2018年4月9日
|
|
2018年2月23日
|
「Connect をユーザに有効化」の下で、新しい問題が「Hybrid Call Service Aware および Connect の既知の問題と制限事項」に追加されました。
ハイブリッド コール ユーザのリモート接続先(user@example.call.ciscospark.com など)は、同時に Cisco Spark-RD とリモート接続先プロファイルの両方に関連付けることはできません。それ以外の場合、リモート デバイスはアクティブ化しません。
|
2018年2月16日
|
新しいセクションとして、Cisco Spark ハイブリッド コール サービスのアラームが追加されました。
|
2017 年 12 月 18 日
|
CTI-RD を Cisco Spark-RD に移行できるツールに関する新しいセクションが追加されました。このツールは Expressway-C コネクタ ホスト上で有効になり、Cisco Spark-RD はハイブリッド コーリング展開に強く推奨するオプションです。
リモート デバイスのタスクに、「Cisco Spark-RD の場合、CSS は、Cisco Spark アプリで開始された、エンタープライズ フォンまたは PSTN への発信コールに使用されます」という記述が追加されました。"再ルーティングの CSS は、シスコのコラボレーション クラウドに分岐される前提の電話への着信コールに使用されます。"
|
2017年12月5日
|
Hybrid Connectivity テスト ツールを使用したトラブルシューティングで、『Troubleshooting Guide for Cisco Spark Hybrid Call Service Connect』へのリンクが追加されました。
|
2017年11月28日
|
Hybrid Connectivity テスト ツール用と、Expressway-E SIP 接続先への TLS 接続を開始するトラブルシューティング ツール用のドキュメントが追加されました。その結果には、Expressway-E が到達可能でセキュアであるかどうかが示されます。
|
2017年11月22日
|
Unified CM、Expressway-C、および Expressway-C 展開のセクションで、[SIPパラメータの保持(SIP Parameter Preservation)] は、エンタープライズとやり取りするコール ルーティングに関係したすべての
Expressway のすべてのゾーンでオンにする必要があるという記述が追加されました。
|
2017年11月7日
|
|
2017 年 10 月 30 日
|
サポートされている認証局のセクションが削除され、「this knowledge base article that lists supported certificate authorities for Cisco Spark」へのリンクで置き換えられました。
|
2017年9月28日
|
|
2017年9月20日
|
新しいセクションとして、高可用性が追加されました。Spark リモート デバイスの概要にさらに詳細が追加されました(デバイス タイプが対応する CTI-RD 制限を含む)。
|
2017年9月7日
|
Cisco Spark-RD リリースの追加:Unified CM 11.0(1a)SU3 および 12.0(1)。
SME(Unified CM 12.0(1))を、各 Unified CM クラスタ用の Expressway-C ネイバー ゾーンの作成のオプションとして追加しました。
|
2017年9月1日
|
|
2017年8月23日
|
更新された Cisco Spark リモート デバイス(Spark-RD)のサポートに関する文章を書き換えました。サポートされている Unified CM バージョンは 10.5(2)SU5、11.0(1)SU3、および 11.5(1)SU3
です。
|
2017年7月24日
|
新たに「既知の問題と制限事項」のセクションを追加しました。「シンプレックス障害」の意味を容量に関するガイドラインで明確にしました。
|
2017年7月6日
|
|
2017年6月30日
|
Hybrid Call Service の要件 を更新し、Hybrid Call Service Connect コールはモバイル リモート アクセス(MRA)、Business-To-Business(B2B)コール、および既存の Expressway-C および E のペアをトラバースするコールと同じに分類されことを明記しました。
|