アベイラビリティおよびインスタント メッセージの概要
IM and Presence Service を使用すると、ユーザは自身のステータスを連絡先と共有することができます。
ポイントツーポイント インスタント メッセージ機能は、一度に 2 人のユーザ間のリアルタイム会話をサポートします。IM and Presence Service は、送信者から受信者へのユーザ間のメッセージを直接交換します。ポイントツーポイントのインスタント メッセージを交換するには、ユーザがインスタント メッセージクライアントでオンラインである必要があります。
インスタント メッセージング機能には、以下があります。
- インスタント メッセージ フォーキング機能
-
複数のインスタント メッセージ クライアントにログインしている連絡先にユーザがインスタント メッセージを送信すると、IM and Presence Service が各クライアントにインスタント メッセージを配信します。IM and Presence Service は、連絡先が応答するまで IM を各クライアントへのフォーキングを継続して行います。連絡先が応答すると、IM and Presence Service は連絡先が応答したクライアントのみに IM を配信します。
- オフライン インスタント メッセージング
-
ログインしていない(オフライン)連絡先にユーザがインスタントメッセージを送信すると、IM and Presence Service はインスタント メッセージを保存し、オフラインの連絡先がインスタント メッセージ クライアントに再度サインインした際に、そのメッセージを配信します。
- インスタント メッセージ のブロードキャスト
-
ユーザは同時に複数の連絡先に インスタント メッセージ を送信することができます。たとえば、ユーザは、大規模なグループの連絡先に通知を送信することができます。
すべてのインスタント メッセージ クライアントでブロードキャストがサポートされているわけではないことに注意してください。
連絡先リストの最大サイズ
ユーザの連絡先リストの最大サイズを設定することができます。これはユーザが連絡先リストに追加することができる連絡先の数です。この設定は、Cisco Jabber クライアント アプリケーションとサードパーティ クライアント アプリケーションの連絡先リストに適用されます。
連絡先の最大数に到達したユーザは、連絡先リストに新しい連絡先を追加できず、他のユーザもそのユーザを連絡先として追加できません。ユーザが連絡先リストの最大サイズに近く、最大数を超える連絡先を連絡先リストに追加すると、IM and Presence Service は超過した連絡先を追加しません。たとえば、IM and Presence Service の連絡先リストの最大サイズが 200 であるとします。ユーザに 195 件の連絡先があり、ユーザが 6 件の新しい連絡先をリストに追加しようとすると、IM and Presence Service は 5 件の連絡先を追加し、6 件目の連絡先を追加しません。
ヒント |
連絡先リストのサイズが上限に到達しているユーザがいると、Cisco Unified CM IM and Presence管理のシステムのトラブルシューティングに表示されます。 |