この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
Cisco Unified CM IM and Presence Service Lync Remote Call Control プラグインは、IM and Presence メニューアイテム Microsoft Lync クライアント インターフェイスに追加し、ユーザがコントロールする電話デバイスの選択を可能にします。 ユーザが複数のデバイス(回線)を持つ場合は、プラグインをインストールする必要があります。 ユーザが IM and Presence メニュー アイテムを選択すると、IM and Presence がユーザのデフォルトの Web ブラウザで Web ページを開きます。 ユーザは、コントロールする電話デバイスをこの Web ページから選択できます。
この手順を実行するには、addrccmenu.bat という Cisco Unified CM IM and Presence Lync Remote Call Control プラグインのバッチファイルが必要です。このファイルは、Cisco Unified CM IM and Presence 管理アプリケーションからダウンロードできます。 を選択して Cisco Unified CM IM and Presence Lync Remote Call Control プラグインをダウンロードします。 バッチ ファイルは zip ファイルとしてダウンロードされます。 この zip ファイルを Microsoft Lync クライアント コンピュータ上に保存し、解凍する必要があります。
Microsoft Lync クライアントが IM and Presence メニュー アイテムにアクセスした際、IM and Presence Web ページがデフォルトの Web ブラウザで開かない場合、IM and Presence ページを、Microsoft Lync クライアントのデフォルトの Web ブラウザから開くことができないを参照してください。
Cisco Unified CM IM and Presence Lync Remote Call Control プラグインをアンインストールするには、IM and Presence サーバの IP アドレス、ホスト名または FQDN を指定せずに、バッチ ファイルを再実行します。
ステップ 1 | zip ファイルを Microsoft Lync コンピュータにダウンロードし、解凍します。 |
ステップ 2 | Windows のコマンド プロンプトを開きます。 |
ステップ 3 | 解凍した addrccmenu.bat ファイルの場所に移動します。 |
ステップ 4 | コマンド ラインで、次のコマンドを実行します。 addrccmenu.bat |
ステップ 5 | regedit のセキュリティ警告が表示されても、操作を続行します。 |
ステップ 6 | 操作が完了したら、 Microsoft Lync からサインアウトします。 |
ステップ 7 | 再度 Microsoft Lync クライアントにサインインし、[ツール(Tools)] メニュー オプションを選択します。 Cisco メニュー アイテムが表示されなくなります。 |