システム設定
[システム設定(System Settings)] ページで、マスター アプリケーションを設定します。このページで、監視するレスポンダ(PCA ノード)を追加できます。
-
[はい(Yes)] をクリックすると、マスターノードが有効になります。
-
[いいえ(No)] をクリックすると、マスター ノードが無効になります。「UC運用ダッシュボードのマスターノードを無効にしますか」というメッセージが表示されます。
-
[はい(YES)] をクリックして、マスターノードの削除を確認します。
(注) |
マスターの有効化は、デフォルトで [はい(Yes)] の状態にあります。マスターを無効にすると、マスターとそれに関連付けられたレスポンダとの間で通信は行われません。 |
関連付けられたレスポンダの追加または削除
表には、関連付けられているレスポンダの一覧が示されています。
フィールド |
説明 |
---|---|
ホスト名 |
レスポンダノードのホスト名です。 |
IP アドレス |
レスポンダノードの IP アドレスです。 |
管理されたクラスタ数 |
関連付けられたレスポンダノードで管理されているクラスタの数です。 |
レスポンダ ステータス |
Master に登録したレスポンダのステータスを表示します。 |
登録日時 |
レスポンダを Master に登録、または登録解除された日時です。 |
ステータス理由 |
Master に登録した各レスポンダのステータスに関する理由を示します。さまざま理由が、次のとおりに表示されます。
|
関連付けられたレスポンダの追加または削除
-
[追加(Add)] をクリックして、関連付けられたレスポンダを追加します。
ポップアップした [レスポンダ IP(Responder IP)] フィールドに、追加するコンマ区切りのマスター IP アドレスまたはホスト名を入力します。
-
削除するレスポンダのボックスをオンにします。
[選択したレスポンダを削除しますか(Do you want to delete the selected Responder(s))] というメッセージが表示されます。
選択したレスポンダを削除するには、[はい(Yes)] をクリックします。
選択したレスポンダを維持するには、[いいえ(No)] をクリックします。
(注)
[システム設定(System Settings)] ページでレスポンダを削除すると、対応するクラスタ データも削除されます。
ジョブ頻度の設定
[Cluster Summary Job Frequency] のドロップダウン ボックスを使用し、必要に応じてクラスタ概要のジョブ頻度を 1、3、5、または 10 分に設定します。
(注) |
デフォルトの時間間隔は 5 分です。 |
[適用(Apply)] をクリックします。
(注) |
|
共有秘密キーの設定
手順
-
マスターの設定中に [レスポンダ設定(Responder settings)] ページで設定したのと同じ共有秘密キーを入力します。
-
Master と関連付けられたレスポンダの両方に同じキーを提供する必要があります。
-
[システム設定(System Settings)] ページですべてのフィールドを設定したら、[適用(Apply)] をクリックします。