|
This page allows you to add users to the system, remove users
from the system, and assign user capabilities. To enable system
security, use this page to add a user with Administrator, Identity,
Firmware, and Write capabilities, and then go to the User
Manager screen to enable the security features.
Settings
User List Headings
When adding users to the system, the usernames and capabilities
appear under the User List Headings. If a user has Write, SNMP,
Ident, Firmware, or Admin capabilities, an X appears under those
headings. When you click on a name in the user list, the User
Management window appears. Use the User Management window to
change user capabilities or remove users from the system.
Note When adding a user with SNMP capability, the user name
is also the SNMP community name.
Action Buttons
|
Command
|
Description
|
|
Add New User
|
Use this button to add a user to the system and assign capabilities
to the user. When you click this button, the User
Management window appears.
You enter a username, password, and password confirmation
in the name and password boxes. You click the capability boxes
to assign capabilities.
|
|
Remove User
|
Use this button to remove the user from the system.
|
|
Reset
|
Use this button to reset all boxes to their currently saved
values, clearing any changes you have made.
|
|
Apply
|
Use this button to add the username, password, and capabilities
to the system.
|
Capability Settings
- Write -- Allows the specified user to change system
settings. When you assign Write capability to a user, the user
also automatically receives Admin capability.
- SNMP -- Designates the specified username as an SNMP
community name. The user uses this SNMP community name to perform
SNMP operations. SNMP operations performed by the user are restricted
according to the user's assigned capabilities.
Note -- The User Manager does not have to be enabled
for SNMP communities to operate correctly.
- Ident -- Allows the specified user to change the access
point's identity settings (MAC address, IP address, and SSID).
When you assign Ident capability to a user, the user also automatically
receives Write and Admin capabilities.
- Firmware -- Allows the specified user to update the
access point's firmware. When you assign Firmware capability to
a user, the user also automatically receives Write and Admin capabilities.
- Admin -- Allows the specified user to view all sensitive
system screens and, with write capability, to make changes to
the system.
|
 |
