この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
ストック レポートは、あらかじめバンドルされ、シスコがサポートするレポートです。ストック レポートをコピーし、コピーしたレポートを編集して視覚的にカスタマイズできます。別の名前を付けて、レポートのコピーを保存します。
(注) | デフォルトでは、レポート ユーザにはレポートの下にサブカテゴリを作成する権限がありません。管理者は、サブカテゴリを作成してアクセス権を付与し、ユーザがその新しいサブカテゴリ内にサブカテゴリを作成できるようにする必要があります。 |
グリッドはデータを行と列の表形式で表します。デフォルトでは、シスコのストック レポートには 1 つのグリッド ビューがあります。ストック レポートに対して追加のグリッド ビューを作成できます。カスタム レポートの場合は、[レポート定義(Report Definition)] で SQL クエリーからデフォルト グリッドが作成されます。
(注) | グループ化はライブ データ レポートではサポートされていません。 |
以下はグリッド ビューを作成する手順です。
ゲージには、単一のレポート メトリック(数値)のステータスが表示されます。これは、複数のメトリックまたは複雑な相互関係を表示することは意図していません。Unified Intelligence Center のゲージは、機能と外観の両方において、自動車の速度計に類似しています。Unified Intelligence Center で設計するゲージは、可動の針を備えた半円のグラフィックです。ゲージには、値が正常範囲内である視覚的なインジケータが表示されます。
(注) | ライブ データ レポートは、ゲージ ビューをサポートしていません。 |
(注) | フィールドにフッターがない場合、レポートを実行したときに、フッター値がヌルである、または数字ではないことを表すエラーが表示されます。フィールドに対してフッターを設定する必要があります。 |
次に、ゲージ ビューを作成する手順について説明します。
Cisco Unified Intelligence Center には、円グラフ、棒グラフ、折れ線グラフの 3 種類のグラフが用意されています。
(注) | ライブ データ レポートは、グラフ ビューをサポートしていません。 |
(注) | キリル文字では、垂直方向のグラフの場合、[横軸(Horizontal Axis)] フィールドのデータ ラベルがまったく表示されないか、文字化けすることがあります。これは既知の根本的な制限です。キリル文字の場合は、水平方向のグラフを表示してください。
|
次に、グラフ ビューを作成する手順について説明します。
ステップ 1 | [レポート(Reports)] に移動します。 | ||||
ステップ 2 | [レポート(Reports)] をクリックし、[利用可能なレポート(Available Reports)] を表示します。 | ||||
ステップ 3 | [レポート(Reports)] フォルダを展開します。 | ||||
ステップ 4 | 適切なフォルダでレポートを探します。 | ||||
ステップ 5 | レポートを右クリックして、[ビューの編集(Edit Views)] を選択します。レポートのすべてのビューを含む新しいタブが開きます。 | ||||
ステップ 6 | [作成(Create)]の下で、ドロップダウン リストから [グラフ(Chart)]を選択します。[全般設定(General Settings)]ページが開きます。 | ||||
ステップ 7 | [グラフの種類(Chart Type)]に対応するドロップダウン リストをクリックし、適切なフィールドを選択します。 | ||||
ステップ 8 | [グラフ名(Chart Name)]フィールドと [グラフの説明(Chart Description)] フィールドに入力します。 | ||||
ステップ 9 | 必要に応じ、以下に相当するチェック ボックスをチェックします。
| ||||
ステップ 10 | [凡例の位置(Legend Placement)]の横にあるドロップダウン リスト ボックスをクリックして、[右(Right)] または [下(Bottom)] を選択します。 | ||||
ステップ 11 | [凡例ラベルの最大長(Maximum Legend Label Length)]の値を指定します。 | ||||
ステップ 12 | [データの変更による効果(Data Change Effect)]で、[タイプ(Type)] の横にあるドロップダウン リスト ボックスをクリックして、適切なフィールドを選択します。 | ||||
ステップ 13 | [次へ(Next)]をクリックして、[系列の設定(Series Settings)] ページを開きます。 | ||||
ステップ 14 | [系列(Series)]で、[データフィールド(Data Field)] と [ラベルフィールド(Label Field)] の横にあるドロップダウン リスト ボックスをクリックして、適切なフィールドを選択します。
| ||||
ステップ 15 | [ラベル(Labels)]で、[ラベルの位置(Label Position)] と [ラベルの形式(Label Format)] の横にあるドロップダウン リスト ボックスをクリックして、適切なフィールドを選択します。
| ||||
ステップ 16 | [次へ(Next)]をクリックして、[棒グラフの系列の設定(Column Chart Series Settings)] ページを開きます。 | ||||
ステップ 17 | [軸: タイプとフィールド(Axis: Type and Fields)]を選択します。このパネルは、[全般設定(General Settings)] ページで縦方向を選択したときに、右側に表示されます。これは、横方向を選択したときに左側に表示されます。 | ||||
ステップ 18 | [次へ(Next)]をクリックし、[棒グラフ系列の設定(系列の説明/凡例ラベル)(Column Chart Series Settings Series Descriptions/Legend Labels)] ページを開きます。 | ||||
ステップ 19 | [横軸タイプ(Horizontal Axis Type)]および [縦軸タイプ(Vertical Axis Type)] に情報を入力します。軸タイプのオプションは、フィールドのデータ型によって決まります。 | ||||
ステップ 20 | [次へ(Next)]をクリックして、[サマリー(Summary)] ページを開きます。 | ||||
ステップ 21 | [保存してプレビュー(Save & Preview)]ボタンをクリックして、グラフのプレビューを表示します。 | ||||
ステップ 22 | [保存して終了(Save & Exit)]をクリックして、グラフを保存し、ページを終了します。 | ||||
ステップ 23 | 変更を中止して、グラフ エディタを終了するには、[キャンセル(Cancel)] をクリックします。 |
(注) | ライブ データ レポートではグループ化がサポートされていません。 |
レポート グループをフォーマットする手順は、次のとおりです。
ステップ 1 | 左のペインの [レポート(Reports)]ドロワーを選択します。 | ||
ステップ 2 | グループ化のフォーマットを行うレポートを右クリップし、[ビューの編集(Edit views)]を選択します。 | ||
ステップ 3 | グループ化のフォーマットを行うビューを選択し、[編集(Edit)]をクリックします。 | ||
ステップ 4 | [グループ化(Grouping)]ボタンをクリックすると、新規ページが開きます。 | ||
ステップ 5 | [グループ数(Number of Groups)]に適切な値を指定します。レポート内の 0、1、2、または 3 個のグループを選択できます。 | ||
ステップ 6 | [固有の値を縦方向に整列(Unique Value Vertical Alignment)]から、[上(Top)]、[中央(Middle)]、または [下(Bottom)] のいずれかを、レポート列でグループの名前を表示する場所として指定します。
| ||
ステップ 7 | [グループ化基準(Grouped By)]で、ドロップダウン リストから値を選択します。レポート データは、この値によってグループ化されます。 ドロップダウン リストから日付または日時の値を選択する場合、次のいずれかのオプションを選択します。 | ||
ステップ 8 | [サマリーの表示(Show Summary)]チェックボックスをオンにし、グループ化のためのレポートに概要行を含めます。たとえば、エージェント チームごとグループ化し、[サマリーの表示(Show Summary)]チェックボックスをオンにすると、各チームの概要データの行が表示されます。
| ||
ステップ 9 | [ソート基準(Sorted By)]で、ドロップダウン リストから値を選択します。レポート データは、この値によってソートされます。 | ||
ステップ 10 | [OK]をクリックします。 |
(注) | グループ化されたフィールドからドリルダウンを実行できません。フィールドがグループ化されているかどうかを判別するには、次の手順を実行します。
|
フィールド値が特定の値を超えるまたは下回る場合に、フィールドに表示されるしきい値インジケータを設定できます。しきい値インジケータは、グリッドタイプおよびゲージ タイプのビューにのみ設定できます。
ゲージビューのしきい値を設定する方法は、ゲージ ビューの作成手順に記載されています。ゲージビュー作成の詳細については、ゲージ ビューの作成を参照してください。
グリッドビュー作成の詳細については、グリッド ビューの作成を参照してください。グリッドビューのフィールドにしきい値インジケータを設定するには、次の手順を実行します。
ステップ 1 | 左のペインの [レポート(Reports)]ドロワーを選択します。 | ||
ステップ 2 | フィールドしきい値を設定するレポートを右クリックして、[名前を付けて保存(Save As)]を選択します。 [名前を付けて保存(Save As)] ダイアログボックスが表示されます。 | ||
ステップ 3 | [名前(Name)]や [レポートカテゴリ(Report Category)] などの必須フィールドに詳細を入力します。 | ||
ステップ 4 | [OK]をクリックして、このレポートを保存します。 先のステップで指定されたレポート名を持つ新しいレポートが作成されます。 | ||
ステップ 5 | [更新(Refresh)]をクリックして、左ペインの [レポート(Reports)] ドロワーにすべての既存のレポートを表示します。 | ||
ステップ 6 | 最後に保存したレポートを右クリックします。それがフィールドしきい値を設定するレポートであり、[編集(Edit)]を選択します。 ここで、クリック可能な [ビューの編集(Edit views)]オプションが表示されます。 | ||
ステップ 7 | フィールドにしきい値を設定するビューを選択し、[編集(Edit)]をクリックします。 | ||
ステップ 8 | [グリッド内における現在のフィールドの順序(Current field order in the grid)]ボックスで、しきい値を設定するフィールドを右クリックし、[しきい値(Thresholds)] を選択します。 | ||
ステップ 9 | [しきい値(Thresholds)] ウィンドウで、[追加(Add)]をクリックして新しいしきい値を追加します。
| ||
ステップ 10 | [タイプ(Type)]ドロップダウン リストで、現在のフィールド値に対してしきい値をチェックする条件を選択します。次に表示されるフィールドに、必要に応じて、値または式を入力します。
| ||
ステップ 11 | しきい値条件に一致する場合に表示されるフィールドのテキストをフォーマットします。次のオプションを使用します。 | ||
ステップ 12 | [OK]をクリックします。 | ||
ステップ 13 | もう一度 [OK]をクリックしてから、[保存(Save)] をクリックします。
|