Accessory Kit Contents
This appendix lists and illustrates the Cisco MDS 9700 Series accessory kit contents (part number 53-4093-XX).
Part Number | Illustration | Description | Quantity |
---|---|---|---|
69-2503-XX | ![]() |
Support rack-mount bracket kit (includes the following parts) | 1 kit |
12-24 x 3/4-in. Phillips screws | 20 per kit | ||
M6 x19-mm Phillips screws | 20 per kit | ||
10-32 x 3/4-inch screws | 20 per kit | ||
Support rack-mount bracket | 2 per kit | ||
800-05097-XX | ![]() |
Console cable connector kit (includes the following parts) | 2 kits |
RJ-45 rollover cable | 1 per kit | ||
DB-9F/RJ-45F PC terminal | 1 per kit | ||
RJ-45/DSUB F/F adapter | 1 per kit | ||
R-J45/DSUB R/P adapter | 1 per kit | ||
DSUB screw lock kit | 1 per kit | ||
69-1815-XX | ![]() |
Ground lug kit (includes the following parts) | 1 kit |
Two-hole lug | 1 per kit | ||
M4 x 8-mm Phillips pan-head screws | 2 per kit | ||
79-0087-XX | ![]() |
ESD wrist strap | 1 per kit |
700-29059-01 | ![]() |
SFP Extractor | 1 per kit |
78-21186-XX | Not applicable | Product Documentation Pointer Card | 1 per kit |
78-17985-XX | Not applicable | China Management Methods Hazardous Substances Content Table | 1 per kit |
![]() Note |
If you do not receive any part listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml. If you purchased this product through a Cisco reseller, you may receive additional contents in your kit, such as documentation, hardware, and power cables. |
Each new switch ships with country-specific power cords—the shipped cords depend on your specification when placing a Cisco MDS switch order. The available power cords for the Cisco MDS 9710 Director are as follows:
-
CAB-9K16A-AUS—power cord, 250-VAC 16-A, Src Plug A, Australia
-
CAB-9K16A-CH—power cord 250-VAC 16-A, Src Plug GB16C, China
-
CAB-9K16A-EU—power cord 250-VAC 16-A, Src Plug CEE, Europe
-
CAB-9K16A-INT—power cord 250-VAC 16-A, Src Pl, International
-
CAB-9K16A-ISR—power cord 250-VAC 16-A, Src Plug SI16, Israel
-
CAB-9K16A-SA—power cord 250-VAC 16-A, Src Plug EL, South Africa
-
CAB-9K16A-SW—power cord 250-VAC 16-A, Src Plug SEV 5, Switzerland
-
CAB-9K16A-US1—power cord 250-VAC 16-A, Src Plug NE, US and Japan
-
CAB-9K16A-US2—power cord 250-VAC 16-A, Src Plug NE, US and Japan
-
CAB-9K16A-KOR—power cord 250-VAC 16-A, Korea, Src Plug
-
CAB-9K20A-NA—power cord 125VAC 20A NEMA 5-20 Plug, North America/Japan
-
CAB-9K16A-ARG—power cord 250VAC 16A, Argentina, Src Plug IR2073-C19
-
CAB-9K16A-BRZ—power cord 250VAC 16A, Brazil, Src Plug EL224-C19
-
CAB-C19-CBN—cabinet jumper power cord, 250 VAC 16A, C20-C19 Connector
The available power cords for the Cisco MDS 9718 Director are as listed in the Cisco MDS 9718 Multilayer Director Datasheet.