インストール方法のタスク フロー
インストール方法のタスク フローのいずれかを選択します。
タスク フロー |
説明 |
---|---|
以下の展開のいずれかの基本インストールには、この方法を使用します。
|
|
このタスク フローを使用すれば、手動の介入を必要とせずに、Unified Communications Manager または IM and Presence Service クラスタを動的にインストールできます。集中型または標準 (分散型) IM and Presence 展開のいずれかに適用されます。 |
|
スキップインストール OVAを使用し、この方法で、Unified Communications Manager または IM and Presence Service クラスタをインストールします。 |
|
データ インポート インストールを使用し、次のタスクを実行して、Unified Communications Manager または IM and Presence Service クラスタをインストールします。 |
|
既存の Unified Communications Manager または IM and Presence サービス クラスタを追加する場合、次のタスクを実行します。 |
インストール ウィザードの考慮事項
インストールを開始する前に、次の情報を確認してください。
-
インストール先のサブスクライバ ノードがインストール中にパブリッシャ ノードに接続できることを確認してください。
-
クラスタ内のすべての Unified Communications Manager サーバのソフトウェア バージョンが同じであることを確認してください。クラスタ内のすべての IM and Presence サーバーのソフトウェアのバージョンが、同じリリース のものであることを確認してください。ただし、クラスタ ソフトウェアをアップグレードする際に限り、処理のため一時的に不一致の状態にできます。IM and Presence Service ノードをインストールする場合は、Unified Communications Manager と IM and Presence Service のソフトウェア バージョンのメジャー リリース番号およびマイナー リリース番号が同じである必要があります。
-
既存のクラスタをインストールしている場合、インストール中に設定タスクを行わないでください。
-
インストール プログラム実行中に入力するディレクトリ名およびファイル名では、大文字と小文字が区別されるので注意してください。
-
IM and Presence Service のインストールについては、IM and Presence Service を集中型クラスタ展開または標準展開(非集中型/分散型)のどちらでインストールするかを確認してください。
インストール ウィザード
インストール ウィザードでのナビゲーション方法の説明については、次の表を参照してください。
操作内容 |
使用するキー |
---|---|
次のフィールドへ移動する |
Tab |
前のフィールドへ移動する |
Alt+Tab |
オプションを選択する |
Space バーまたは Enter |
一覧を上下へスクロールする |
↑または↓ |
前のウィンドウへ移動する |
Space バーまたは Enter キーを押し、[戻る(Back)] を選択(使用可能な場合) |
ウィンドウに関するヘルプ情報を参照する |
Space バーまたは Enter キーを押し、[ヘルプ(Help)] を選択(使用可能な場合) |
Note |
インストール ウィザードは、次の文字をサポートします。
他のすべての文字はサポートされていません |