|
Use this page to update firmware through your web browser. After
making firmware updates on this page, the device automatically reboots
to activate the new firmware.
Note The access point only updates the
radio firmware if the radio firmware version to be loaded is newer
than the firmware in the radio.
Settings
Current Firmware Versions
This section shows three current firmware version levels:
- System firmware
- Web page
- Radio firmware
Click the underlined Current Version
links to save the current firmware and Web Pages to a local hard
drive or disk.
New Firmware Files
Use this section to browse your hard drive or mapped network drives
to find the desired new files. After you enter filenames for the
firmware to be updated, click Browser Update
Now.
- New File for System Firmware
- New File for Web Pages
- New File for Radio Firmware
Note On versions earlier than 12.00, a File
Server Setup link is present on this page.
Action Buttons
|
Command
|
Description
|
|
Browser Update Now
|
After entering filenames for the firmware you want to update,
click Browser Update Now to load
and install the new firmware. When the update is complete,
the device automatically reboots.
|
|
Done
|
This button sends you back to the Cisco
Services Setup page after updates and saves are complete.
|
|
