IM アドレス スキーム:
IM and Presence Service は、次の 2 種類の IM アドレス指定スキームをサポートしています。
-
UserID@Default_Domainが、IM and Presence Service をインストールした場合の、デフォルトの IM アドレス スキームです。
-
Directory URI IM アドレス スキームは、複数のドメイン、ユーザのメール アドレスの調整、および Microsoft SIP URI の調整をサポートしています。
すべての IM and Presence Service クラスタ全体で、同じIM アドレス スキームを使用する必要があります。
User@Default_Domain を使用した IM アドレス
UserID@Default_Domainが、IM and Presence Service をインストールした場合の、デフォルトの IM アドレス スキームです。
UserID @ Default_Domain の IM アドレス スキームを使用すると、すべての IM アドレスが単一のデフォルト IM ドメインの一部となります。デフォルト ドメイン値は、すべてのクラスタ全体で一貫している必要があります。IM アドレスは IM and Presence のデフォルト ドメイン の一部であるため、複数ドメインはサポートされません。
UserID は、フリー フォームまたは LDAP から同期することができます。次のフィールドがサポートされます。
-
sAMAccountName
-
ユーザ プリンシパル名 (UPN)
-
電子メール アドレス
-
従業員番号
-
電話番号
UserID を Cisco Unified Communications Managerの LDAP フィールドにマップする場合、その LDAP マッピングはすべてのクラスタ全体で一貫している必要があります。
ユーザ ID は電子メール アドレスにマッピング可能ですが、それが IM URI が電子メール アドレスと同じであるという意味ではありません。代わりに<email-address>@Default_Domainとなります。たとえば、amckenzie@example.com @sales-example.com
です。選択した設定をマッピングする Active Directory(AD)は、IM and Presence サービス クラスタ内のすべてのユーザに対してグローバルに適用されます。個々のユーザに対して異なるマッピングを設定することはできません。
ディレクトリ URI を使用した IM アドレス
ディレクトリ URI のアドレス スキームを使用して、ユーザの IM アドレスを Cisco Unified Communications Manager のディレクトリ URI に合わせます。
ディレクトリ URI の IM アドレス スキームには、次の IM アドレス指定機能があります。
-
複数ドメインのサポート。IM アドレスは、1 つの IM and Presence Service ドメインだけを使用する必要はありません。
-
ユーザのメール アドレスの調整。ユーザのメール アドレスと合わせるように Cisco Unified Communications Manager のディレクトリ URI を設定することで、メール、IM、音声、および動画の通信にユーザの ID を一貫して指定できるようになります。
-
Microsoft SIP URI の調整。Microsoft SIP URI と合わせるように Cisco Unified Communications Manager のディレクトリ URI を設定することで、Microsoft OCS/Lync から IM and Presence Service への移行時に、ユーザの ID を確実に維持できるようになります。
IM アドレス スキームとしてディレクトリ URI を使用するようにノードを設定する場合は、ディレクトリ URI をサポートするクライアントのみを展開することを推奨します。ディレクトリ URI をサポートしないクライアントは、ディレクトリ URI IM アドレス スキームが有効になっている場合は動作しません。ディレクトリ URI をサポートしないクライアントが展開されている場合は、UserID@Default_Domain IM アドレス スキームを使用し、ディレクトリ URI IM アドレス スキームは使用しないでください。
ディレクトリ URI IM アドレス設定はグローバルであり、クラスタ内のすべてのユーザに適用されます。クラスタ内の個々のユーザに対して異なるディレクトリ URI IM アドレスを設定できません。
外部 LDAP ディレクトリからのディレクトリ URI のプロビジョニングの詳細については、LDAP ディレクトリの設定を参照してください。
複数の IM ドメイン
IM and Presence Service は、複数の IM アドレス ドメイン全体で IM アドレッシングをサポートし、システム内のすべてのドメインを自動的にリストします。ドメインの追加、編集、または削除を行うことができます。IM ドメインの設定の詳細は、ドメインの設定の概要を参照してください。
Cisco Expressway を相互運用している場合は、http://www.cisco.com/c/en/us/support/unified-communications/expressway-series/products-maintenance-guides-list.htmlの Cisco Expressway 管理ガイド を参照してください。