|
On this page you enable proxy Mobile IP on the access point and
identify the IP addresses of the authoritative access points on
your wireless network.
Settings
Enable Proxy Mobile IP
This setting enables the proxy Mobile IP feature on the access
point. The default setting is no.
Note Proxy Mobile IP must
also be enabled for the SSID you intend to use to support the feature.
Otherwise, proxy Mobile IP will not work.
Authoritative AP 1-3
These settings identify the IP addresses of up to three authoritative
access points (AAPs) on the wireless network. At least one AAP is
required for the proxy Mobile IP enabled wireless network. The n
represents the number of the authoritative access point. The authoritative
access point is the device that registers with the home agent. After
registering with the home agent, the AAP populates a subnet map
for other access points. The subnet map links the access points
to the home agent to contact and register a mobile client based
on the client’s IP address. For example, if a mobile client appears
with a “30” subnet IP address on the “20” subnet, the access point
must register with the home agent that services subnet “30” mobile
clients.
View Subnet Map Tab
Click the View Subnet Map link to go
to the Subnet Map Table
screen and see a list of home agent IP addresses and their associated
subnet masks.
Action Buttons
|
Command
|
Description
|
|
Apply
|
Activates the new setting. The browser remains on this page.
|
|
OK
|
Applies the new settings and moves the browser back to the
main Setup page.
|
|
Cancel
|
Cancels all changes to the setting, returns the settings
to the previously stored values, and redirects the user back
to the main Setup page.
|
|
Restore Defaults
|
Changes all settings on this page back to the factory default.
|
|
