New and Changed Information

New and Changed Information

Table 1. New and Changed Features
Feature Description Changed in Release Where Documented

VXLAN EVPN Traffic Engineering

Added support for VXLAN EVPN Traffic Engineering - Multi-Site Egress Load-Balancing feature to improve traffic steering and better utilize inter-DC links across multiple sites.

10.4(3)F

Configuring VXLAN EVPN Traffic Engineering - Multi-Site Egress Load-Balancing

GPO

Added support for Group Policy Option on Cisco Nexus N9K switches.

10.4(3)F

Micro-segmentation for VXLAN Fabrics Using Group Policy Option (GPO)

VXLAN QoS

Added support for VXLAN QoS policies when using a BGW spine on the Cisco Nexus 9808/9804 switches with X9836DM-A and X98900CD-A line cards.

10.4(3)F

Guidelines and Limitations for VXLAN QoS

MPLS SR QoS

Added MPLS SR QoS on the Cisco Nexus 9808/9804 switches with X9836DM-A and X98900CD-A line cards.

10.4(3)F

Guidelines and Limitations for Configuring Seamless Integration of EVPN with L3VPN (MPLS SR)

VXLAN

Added VXLAN support on the Cisco Nexus 9364C-H1 switches.

10.4(3)F

Guidelines and Limitations for VXLAN

Considerations for VXLAN Deployment

Guidelines and Limitations for VXLAN Static Tunnels

Guidelines and Limitations for VXLAN with IPv6 in the Underlay (VXLANv6)

Guidelines and Limitations for VXLAN BGP EVPN

Guidelines and Limitations for VXLAN EVPN with Downstream VNI

Guidelines and Limitations for vPC Fabric Peering

Interoperability with EVPN Multi-Homing Using ESI

Guidelines and Limitations for Interoperability with EVPN Multi-Homing using ESIGuidelines and Limitations for Configuring Seamless Integration of EVPN with L3VPN (MPLS SR)

Guidelines and Limitations for EVPN to L3VPN SRv6 Handoff

Guidelines and Limitations for VXLAN EVPN Multi-Site

Guidelines and Limitations for TRM with Multi-Site

Guidelines and Limitations for Tenant Routed Multicast

Guidelines and Limitations for Layer 3 Tenant Routed Multicast

Guidelines and Limitations for Layer 2/Layer 3 Tenant Routed Multicast (Mixed Mode)

Guidelines and Limitations for TRM Data MDT

Guidelines and Limitations for VXLAN NGOAM

Guidelines and Limitations for VXLAN EVPN Loop Detection and Mitigation

Guidelines and Limitations for VXLAN QoS

Guidelines and Limitations for Port VLAN Mapping

Configuring Inner VLAN and Outer VLAN Mapping on a Trunk Port

Guidelines and Limitations for Port Multi-VLAN Mapping

Guidelines and Limitations for Policy-Based Redirect

Guidelines and Limitations for Proportional Multipath for VNF

Guidelines and Limitations for VXLAN Cross Connect

Guidelines and Limitations for Q-in-VNI

Guidelines and Limitations for Q-in-VNI with L2PT

Guidelines and Limitations for QinQ-QinVNI

Guidelines and Limitations for Secure VXLAN EVPN Multi-Site Using CloudSec

Guidelines and Limitations for Private VLANs over VXLAN

DHCP Snooping in VXLAN BGP EVPN Overview

Guidelines and Limitations for DHCP Snooping on VXLAN

VXLAN source port enhancement

VXLAN UDP source port is enhanced with new configuration options to set the port number range for VXLAN encapsulated packets.

10.4(3)F

Configuring VXLAN UDP Source Port

NGOAM-SLD for Layer-3 interfaces

Added support for NGOAM Southbound Loop Detection (SLD) on Layer-3 ethernet and Layer-3 port-channel interfaces.

10.4(3)F

Guidelines and Limitations for VXLAN NGOAM

Configuring NGOAM Southbound Loop Detection on Layer-3 Interfaces

Multisite Anycast Border Gateway Support

Added support for VXLAN Multi-Site Anycast BGW on Cisco Nexus 9808/9804 switches with Cisco Nexus X9836DM-A and X98900CD-A line cards.

10.4(3)F

Guidelines and Limitations for VXLAN EVPN Multi-Site

TRM support for Multi-Site Anycast BGW

Added support for TRM with Multi-Site Anycast BGW on Cisco Nexus 9808/9804 switches with Cisco Nexus X9836DM-A and X98900CD-A line cards.

10.4(3)F

Guidelines and Limitations for Layer 3 Tenant Routed Multicast

Configuring Layer 3 Tenant Routed Multicast

NGOAM for Cisco Nexus 9800 switches

Added support for NGOAM ping, traceroute, and pathtrace on Cisco Nexus 9800 switches, but Xconnect and Southbound Loop Detection (SLD) are not supported.

10.4(3)F

Guidelines and Limitations for VXLAN NGOAM

Border Spine support for Cisco Nexus 9800 switches

Added support for VXLAN features as border spine on Cisco Nexus 9800 switches.

10.4(3)F

Guidelines and Limitations for VXLAN

Multi-Site support with IPv6 Multicast Underlay in Fabric and IPv6 DCI IR

Added support for VXLAN EVPN and TRM multi-site with Protocol-Independent Multicast (PIMv6) Any-Source Multicast (ASM) on the fabric side and Ingress Replication (IPv6) on the DCI side.

10.4(3)F

About Configuring VXLAN EVPN and TRM with IPv6 Underlay

Guidelines and Limitations for VXLAN EVPN and TRM with IPv6 in the Multicast Underlay

About VXLAN EVPN Multi-Site with IPv6 Underlay

Guidelines and Limitations for VXLAN EVPN Multi-Site with IPv6 Underlay

Enabling VXLAN EVPN Multi-Site with IPv6 Multicast Underlay

Configuring Fabric/DCI Link Tracking

Configuring Fabric External Neighbors

Guidelines and Limitations for Multi-Site with vPC Support

Information About Configuring TRM Multi-Site with IPv6 Underlay

Guidelines and Limitations for TRM Multi-Site with IPv6 Underlay

Configuring TRM Multi-Site with IPv6 Underlay

Verifying TRM with Multi-Site Configuration

VXLAN PIM BiDir underlay support

Added support for PIM BiDir on Cisco Nexus 9300-FX3/GX/GX2/H2R/H1 switches, 9500 switches with 9700-GX line cards.

10.4(3)F

Underlay Considerations

Multicast Routing in the VXLAN Underlay

VXLAN

Added VXLAN support on the Cisco Nexus 93400LD-H1 switches.

10.4(2)F

Guidelines and Limitations for VXLAN

TRMv4 Multi-Site anycast Underlay in Fabric and IR over DCI

Added support for VXLAN EVPN and TRM with IPv6 Multicast Underlay.

10.4(2)F

About Configuring VXLAN EVPN and TRM with IPv6 Underlay

Guidelines and Limitations for VXLAN EVPN and TRM with IPv6 in the Multicast Underlay

Configuring VXLAN EVPN and TRM with IPv6 Multicast Underlay

Example Configuration for VXLAN EVPN and TRM with IPv6 Multicast Underlay

Verifying VXLAN EVPN and TRM with IPv6 Multicast Underlay

Private VLAN

Added support for Private VLAN for Cisco Nexus C9348GCFX3 and Cisco C9348GC-FX3PH.

10.4(1)F

Guidelines and Limitations for Private VLANs over VXLAN

VXLAN EVPN First Hop Security

IPv4 First Hop Security support is provided in a EVPN VXLAN environment so that an host that has been authenticated on one VTEP can move to another VTEP.

10.4(1)F

Configuring First Hop Security

VTEP co-existence with single-active ESI

Added ESI multi-homing support for Rx Single-active mode.

10.4(1)F

Interoperability with EVPN Multi-Homing Using ESI

Example of EVPN Multi-Homing Using ESI

Set outer DSCP for VXLAN encapsulated packets at ingress VTEP The tunnel keyword is added to set the outer DSCP fields on the ingress VTEP.

10.4(1)F

IP to VXLAN with Outer DSCP

Guidelines and Limitations for VXLAN QoS

Setting Outer DSCP on the Ingress VTEP

Classify and rewrite packets based on outer DSCP at the egress VTEP

The tunnel keyword is added to match outer DSCP value on the egress VTEP using an ingress service policy.

10.4(1)F

VXLAN to IP

Guidelines and Limitations for VXLAN QoS

Configuring Type QoS on the Egress VTEP

VXLAN QoS Outer Header Policy for Layer 2

Added new default-vxlan-in-tnl-dscp-policy QoS policy-map template to match on the outer DSCP of the VXLAN packet and re-write CoS in the decapsulated ethernet packet on the egress VTEP.

10.4(1)F

CoS Preservation

Guidelines and Limitations for VXLAN QoS

Preserve CoS Configuration

VXLAN

Added VXLAN support on the Cisco Nexus 9332D-H2R platform switches

10.4(1)F

Guidelines and Limitations for VXLAN

VXLAN source port enhancement

VXLAN UDP source port is enhanced with new configuration options to set the port number range for VXLAN encapsulated packets.

10.4(1)F

Configuring VXLAN UDP Source Port

Split Loopback for VXLAN Multi-Site BGW Deployment

Added details for configuring an NVE Interface Loopback

10.4(1)F

Creating and Configuring an NVE Interface LoopbackMigration from Single NVE Source Loopback Interface to Separate Source Loopback