インストール中のネットワーク エラー
インストール処理中、入力されたネットワーク設定を使ってサーバがネットワークに正常に接続できるかどうかが、インストール プログラムによって検証されます。接続できない場合はメッセージが表示され、次のいずれかのオプションを選択するよう求められます。
-
[再試行(RETRY)]:インストール プログラムによって、ネットワーキングの検証が再試行されます。再び検証が失敗した場合は、もう一度エラー ダイアログボックスが表示されます。
-
[確認(インストールのチェック)(REVIEW (Check Install))]:このオプションでは、ネットワーキング設定を確認して変更できます。検出されると、インストール プログラムはネットワーク設定ウィンドウに戻ります。
-
ネットワーク ウィンドウの入力を完了するたびにネットワークが検証されるため、メッセージが何度も表示される場合があります。
-
[停止(HALT)]:インストールを停止します。リカバリ CD を使用してログをリカバリし、診断情報にアクセスする必要があります。詳細については、CUCM VM 上でリカバリ ソフトウェアを入手し実行するを参照してください。
(注)
CentOS の制限により、ログをシリアル ポートにダンプすることによりログを収集する方式はサポートされなくなりました。
-
[無視(IGNORE)]:インストールを続行します。ネットワーキング エラーは、ログに記録されます。場合によっては、インストール プログラムによるネットワーキングの検証が複数回行われ、このエラー ダイアログボックスが複数回表示されることがあります。ネットワーク エラーを無視することを選択すると、インストールが失敗する場合があります。
リカバリ CD を使用してログをリカバリする手順
リカバリ CD を使用してログをリカバリし、診断情報にアクセスする必要があります。次の手順を実行します。
-
リカバリ CD を挿入します。
-
システムをリブートします。
-
リカバリ CD メニューが表示されたら、Alt + F2 を押してコマンド プロンプトを表示します。
-
「df -h」コマンドを実行して、最大のパーティションを見つけます。(ここでは /mnt/part6 だったとします)。
-
/mnt/part6/log/install/ ディレクトリでインストール ログを見つけます。
-
ログを収集します。