 3 |
カスタマイズした画像とファイルは、電話機がファイルを取得するためにアクセスする可能性がある他の TFTP サーバにもコピーする必要があります。
|
||||
ステップ 4 | テキスト エディタを使用して、List.xml ファイルを編集します。 このファイルがある場所、形式の要件、およびサンプル ファイルについては、カスタム背景ファイル形式を参照してください。 | ||||
ステップ 5 |
修正内容を保存し、List.xml ファイルを閉じます。
|
||||
ステップ 6 | 新しい List.xml ファイルをキャッシュするには、Cisco Unified Serviceability を使用して TFTP サービスを停止してから起動するか、[起動時の定数および bin ファイルのキャッシングの有効化(Enable Caching of Constant and Bin Files at Startup)] TFTP サービス パラメータ([拡張サービス パラメータ(Advanced Service Parameters)] 領域に含まれる)を無効にしてから再度有効にします。 |
List.xml ファイルは、背景イメージのリストを保持した XML オブジェクトを定義しています。 List.xml ファイルは TFTP サーバ上の次のサブディレクトリに保存されます。
Desktops/800x480x24
ヒント |
ディレクトリ構造と List.xml ファイルを手動で作成する場合、TFTP サービスで使用されるユーザ(CCMService)からディレクトリとファイルがアクセスできることを確認してください。 |
詳細については、『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」を参照してください。
List.xml ファイルには、背景イメージを 50 個まで記述できます。 画像は電話機の [背景イメージ(Background Images)] メニューに表示される順番にします。 各画像に対して、List.xml ファイルに ImageItem と呼ばれる要素タイプを 1 つ記述します。 ImageItem 要素には 2 つの属性があります。
次の例は、2 つの画像を定義した List.xml ファイルを示しています。 それぞれの画像について、必須の Image および URL 属性を記述する必要があります。 フルサイズ画像とサムネール画像にリンクするメソッドとしては、例で示されている TFTP URI のみがサポートされています。 HTTP URL はサポートされていません。
<CiscoIPPhoneImageList> <ImageItem Image="TFTP:Desktops/800x480x24/TN-Fountain.png" URL="TFTP:Desktops/640x480x24/Fountain.png"/> <ImageItem Image="TFTP:Desktops/800x480x24/TN-FullMoon.png" URL="TFTP:Desktops/640x480x24/FullMoon.png"/> </CiscoIPPhoneImageList>
Cisco IP Phone のファームウェアには、デフォルトの背景イメージが含まれています。 List.xml ファイルでは、この画像を定義していません。 デフォルト画像は、常に電話機の [背景イメージ(Background Images)] メニューの最初に表示されます。
ヒント |
多くの画像プログラムで画像のサイズを変更する機能を提供しています。 サムネール画像を作成する簡単な方法としては、まずフルサイズ画像を作成して保存します。そして、画像プログラムのサイズ変更機能を使用して元のサイズの 25% の画像を作成します。 サムネール画像には異なる名前を付けて保存します。 |
背景画像の PNG ファイルを Cisco IP Phone で正常に表示するには、ファイルが次の要件を満たしている必要があります。
ヒント |
グレースケール用のポスタリゼーション機能をサポートする画像プログラムを使用している場合、チャネルごとの階調レベルの数を 16 に設定すると、画像は 16 段階のグレースケールになるようポスタリゼーションがかかります。 |
デフォルトでは、G.722 コーデックが Cisco IP Phone 8841、8851、8861 で有効です。 Cisco Unified Communications Manager が G.722 を使用するように設定されており、通話先が G.722 をサポートしている場合、G.711 の代わりに G.722 コーデックを使用してコールを接続します。
この状態は、ユーザがワイドバンド ヘッドセットまたはワイドバンド ハンドセットを有効にしているかどうかを問わず発生します。ヘッドセットまたはハンドセットが有効になっている場合、ユーザはコール中の音声の感度がより高く感じられます。 感度が高いことで音声の明瞭さは増しますが、紙が擦れる音や近くの会話など通話先から聞こえる背景のノイズもより多く聞こえます。 ワイドバンド ヘッドセットまたはハンドセットがない場合でも、G.722 の高い感度を煩わしく感じるユーザもいます。 ユーザの中には G.722 の高い感度を好むユーザもいます。
[G.722 および iSAC コーデックのアドバタイズ(Advertise G.722 and iSAC Codec)] サービス パラメータは、パラメータが設定されている [Cisco Unified Communications Manager の管理(Cisco Unified Communications Manager Administration)] ウィンドウによって、この Cisco Unified Communications Manager サーバまたは特定の電話機に登録されたすべてのデバイスに対してワイド バンドがサポートされているかどうかに影響します。
ステップ 1 |
すべてのデバイスにワイド バンドのサポートを設定する方法:
|
ステップ 2 |
特定のデバイスにワイド バンドのサポートを設定する方法:
|
電話機のスクリーンに表示されるアイドル表示(テキストのみ。テキスト ファイルのサイズは 1 MB 以下)を指定できます。 アイドル表示は XML サービスです。このサービスは、指定された期間にわたって電話機がアイドル(未使用)状態にあり、機能メニューが開いていない場合に、電話機によって呼び出されます。
アイドル表示の作成および表示方法の詳細については、次の URL で『Creating Idle URL Graphics on Cisco IP Phone』を参照してください。
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml
また、次の情報については、『Cisco Unified Communications Manager Administration Guide』または『Cisco Unified Communications Manager Bulk Administration Guide』を参照してください。
目次
カスタム電話呼出音
Cisco IP Phone は、ハードウェアに組み込みの「Sunshine」をデフォルトの呼出音として出荷されます。 Cisco Unified Communications Manager には、一連の追加の電話呼出音もデフォルトで付属しており、これらはパルス符号変調(PCM)ファイルとしてソフトウェアに実装されています。 PCM ファイルは、サイトで使用できる呼出音リスト オプションを記述した XML ファイル(Ringlist-wb.xml)とともに、各 Cisco Unified Communications Manager サーバの TFTP ディレクトリに配置されています。
注目:すべてのファイル名で大文字と小文字が区別されます。 ファイル名に ringlist-wb.xml を使用すると、電話機には変更が適用されません。
詳細については、『Cisco Unified Communications Manager System Guide』の「Cisco TFTP」の章、および『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」の章を参照してください。
カスタム電話呼出音のセットアップ
手順
ステップ 1 各カスタム呼出音の PCM ファイルを作成します(ファイルごとに呼出音 1 つ)。 PCM ファイルが、カスタム呼出音のファイル形式に示す形式のガイドラインに準拠していることを確認します。 ステップ 2 作成した新しい PCM ファイルを、クラスタ内の各 Cisco Unified Communications Manager の Cisco TFTP サーバにアップロードします。 詳細については、『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」を参照してください。 ステップ 3 テキスト エディタを使用して Ringlist-wb.xml ファイルを編集します。 このファイルの形式とサンプルの Ringlist.xml ファイルについては、カスタム呼出音のファイル形式を参照してください。 ステップ 4 修正内容を保存し、Ringlist-wb.xml ファイルを閉じます。 ステップ 5 新しい Ringlist-wb.xml ファイルをキャッシュするには、Cisco Unified Serviceability を使用して TFTP サービスを停止してから起動するか、[起動時の定数および bin ファイルのキャッシングの有効化(Enable Caching of Constant and Bin Files at Startup)] TFTP サービス パラメータ([拡張サービス パラメータ(Advanced Service Parameters)] 領域に含まれる)を無効にしてから再度有効にします。
カスタム呼出音のファイル形式
Ringlist.xml ファイルは、電話呼出音タイプのリストを保持した XML オブジェクトを定義しています。 このファイルには、呼出音タイプを 50 個まで記述します。 呼出音タイプごとに、呼出音タイプに使用される PCM ファイルへのポインタ、および Cisco IP Phone の [呼出音タイプ(Ring Type)] メニューに表示されるテキストを記述します。 このファイルは、各 Cisco Unified Communications Manager の Cisco TFTP サーバに保持されます。
CiscoIPPhoneRinglist XML オブジェクトは、次の簡単なタグ セットを使用して情報を記述します。
<CiscoIPPhoneRingList> <Ring> <DisplayName/> <FileName/> </Ring> </CiscoIPPhoneRingList>定義名については、次の規則があります。 それぞれの電話呼出音タイプについて、必須の DisplayName と FileName を記述する必要があります。
- DisplayName には、関連付けられた PCM ファイルのカスタム呼出音の名前を指定します。この名前は、Cisco IP Phone の [呼出音タイプ(Ring Type)] メニューに表示されます。
- FileName には、DisplayName に関連付けるカスタム呼出音の PCM ファイルの名前を指定します。
(注)
DisplayName フィールドと FileName フィールドは、長さ 25 文字以下にする必要があります。
次に、2 つの電話呼出音タイプを定義した Ringlist.xml ファイルの例を示します。
<CiscoIPPhoneRingList> <Ring> <DisplayName>Analog Synth 1</DisplayName> <FileName>Analog1.raw</FileName> </Ring> <Ring> <DisplayName>Analog Synth 2</DisplayName> <FileName>Analog2.raw</FileName> </Ring> </CiscoIPPhoneRingList>呼出音の PCM ファイルを Cisco IP Phone で正常に再生するには、ファイルが次の要件を満たしている必要があります。
- 未加工の PCM(ヘッダーなし)。
- サンプリング回数:8,000 回/秒。
- 1 サンプルあたり 8 ビット。
- Mu-law 圧縮
- 呼出音の最大サイズ = 16080 サンプル
- 呼出音の最小サイズ = 240 サンプル
- 呼出音のサンプル数 = 240 の倍数。
- 呼出音は、ゼロ交差で開始および終了する。
カスタム呼出音用の PCM ファイルを作成するには、次のファイル形式の要件に対応する任意の標準オーディオ編集パッケージを使用します。
カスタム背景イメージ
電話機の LCD スクリーンに表示される背景イメージ(または壁紙)をユーザに提供し、選択させることができます。 ユーザは、電話機で を選択して、背景イメージを選択できます。
ユーザに見える画像の種類は、電話機が使用している TFTP サーバに保存されている PNG 画像と XML ファイル(List.xml)を元にしています。 独自の PNG ファイルを保存し、TFTP サーバ上の XML ファイルを編集すれば、ユーザが選択できる背景イメージを指定できます。 この方法を利用すれば、会社のロゴなどのカスタム画像をユーザに提供することができます。
(注)
PNG と List.xml イメージの寸法は 800x480x24 内である必要があります。
注目:すべてのファイル名で大文字と小文字が区別されます。 ファイル名に list.xml を使用すると、電話機には変更が適用されません。
Cisco Unified Communications Manager Administration(
)の [共通の電話プロファイルの設定(Common Phone Profile Configuration)] ウィンドウで [背景イメージ設定へのアクセスの有効化(Enable End User Access to Phone Background Image Setting)] チェックボックスへのエンド ユーザ アクセスをオフにして、背景イメージを選択するユーザのオプションをディセーブルにできます。 このチェックボックスをオフにしないと、 オプションが電話機に表示されません。カスタム背景イメージのセットアップ
手順
ステップ 1 各画像に 2 つの PNG ファイル(フルサイズ画像とサムネール画像)を作成します。 PNG ファイルが、カスタム背景ファイル形式に示す形式のガイドラインに準拠していることを確認します。 ステップ 2 作成した新しい PNG ファイルを、Cisco Unified Communications Manager の TFTP サーバの次のサブディレクトリにアップロードします。 Desktops/800x480x24
(注) ファイル名とサブディレクトリのパラメータは大文字と小文字を区別します。 サブディレクトリのパスを指定する場合は、前方スラッシュ「/」を使用してください。
ファイルをアップロードするには、Cisco Unified Communications Operating System の管理ページで、
を選択します。 詳細については、『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」を参照してください。
(注) フォルダが存在しない場合、フォルダが作成され、そのフォルダにファイルがアップロードされます。
ステップ 3 カスタマイズした画像とファイルは、電話機がファイルを取得するためにアクセスする可能性がある他の TFTP サーバにもコピーする必要があります。
(注) Cisco はカスタム画像ファイルのバックアップ コピーを他の場所にも保存することを推奨します。 これらのバックアップ コピーは、Cisco Unified Communications Manager のアップグレードの際、カスタマイズしたファイルが上書きされてしまうときに使用することができます。
ステップ 4 テキスト エディタを使用して、List.xml ファイルを編集します。 このファイルがある場所、形式の要件、およびサンプル ファイルについては、カスタム背景ファイル形式を参照してください。 ステップ 5 修正内容を保存し、List.xml ファイルを閉じます。
(注) Cisco Unified Communications Manager をアップグレードする際、デフォルトの List.xml ファイルによって、カスタマイズした List.xml ファイルが置き換えられます。 List.xml ファイルをカスタマイズした後、ファイルのコピーを作成し他の場所に保存してください。 Cisco Unified Communications Manager をアップグレードした後、デフォルトの List.xml ファイルを保存しておいたコピーに置き換えます。
ステップ 6 新しい List.xml ファイルをキャッシュするには、Cisco Unified Serviceability を使用して TFTP サービスを停止してから起動するか、[起動時の定数および bin ファイルのキャッシングの有効化(Enable Caching of Constant and Bin Files at Startup)] TFTP サービス パラメータ([拡張サービス パラメータ(Advanced Service Parameters)] 領域に含まれる)を無効にしてから再度有効にします。
カスタム背景ファイル形式
List.xml ファイルは、背景イメージのリストを保持した XML オブジェクトを定義しています。 List.xml ファイルは TFTP サーバ上の次のサブディレクトリに保存されます。
Desktops/800x480x24
ヒント
ディレクトリ構造と List.xml ファイルを手動で作成する場合、TFTP サービスで使用されるユーザ(CCMService)からディレクトリとファイルがアクセスできることを確認してください。
詳細については、『Cisco Unified Communications Operating System Administration Guide』の「Software Upgrades」を参照してください。
List.xml ファイルには、背景イメージを 50 個まで記述できます。 画像は電話機の [背景イメージ(Background Images)] メニューに表示される順番にします。 各画像に対して、List.xml ファイルに ImageItem と呼ばれる要素タイプを 1 つ記述します。 ImageItem 要素には 2 つの属性があります。
- Image:電話機の [背景イメージ(Background Images)] メニューに表示されるサムネール画像の取得先を示す Uniform Resource Identifier(URI)。
- URL:フルサイズ画像の取得先を指定する URI。
次の例は、2 つの画像を定義した List.xml ファイルを示しています。 それぞれの画像について、必須の Image および URL 属性を記述する必要があります。 フルサイズ画像とサムネール画像にリンクするメソッドとしては、例で示されている TFTP URI のみがサポートされています。 HTTP URL はサポートされていません。
<CiscoIPPhoneImageList> <ImageItem Image="TFTP:Desktops/800x480x24/TN-Fountain.png" URL="TFTP:Desktops/640x480x24/Fountain.png"/> <ImageItem Image="TFTP:Desktops/800x480x24/TN-FullMoon.png" URL="TFTP:Desktops/640x480x24/FullMoon.png"/> </CiscoIPPhoneImageList>Cisco IP Phone のファームウェアには、デフォルトの背景イメージが含まれています。 List.xml ファイルでは、この画像を定義していません。 デフォルト画像は、常に電話機の [背景イメージ(Background Images)] メニューの最初に表示されます。
- フルサイズ画像:電話機で表示される画像。
- サムネール画像:ユーザが画像を選択できる [背景イメージ(Background Images)] 画面に表示される画像。 フルサイズ画像の 25% のサイズである必要があります。
ヒント
多くの画像プログラムで画像のサイズを変更する機能を提供しています。 サムネール画像を作成する簡単な方法としては、まずフルサイズ画像を作成して保存します。そして、画像プログラムのサイズ変更機能を使用して元のサイズの 25% の画像を作成します。 サムネール画像には異なる名前を付けて保存します。
背景画像の PNG ファイルを Cisco IP Phone で正常に表示するには、ファイルが次の要件を満たしている必要があります。
ヒント
グレースケール用のポスタリゼーション機能をサポートする画像プログラムを使用している場合、チャネルごとの階調レベルの数を 16 に設定すると、画像は 16 段階のグレースケールになるようポスタリゼーションがかかります。
ワイドバンド コーデックのセットアップ
手順デフォルトでは、G.722 コーデックが Cisco IP Phone 8841、8851、8861 で有効です。 Cisco Unified Communications Manager が G.722 を使用するように設定されており、通話先が G.722 をサポートしている場合、G.711 の代わりに G.722 コーデックを使用してコールを接続します。
この状態は、ユーザがワイドバンド ヘッドセットまたはワイドバンド ハンドセットを有効にしているかどうかを問わず発生します。ヘッドセットまたはハンドセットが有効になっている場合、ユーザはコール中の音声の感度がより高く感じられます。 感度が高いことで音声の明瞭さは増しますが、紙が擦れる音や近くの会話など通話先から聞こえる背景のノイズもより多く聞こえます。 ワイドバンド ヘッドセットまたはハンドセットがない場合でも、G.722 の高い感度を煩わしく感じるユーザもいます。 ユーザの中には G.722 の高い感度を好むユーザもいます。
[G.722 および iSAC コーデックのアドバタイズ(Advertise G.722 and iSAC Codec)] サービス パラメータは、パラメータが設定されている [Cisco Unified Communications Manager の管理(Cisco Unified Communications Manager Administration)] ウィンドウによって、この Cisco Unified Communications Manager サーバまたは特定の電話機に登録されたすべてのデバイスに対してワイド バンドがサポートされているかどうかに影響します。
ステップ 1 すべてのデバイスにワイド バンドのサポートを設定する方法:
ステップ 2 特定のデバイスにワイド バンドのサポートを設定する方法:
未使用時画面のセット アップ
手順電話機のスクリーンに表示されるアイドル表示(テキストのみ。テキスト ファイルのサイズは 1 MB 以下)を指定できます。 アイドル表示は XML サービスです。このサービスは、指定された期間にわたって電話機がアイドル(未使用)状態にあり、機能メニューが開いていない場合に、電話機によって呼び出されます。
アイドル表示の作成および表示方法の詳細については、次の URL で『Creating Idle URL Graphics on Cisco IP Phone』を参照してください。
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml
また、次の情報については、『Cisco Unified Communications Manager Administration Guide』または『Cisco Unified Communications Manager Bulk Administration Guide』を参照してください。